前控制臂

RSS Lower Control Arm Kit for Porsche Models .
Type: None Adjustable Thrust Arm Bushing



RSS Tarmac Series Motorsport Lower Control Arms are specifically engineered for use on lowered vehicles that have reduced travel struts/dampers such as PASM or M030 option. Alternatively if the car is equipped with high quality aftermarket or motorsport coilover kits ie Bilstein PSS10, KW V3 or Ohlins etc.

The Lower Control Arms are NOT COMPATIBLE with "Base Model Suspension" (long travel struts/dampers) or "Base Model struts/dampers with lowering springs."
Caution: Do not install on vehicles with Base Model struts/dampers as it may result in an unsafe driving condition with possibility of suspension bind when struts/dampers are fully extended or in full drop.

Price: Set of Two Control Arms plus 2 x 1mm/2mm/3mm/7mm Shims.

RSS Tarmac Series Control Arms are manufactured from 6061 aerospace grade billet aluminum. This allows for a more uniform molecular structure
at every point of the arm over the cast motorsports arm giving the customer a more durable and inherently stronger part. Manufacturing from billet
aluminum rather than casting results in less impurities in the metal.

• Completely serviceable - for the extreme, repetitive track-day participant, our high-strength steel alloy spherical bearings (with a friction reducing /longevity increasing Teflon liner) can be replaced unlike the motorsports arm, in which case the customer will have to buy a new set of arms if the spherical bearings are worn.
Additionally, anodized surfaces and zinc-plated steel parts allow for better corrosion resistance against the elements.

• Adjustable suspension geometry - adjust dynamic camber values and roll center heights with our unique zinc-plated steel bushings.

• Solid monoball control arm ends offer a more responsive suspension over the factory one-piece rubber-injected control arm (also uses the same high
strength steel alloy spherical bearing found in our control arm monoball kit).

• Unique design provides more gusseting over the motorsports arms for added strength and aesthetically appealing looks.

Please Check Fitting Guide Before Ordering Click Here

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

357

您正在查看的产品与这些编号存在交叉引用关系

RSS Lower Control Arm Kit for Porsche Models.
Type: None Adjustable Thrust Arm Bushing



RSS Tarmac Series Motorsport Lower Control Arms are specifically engineered for use on lowered vehicles that have reduced travel struts/dampers such as PASM or M030 option. Alternatively if the car is equipped with high quality aftermarket or motorsport coilover kits ie Bilstein PSS10, KW V3 or Ohlins etc.

The Lower Control Arms are NOT COMPATIBLE with "Base Model Suspension" (long travel struts/dampers) or "Base Model struts/dampers with lowering springs."
Caution: Do not install on vehicles with Base Model struts/dampers as it may result in an unsafe driving condition with possibility of suspension bind when struts/dampers are fully extended or in full drop.

Price: Set of Two Control Arms plus 2 x 1mm/2mm/3mm/7mm Shims.

RSS Tarmac Series Control Arms are manufactured from 6061 aerospace grade billet aluminum. This allows for a more uniform molecular structure
at every point of the arm over the cast motorsports arm giving the customer a more durable and inherently stronger part. Manufacturing from billet
aluminum rather than casting results in less impurities in the metal.

• Completely serviceable - for the extreme, repetitive track-day participant, our high-strength steel alloy spherical bearings (with a friction reducing /longevity increasing Teflon liner) can be replaced unlike the motorsports arm, in which case the customer will have to buy a new set of arms if the spherical bearings are worn.
Additionally, anodized surfaces and zinc-plated steel parts allow for better corrosion resistance against the elements.

• Adjustable suspension geometry - adjust dynamic camber values and roll center heights with our unique zinc-plated steel bushings.

• Solid monoball control arm ends offer a more responsive suspension over the factory one-piece rubber-injected control arm (also uses the same high
strength steel alloy spherical bearing found in our control arm monoball kit).

• Unique design provides more gusseting over the motorsports arms for added strength and aesthetically appealing looks.

Please Check Fitting Guide Before Ordering Click Here

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

358

您正在查看的产品与这些编号存在交叉引用关系

This mono ball bush fits to the back of the lower arm "coffin" arm



Fits:
Porsche 986 Boxster
Porsche 987 Boxster
Porsche 987C Cayman
Porsche 996 1998-04
Porsche 997
Porsche 991
Porsche 981 Boxster
Porsche 981 Cayman

