Giro 开槽制动盘



Fits:
Porsche 996 GT2 without PCCB
Porsche 996 GT3 MKII without PCCB
Porsche 991.1 C2 / C4 / C2S / C4S without PCCB
Porsche 991.2 C2 / C4 / C2S / C4S without PCCB
Porsche 992 C2 / C4 / C2S / C4S without PCCB
The
Girodisc system is a direct replacement for the OE disc on all 996
GT2/GT3's. No modifications are necessary. The disc will bolt directly
to the car and work with OE calipers perfectly. By upgrading your brakes
with lightweight high performance replacements as opposed to a big
brake kit, your factory bias is maintained as well as your ABS
efficiency. The Girodisc front rotors are approx 21.0 lbs vs. 25.6 lbs
for the stock units. This reduction in rotational and unsprung weight
allows for quicker acceleration and suspension response.
The
central hat section of our rotor is made from strictly U.S. sourced
6061-T6 aircraft specification aluminum. The disc is made from our own
proprietary cast iron, poured in the USA and machined from start to
finish in house at Girodisc. The rotor utilizes a curved vane design,
developed in racing to act as a centrifugal pump to force cooling air
through the disc.
The rotor and hat have a floating mount system,
which utilizes 10 high strength alloy steel drive pins, manufactured by
Girodisc in the USA to our own specifications and cadmium plated for a
long lasting corrosion resistance. These pins take the load from braking
actions while maintaining the axial and radial float between the hat
and disc. The pins are secured by class 12.9 cap screws with hardened
washers. In order to keep the rotors from making noise when cold, the
pins are mounted with anti-noise spring washers on the rotor side which
allow the rotor to grow with heat expansion but eliminate the rattle and
noise associated with floating rotors. This float also allows the rotor
to self center between the pads.
Once the Girodisc system is in place, simply replace the cast iron rotor when needed.
Sold/priced per pair
This product is a special order item, allow 5 - 7 working days for delivery.
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKII 2003>>
- Porsche 991 Carrera C2 3.4L (350Bhp)
- Porsche 991 Carrera C2S 3.8L (400Bhp)
- Porsche 991 Carrera C4 3.4L (350Bhp)
- Porsche 991 Carrera C4S 3.8L (400Bhp)
- Porsche 991 Carrera 2 3.0L (370 Bhp)
- Porsche 991 Carrera 2S 3.0L (420 Bhp)
- Porsche 991 Carrera 4 3.0L (370 Bhp)
- Porsche 991 Carrera 4S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 2 3.0L (370 Bhp)
- Porsche 991 Cabriolet 2S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 4 3.0L (370 Bhp)
- Porsche 991 Cabriolet 4S 3.0L (420 Bhp)
- Porsche 991 Targa 4 3.0L (370 Bhp)
- Porsche 991 Targa 4S 3.0L (420 Bhp)
- Porsche 992 Carrera 2 3.0L
- Porsche 992 Carrera 4 3.0L
- Porsche 992 Carrera 2 Cabriolet 3.0L
- Porsche 992 Carrera 4 Cabriolet 3.0L
- Porsche 992 Carrera 2S 3.0L
- Porsche 992 Carrera 4S 3.0L
- Porsche 992 Carrera 2S Cabriolet 3.0L
- Porsche 992 Carrera 4S Cabriolet 3.0L
- Porsche 992 Targa 4 3.0L
- Porsche 992 Targa 4S 3.0L

两件套


适合:
这是适用于以下车辆的 350 毫米垫片和硬件升级版
保时捷 718 Boxster S / GTS
保时捷 718 Cayman S / GTS
保时捷 991.2 C2 / C4 / T
保时捷 992 C2 / C4 / T -使用 S 后垫进行全面扫掠
套件包含:
350MM 制动盘,配有中央钟形件。
刹车盘类型:两片式开槽盘
Girodisc 刹车盘可直接替换原厂刹车盘,并带来显著的性能提升。该刹车盘可与目前此类车辆常用的任何刹车片兼容。
附加信息:
制动性能:转子是在赛车运动中开发的两件式设计,以生产出轻质转子,可以补偿帽子和转子之间的不同膨胀率并消除转子翘曲的可能性。
转子和帽子具有浮动安装系统,该系统采用 10 个高强度合金钢驱动销,可实现轴向和径向浮动。
散热性能更强,重量却毫不逊色: Girodisc 碟片组的重量比原厂系统略轻,但还有一个重要的优势。碟片的直径增加了。这意味着重量从中心帽(它对中心帽没有任何作用)转移到了外圈(它负责主动吸收和散热)。
高品质材料: Girodisc 系统仅采用最高品质的材料和组件。转子采用高碳铁制成,经久耐用,热性能稳定。顶盖部分采用铝坯加工而成,表面采用美观的阳极氧化处理。
本产品为特殊订单商品,请预留 5 - 7 个工作日送达。
成对出售/定价。
- Porsche Boxster S 718 2.5L Manual (350 Bhp)
- Porsche Boxster S 718 2.5L PDK (350 Bhp)
- Porsche Boxster GTS 718 2.5L Manual (365 Bhp)
- Porsche Boxster GTS 718 2.5L PDK (365 Bhp)
- Porsche 991 Carrera 2 3.0L (370 Bhp)
- Porsche 991 Carrera 2S 3.0L (420 Bhp)
- Porsche 991 Carrera 4 3.0L (370 Bhp)
- Porsche 991 Carrera 4S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 2 3.0L (370 Bhp)
- Porsche 991 Cabriolet 2S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 4 3.0L (370 Bhp)
- Porsche 991 Cabriolet 4S 3.0L (420 Bhp)
- Porsche 991 Targa 4 3.0L (370 Bhp)
- Porsche 991 Targa 4S 3.0L (420 Bhp)
- Porsche 991 Turbo Coupe 3.8L (540 Bhp)
- Porsche 991 Turbo S Coupe 3.8L (580 Bhp)
- Porsche 991 Turbo Cabriolet 3.8L (540 Bhp)
- Porsche 991 Turbo S Cabriolet 3.8L (580 Bhp)
- Porsche 992 Carrera 2 3.0L
- Porsche 992 Carrera 4 3.0L
- Porsche 992 Carrera 2 Cabriolet 3.0L
- Porsche 992 Carrera 4 Cabriolet 3.0L
- Porsche 992 Targa 4 3.0L
- Porsche Cayman S 718 2.5L Manual (350Bhp)
- Porsche Cayman S 718 2.5L PDK (350Bhp)
- Porsche Cayman GTS 718 2.5L Manual (365 Bhp)
- Porsche Cayman GTS 718 2.5L PDK (365 Bhp)