Sealed Monoball Cartridges - Front and Rear - Most Porsche owners today, especially those of us who take our cars to the track, have equipped our cars with tires much wider and stickier than stock, which allows higher g-forces to be achieved in cornering and braking. During that type of hard driving, rubber suspension bushings are compressed and flexed by the extreme loads being put on them, defeating your car's finely tuned alignment settings, thereby reducing your braking and cornering potential. Mono balls are a downside-free improvement; because they eliminate four important sources of suspension slop without making your car's ride harsher. Your Porsche will handle and brake with greater precision, predictability, and feedback to the driver. Rennline mono balls are equipped with FK Motorsports bearings, cadmium-plated and Sealed to prevent premature wear due to moisture or dirt contamination, ensuring long track or street life.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

S18SETOF2

您正在查看的产品与这些编号存在交叉引用关系

ADJUSTABLE THRUST ARM BUSHING KIT (For vehicles equipped with Hydraulic Thrust Arm Bushings Only).
SET OF 4. FRONT AXLE ONLY



The RSS Adjustable Thrust Arm Bushing Kit will improve handling and response in 987. 997, 981, GT4, 991 GT3 variants, suspension systems and allows for additional caster adjustments. Eliminates unwanted caster changes in both front and rear suspension under acceleration and deceleration.

AVAILABLE FOR ALL PORSCHE® 987,981, GT4, 997, 991 and 991 GT3, and 991 TURBO
NOT FOR 997 GT3/GT2

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

360

您正在查看的产品与这些编号存在交叉引用关系

RSS 前 LCA litronic 支架。



RSS 部件号 362 将可选的 Litronic 或自适应头灯系统与 Tarmac 系列下控制臂或 OE 2pc 臂集成在一起：

保时捷 986 前后，
保时捷 987 前部（987 后部见 #364），
保时捷 997 前后，
保时捷 981 前轴（981 后轴见 # 387），
保时捷 991 前部（除 GT3/RS 外）

RSS Tarmac 系列后下控制臂的适配器支架。- 每辆车轴 1 个（位于前后驾驶员侧轴上，连接到 OE 传感器臂）

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

362

您正在查看的产品与这些编号存在交叉引用关系

RSS TARMAC 系列 XL（超长）2 件式完整下控制臂套件 - 前轴（2 对）。



RSS Tarmac 系列赛车下控制臂专为降低车身并配备减震器（如 PASM 或 M030 选件）的车辆而设计。或者，如果汽车配备高品质售后市场或赛车绞牙套件（例如 Bilstein PSS10、KW V3 或 Ohlins 等）。

下控制臂与“基本型悬架”（长行程支柱/减震器）或“带降低弹簧的基本型支柱/减震器”不兼容。
注意：请勿安装在带有基本型号支柱/减震器的车辆上，因为当支柱/减震器完全伸展或完全下降时，可能会导致悬架卡住，从而导致不安全的驾驶条件。

适合：
适用于保时捷 987、997/991 C2、C4、Turbo、981/982/718 前轴

包括：
- 可调/非液压更换推力臂衬套，
- 1mm/2mm/3mm/7mm 垫片，
- 球形单球端。
*** 注意： 981 和 991 型号可能需要额外的前 Litronic 或扭矩矢量传感器支架。

RSS Tarmac 系列赛车下控制臂专为降低车身并配备减震器/减震器的车辆而设计。如果您需要帮助确定您的悬架类型，请联系我们。有关具体安装信息，请参阅“底盘安装指南和下控制臂安装说明”（见下图）。

RSS Tarmac 系列 - 赛车控制臂专为要求底盘具有最高精确操控、反馈和控制能力的保时捷驾驶员而设计。该系统经过特殊设计，可提供无与伦比的性能、质量、强度和可维护性。RSS Tarmac 系列控制臂解决了 OEM 橡胶安装悬架组件的性能缺陷，这些组件旨在降低日常道路使用的道路噪音和振动。在控制臂、推力臂、上连杆和束臂等安装组件中使用橡胶注塑件会对最大悬架性能造成损害。软橡胶会在悬架负载下发生偏转，进而导致悬架和底盘之间出现不必要的运动（偏转）。数据还显示，弹簧刚度也可能会发生暂时变化。这些运动和变化会导致驾驶员进行不必要的修正和输入。

特点与优势：
• 可更换子组件：对于极端、重复的赛道爱好者或赛车手来说，我们的高强度
钢合金球面轴承（带有减少摩擦、增加使用寿命的特氟隆衬里）外臂和内臂子组件可更换
与赛车臂不同，赛车臂需要购买一套新的臂，如果
球面轴承磨损。
• 可调悬架几何结构：使用我们的
独特的镀锌钢衬套。
• 实心单球控制臂端：提供更好的操控性和更灵敏的悬架
工厂一体式橡胶注射控制臂，消除衬套偏转（也使用相同的
在我们的控制臂单球套件中发现高强度钢合金球面轴承）。
• 6061 航空级铝坯结构：可实现更均匀的分子结构
在手臂的每一点上，铸造的部件提供了更耐用和固有的
更坚固的部件。用铝坯制造而不是铸造可以减少杂质
金属。
• 阳极氧化铝表面和镀锌钢部件：具有更好的耐腐蚀性
抵御自然元素。