包括替换硬件;您将重复使用的唯一部件是您现有的 GiroDisc 帽。


保时捷 981 Cayman GT4 / RS 2016 - 带 PCCB。
--
保时捷 718 (982) Cayman GT4 / RS 2019>> - 带 PCCB。
保时捷 718 (982) Boxster Spyder / RS 2019>> - 带 PCCB。
--
保时捷 991.2 Carrera / S / 4 / 4S / GTS / T 2017-19 - 带 PCCB。
保时捷 991 Turbo / Turbo S / GT2 RS 2014-20 - 带 PCCB。
保时捷 991 GT3 / GT3 RS 2014-21 - 带 PCCB。
--
保时捷 992.1 Carrera S / 4S / GTS 2019-24 - 带 PCCB。
保时捷 992 GT3 / GT3 RS 2021>> - 带 PCCB。
注意:此列表是专为已配备 GiroDisc 双片式转子系统的车辆设计的替换盘。请注意,本产品不能用作独立升级。
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
D2-154S
您正在查看的产品与这些编号存在交叉引用关系
- Porsche Boxster Spyder 718 4.0L (420 Bhp)
- Porsche 991 Turbo 3.8L (520bhp)
- Porsche 991 Turbo S 3.8L (560Bhp)
- Porsche 991 R 4.0L (500 Bhp)
- Porsche 991 GT3 3.8L (475Bhp)
- Porsche 991 GT3 RS 4.0L (500Bhp)
- Porsche 991 Carrera 2 3.0L (370 Bhp)
- Porsche 991 Carrera 2S 3.0L (420 Bhp)
- Porsche 991 Carrera 4 3.0L (370 Bhp)
- Porsche 991 Carrera 4S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 2 3.0L (370 Bhp)
- Porsche 991 Cabriolet 2S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 4 3.0L (370 Bhp)
- Porsche 991 Cabriolet 4S 3.0L (420 Bhp)
- Porsche 991 Targa 4 3.0L (370 Bhp)
- Porsche 991 Targa 4S 3.0L (420 Bhp)
- Porsche 991 Turbo Coupe 3.8L (540 Bhp)
- Porsche 991 Turbo S Coupe 3.8L (580 Bhp)
- Porsche 991 Turbo Cabriolet 3.8L (540 Bhp)
- Porsche 991 Turbo S Cabriolet 3.8L (580 Bhp)
- Porsche 991 Speedster 4.0L (510Bhp)
- Porsche 991 GT3 4.0L (500 Bhp) / GT3 RS 4.0L (520 Bhp)
- Porsche 991 GT2 RS 3.8L PDK (700 bhp)
- Porsche 992 Carrera 2 3.0L
- Porsche 992 Carrera 4 3.0L
- Porsche 992 Carrera 2 Cabriolet 3.0L
- Porsche 992 Carrera 4 Cabriolet 3.0L
- Porsche 992 Carrera 2S 3.0L
- Porsche 992 Carrera 4S 3.0L
- Porsche 992 Carrera 2S Cabriolet 3.0L
- Porsche 992 Carrera 4S Cabriolet 3.0L
- Porsche 992 Targa 4 3.0L
- Porsche 992 Targa 4S 3.0L
- Porsche 992 Speedster 4.0L
- Porsche 992 GT3 4.0L / 992 S/T 4.0L
- Porsche 992 GT3 RS 4.0L
- Porsche Cayman GT4 3.8L 2015-16
- Porsche Cayman GT4 718 4.0L / GT4 RS 718 4.0L

包括替换硬件;您将重复使用的唯一部件是您现有的 GiroDisc 帽。


保时捷 981 Cayman GT4 / RS 2016 - 带 PCCB。
--
保时捷 718 (982) Cayman GT4 / RS 2019>> - 带 PCCB。
保时捷 718 (982) Boxster Spyder / RS 2019>> - 带 PCCB。
--
保时捷 991.2 Carrera / S / 4 / 4S / GTS / T 2017-19 - 带 PCCB。
保时捷 991 Turbo / Turbo S / GT2 RS 2014-20 - 带 PCCB。
保时捷 991 GT3 / GT3 RS 2014-21 - 带 PCCB。
--
保时捷 992.1 Carrera S / 4S / GTS 2019-24 - 带 PCCB。
保时捷 992 GT3 / GT3 RS 2021>> - 带 PCCB。
注意:此列表是专为已配备 GiroDisc 双片式转子系统的车辆设计的替换盘。请注意,本产品不能用作独立升级。
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
D1-154S
您正在查看的产品与这些编号存在交叉引用关系
- Porsche Boxster Spyder 718 4.0L (420 Bhp)
- Porsche 991 Turbo 3.8L (520bhp)
- Porsche 991 Turbo S 3.8L (560Bhp)
- Porsche 991 R 4.0L (500 Bhp)
- Porsche 991 GT3 3.8L (475Bhp)
- Porsche 991 GT3 RS 4.0L (500Bhp)
- Porsche 991 Carrera 2 3.0L (370 Bhp)
- Porsche 991 Carrera 2S 3.0L (420 Bhp)
- Porsche 991 Carrera 4 3.0L (370 Bhp)
- Porsche 991 Carrera 4S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 2 3.0L (370 Bhp)
- Porsche 991 Cabriolet 2S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 4 3.0L (370 Bhp)
- Porsche 991 Cabriolet 4S 3.0L (420 Bhp)
- Porsche 991 Targa 4 3.0L (370 Bhp)
- Porsche 991 Targa 4S 3.0L (420 Bhp)
- Porsche 991 Turbo Coupe 3.8L (540 Bhp)
- Porsche 991 Turbo S Coupe 3.8L (580 Bhp)
- Porsche 991 Turbo Cabriolet 3.8L (540 Bhp)
- Porsche 991 Turbo S Cabriolet 3.8L (580 Bhp)
- Porsche 991 Speedster 4.0L (510Bhp)
- Porsche 991 GT3 4.0L (500 Bhp) / GT3 RS 4.0L (520 Bhp)
- Porsche 991 GT2 RS 3.8L PDK (700 bhp)
- Porsche 992 Carrera 2 3.0L
- Porsche 992 Carrera 4 3.0L
- Porsche 992 Carrera 2 Cabriolet 3.0L
- Porsche 992 Carrera 4 Cabriolet 3.0L
- Porsche 992 Carrera 2S 3.0L
- Porsche 992 Carrera 4S 3.0L
- Porsche 992 Carrera 2S Cabriolet 3.0L
- Porsche 992 Carrera 4S Cabriolet 3.0L
- Porsche 992 Targa 4 3.0L
- Porsche 992 Targa 4S 3.0L
- Porsche 992 Speedster 4.0L
- Porsche 992 GT3 4.0L / 992 S/T 4.0L
- Porsche 992 GT3 RS 4.0L
- Porsche Cayman GT4 3.8L 2015-16
- Porsche Cayman GT4 718 4.0L / GT4 RS 718 4.0L