适用于大多数保时捷 996、986、981、982、987 和 997 车型，包括 TURBO、GT2、GT2RS、GT3 和 GT3RS

RSS TARMAC 系列赛车运动悬挂套件已在世界各地各种形式的赛车运动（从公路赛车到拉力赛）中赢得冠军和比赛。RSS 是世界各地专业赛车队、改装车手、赛道爱好者和驾驶爱好者的首选悬挂。
- 2015 年倍耐力世界挑战赛 TC 冠军
- 2014 年国际汽联西班牙拉力赛柏油路面锦标赛
- 2013 年劳力士 GRAND-AM GX 冠军赛

RSS 高性能 Tarmac 系列悬架组件均在美国设计、制造。

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

372

您正在查看的产品与这些编号存在交叉引用关系

RSS TARMAC SERIES 2-PIECE COMPLETE LOWER CONTROL ARM KIT - Front Axle (Pair of 2).



RSS Tarmac Series Motorsport Lower Control Arms are specifically engineered for use on lowered vehicles that have reduced travel struts/dampers such as PASM or M030 option. Alternatively if the car is equipped with high quality aftermarket or motorsport coilover kits ie Bilstein PSS10, KW V3 or Ohlins etc.

The Lower Control Arms are NOT COMPATIBLE with "Base Model Suspension" (long travel struts/dampers) or "Base Model struts/dampers with lowering springs."
Caution: Do not install on vehicles with Base Model struts/dampers as it may result in an unsafe driving condition with possibility of suspension bind when struts/dampers are fully extended or in full drop.

Fits front axle Porsche 987, 997/991 C2, C4, Turbo, 981/982/718

Includes:
- Adjustable/Non-Hydraulic Replacement Thrust Arm Bushings,
- 1mm/2mm/3mm/7mm Shims,
- Spherical Monoball Ends.
** Note: 981 and 991 Models may require additional Front Litronic or Torque Vector Sensor Brackets.

The RSS Tarmac Series – Motorsports Control Arms are designed for the Porsche driver who demands the absolute maximum in precision handling, feedback and control from their chassis. This system has been specially engineered to provide unmatched performance, quality, strength and serviceability. RSS Tarmac Series Control Arms address the performance related shortcomings of the OEM rubber mounted suspension components which were designed to reduce road noise and vibration for everyday street use. The use of rubber injected moldings in mounting components such as the control arms, thrust arms, upper links and toe arms is a compromise in regards to maximum suspension performance. The soft rubber deflects under suspension load which in turn causes unwanted movement (deflection) between the suspension and chassis. Data also shows that temporary changes in spring rates can occur as well. These movements and changes result in unnecessary corrections and inputs from the driver.

FEATURES & BENEFITS
• Replaceable Sub-Assemblies: For the extreme, repetitive track day enthusiast or racer, our high strength steel alloy spherical bearings (with a friction reducing, longevity increasing Teflon liner) outer and inner arm sub-assemblies can be replaced
unlike the motorsports arms, in which case a new set of arms will need to be purchased if the
spherical bearings are worn out.
• Adjustable Suspension Geometry: Adjust dynamic camber values and roll center heights with our
unique zinc plated steel bushings.
• Solid Monoball Control Arm Ends: Offers better handling and a more responsive suspension over the
factory one-piece rubber injected control arm by eliminating bushing deflection (also uses the same
high strength steel alloy spherical bearing found in our control arm monoball kit).
• 6061 Aerospace Grade Billet Aluminum Construction: Allows for a more uniform molecular structure
at every point of the arm over the cast components providing a more durable and inherently
stronger part. Manufacturing from billet aluminum rather than casting results in fewer impurities in
the metal.
• Anodized Aluminum Surfaces and Zinc Plated Steel Parts: Allows for better corrosion resistance
against the elements.

AVAILABLE FOR MOST PORSCHE 996, 986, 981, 982, 987 & 997 MODELS INCLUDING TURBO, GT2, GT2RS, GT3 & GT3RS

RSS TARMAC SERIES Motorsports Suspension Kits have been winning championships and races in various forms of motorsport (Road Racing to Rally) around the world. RSS is the suspension of choice of professional race teams, tuners, track day junkies, and driving enthusiasts around the world.
- 2015 PIRELLI WORLD CHALLENGE TC CHAMPIONS
- 2014 FIA SPANISH RALLY TARMAC CHAMPIONS
- 2013 ROLEX GRAND-AM GX CHAMPIONS
RSS High Performance Tarmac Series Suspension Components are designed, engineered and manufactured on location here in the USA.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

361

您正在查看的产品与这些编号存在交叉引用关系

Front toe steer / bump steer kit XLARGE.