本产品适合:

保时捷 991、992 和 GT4
刹车油沸腾的问题简单来说就是热量从转子和刹车片通过卡钳活塞直接传递到刹车油中。刹车油沸腾时,会释放出空气,而空气通常是刹车油分子结构的一部分。当然,这些空气是可压缩的,所以刹车踏板踩到底,而不是推动卡钳活塞。量产车在赛道上更容易出现这个问题,因为它们通常不像真正的赛车那样拥有广泛的冷却管道和特殊的刹车材料。真正的赛车刹车卡钳通常配备钛制卡钳活塞,原因之一是钛是一种导热系数低的材料。这意味着它非常不擅长传热。如果你想让刹车油保持低温,那么钛就是一个很好的例子。
Girodisc 的解决方案是,在刹车片背面和活塞之间放置一层薄钛垫片,以防止制动热量传递到活塞和刹车油中,从而防止油液沸腾。以下是各种材料及其相对导热系数的比较:
钛 6AL-4V 6.7 W/mk
钢 52 瓦/米
铝 130 瓦/米
可以看出,钛的导热性远低于钢,尤其是铝。对于那些需要长时间在赛道上驰骋的赛车来说,这些垫片价格低廉,可以有效防止在不合适的时间发生高温导致踏板松动,从而避免日间高昂的油耗。
用水射流切割成精确的尺寸,无需切割、研磨或咒骂。
- Porsche 991 Carrera C2 3.4L (350Bhp)
- Porsche 991 Carrera C2S 3.8L (400Bhp)
- Porsche 991 Carrera C4 3.4L (350Bhp)
- Porsche 991 Carrera C4S 3.8L (400Bhp)
- Porsche 991 Carrera 2 3.0L (370 Bhp)
- Porsche 991 Carrera 2S 3.0L (420 Bhp)
- Porsche 991 Carrera 4 3.0L (370 Bhp)
- Porsche 991 Carrera 4S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 2 3.0L (370 Bhp)
- Porsche 991 Cabriolet 2S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 4 3.0L (370 Bhp)
- Porsche 991 Cabriolet 4S 3.0L (420 Bhp)
- Porsche 991 Targa 4 3.0L (370 Bhp)
- Porsche 991 Targa 4S 3.0L (420 Bhp)
- Porsche 992 Carrera 2 3.0L
- Porsche 992 Carrera 4 3.0L
- Porsche 992 Carrera 2 Cabriolet 3.0L
- Porsche 992 Carrera 4 Cabriolet 3.0L
- Porsche 992 Carrera 2S 3.0L
- Porsche 992 Carrera 4S 3.0L
- Porsche 992 Carrera 2S Cabriolet 3.0L
- Porsche 992 Carrera 4S Cabriolet 3.0L
- Porsche 992 Targa 4 3.0L
- Porsche 992 Targa 4S 3.0L
- Porsche Cayman GT4 3.8L 2015-16
- Porsche Cayman GT4 718 4.0L / GT4 RS 718 4.0L