SET OF 2
replacement for 99634713104, 99634713103, 99134713100,

Fits:
FOR ALL Porsche 981, 982, GT4, 991 INCLUDING TURBO & GT3/GT3RS.

Also would fit Porsche 986, 996, 997, 987 that are running extreme amounts of negative camber or that have widened the front track width.

The RSS Adjustable Front Toe/Bump Steer XL Kit is designed for Porsche models that have been lowered. This kit will help minimize the suspension geometry change in the front of the vehicle. Allows for bump steer adjustment. Improves handling, feedback and control.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

371

您正在查看的产品与这些编号存在交叉引用关系

Inner Spherical Bearing (Mono-ball) End Kit: SET OF 2.



Fits
Porsche 991 GT3 OE Front Control Arms
Porsche 981 GT4 Front and Rear Control Arms
Porsche 986, 987, 996, 997 with GT3/RS OE Front or Rear Split Control Arms,

Fits any RSS Tarmac Series Lower Control Arm or replaces any OE Porsche Split Arm Inner Bushing.
Provides a Bolt On Mono-Ball Performance Solution replacing rubber mounted OE inner mono-balls. RSS Longer studs allow for more negative camber adjustment / gain vs. OE inner bushing. For camber shim kits see RSS Part # 308.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

3-256

您正在查看的产品与这些编号存在交叉引用关系

保时捷车型下控制臂调整垫片



价格：一个对齐垫片

RSS 定位垫片专为配合工厂或售后市场的两件式赛车风格控制臂使用而设计。非常适合在安装过程中获得更多负外倾角和调整轮距。

垫片有多种尺寸，包括 1 毫米、2 毫米、3 毫米、5 毫米、7 毫米、10 毫米和 11 毫米。

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

300

您正在查看的产品与这些编号存在交叉引用关系

RSS Tarmac Series Lower Control Arm - Outer Ball Joint Pin Rebuild Kit. 1 Kit Per RSS Lower Control Arm (Fits: Part #s: 356, 357, 361, 372, 373, 374 and 366)



Includes:
1 x Tapered Stud,
1 x Upper Lock Nut,
1 x Lower Lock Nut and
4 x Roll Center Spacers/Washers.

1 Kit Per RSS Lower Control Arm (Fits: Part #s: 356, 357, 361, 372, 373, 374 and 366).

USER NOTE: A new 380 Kit should be installed once ball joint pin has been removed from hub. See Lower Control Arm Notes.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

380

您正在查看的产品与这些编号存在交叉引用关系

前部不可调推力臂衬套套件。前轴。适用于其他品牌的脚轮/长度可调式推力臂。适用于保时捷 987/997/991/981/982/718/GT4

4 件套。仅前轴



RSS 不可调推力臂衬套套件将改善悬架系统的操控性和响应性。消除前悬架或后悬架在加速和减速时不必要的前轮倾角变化。

适用于所有保时捷® 987、997 (非 GT#)、981、GT4、991、991 GT3/RS。

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

323

您正在查看的产品与这些编号存在交叉引用关系

外球接头销重建套件，适用于前保险杠 RSS 前束转向连杆/臂。适合零件编号 370 + 371



套件包括：1 个锥形螺柱，1 个上部锁紧螺母，1 个下部锁紧螺母，2 个螺柱垫片/垫圈。

用户注意：将球头销从轮毂中取出后，应安装新的 382 套件。

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

382

您正在查看的产品与这些编号存在交叉引用关系

Porsche GT4 + 991 GT3/RS Torque Vector/Litronic Sensor Bracket Set (Front XL Inner Monoball #3-307).

Brand:

Adapts the XL Inner Monoballs for use with OEM Torque Vectoring/Litronic System Sensors.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

389

您正在查看的产品与这些编号存在交叉引用关系

Inner Spherical Bearing (Mono-ball) End Kit: SET OF 2.

Brand:

Fits
Porsche 991 GT3  (not RS) OE Front Control Arms,
Porsche 981 GT4 Front and Rear Control Arms,
Porsche 986, 987, 996, 997 with GT3/RS OE Front or Rear Split Control Arms,
Fits any RSS Tarmac Series Lower Control Arm or replaces any OE Porsche Split Arm Inner Bushing. Provides a Bolt On Mono-Ball Performance Solution replacing rubber mounted OE inner mono-balls.

The Extra Long Monoball Housing Design (+15mm) allows for more negative camber adjustment / gain vs. standard aftermarket or OE inner bushings. The XL Design allows for proper stud engagement between inner and outer control arm with when running aggressive negative camber settings. For camber shim kits see RSS Part # 308.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

3-307

您正在查看的产品与这些编号存在交叉引用关系