前扰流板/保险杠

Carbon fibre front bumper dive plane kit.

Available in Matte Carbon Fibre



Fits
Porsche 981 Cayman GT4

The Dive Planes for the Porsche 981 Cayman GT4 are specifically designed to increase front-end downforce, increase the high-pressure airflow to the factory intake duct, and to keep drag increase minimal.

These units are constructed from 1.5mm thick pre-preg, autoclaved cured, 2x2 twill carbon, with a matte clear finish.

Dive planes also referred to as canards, allow you to shift the aero balance forward, possibly aiding you and your setup in balancing out a large rear wing or diffuser.

Kit Includes
• Dive Plane x 4 (Upper x 2, Lower x 2)
• 3M VHB Tape (4 Pieces, 1 for each Dive Plane)
• Install Template
• Hardware Kit, Includes All Hardware for Install

Carbon fibre front bumper dive plane kit.

Available in Matte Carbon Fibre



Fits
Porsche 987 Cayman - 2005 to 2012 (Gen 1 and Gen 2)

The Verus Engineering Dive Plane (Canard) Kit adds front-end downforce without the necessity of moving the front splitter further forward.

Utilizing state-of-the-art analysis software during the R&D process, we were able to extract more performance for the given build volume; increasing downforce generated from the dive planes.

This dive plane kit was designed for owners looking to shift aero balance forward to help aid in balancing out a large rear wing or diffuser.

Kit Includes
• Dive Plane x 2 (Left and Right)
• 3M VHB Double Sided Tape, Cut to Dive Plane Size (2)
• Template (2)
• Hardware Kit, Includes All Hardware Necessary for Install

Features
Reduce Lift (Increase Downforce)
Shift Aero Balance Forward
Allows for Fine Tuning of Aero Balancing (Forward Biased)
Help Seal Sides of Car
Evacuate Air From the Front of the Wheel Well

Specification
CFD Optimized Design
Pre-Preg, Autoclave Cured, Carbon Fiber Composition
Stainless Hardware Used Throughout 
Made in the U.S.A.

Carbon front splitter kit.



Fits
Porsche 981 Cayman GT4

Front splitters are very effective at producing front end downforce without increasing drag significantly. They do this by creating a large pressure delta between the top and bottom surfaces. We then incrementally improved the front splitter by adding design tweaks to the underside of the splitter to improve flow with our carbon splitter diffusers.

The splitter is produced from a carbon thermoplastic, which is the same material used in high forms of Motorsports. The material is not brittle, so no more issues with cracking like carbon fiber and ABS. It will not grab and bend under the car like aluminum units either. It is a great splitter material.

The air dam is used to bring the splitter flat with the vehicle's underbody and improve performance further. The air dam is produced with pre-preg carbon fiber and is cured in an autoclave for reduced weight and improved strength.

Kit Includes
• Carbon Spill Plate (2)
• Carbon Front Air Dam
• Carbon Composite Splitter
• Carbon Splitter Diffuser (2)
• Sheet Aluminum Bracket (10 Pieces)
• Hardware Kit Including All Necessary Bolts/Nuts/Washers

Features
Greatly Increases Front End Downforce
Produces High Downforce for Large Rear Wings
Capable of Handling 300+ Lbs
Constructed From Carbon Thermoplastic, Which Offers Strength, Low Weight, Durability, and a Great Appearance
Same Material Used in Various Forms of Racing, Including Indy Car, NASCAR, and F1
Non-Invasive / Easy Install

Carbon front splitter kit.



Fits
Porsche 987.2 Cayman - 2009 to 2012 Gen 2 Only

Front splitters are very effective at producing front end downforce without increasing drag significantly. They do this by creating a large pressure delta between the top and bottom surfaces. We then incrementally improved the front splitter by adding design tweaks to the underside of the splitter to improve flow while working with the OE plastic underbody panels.

The splitter is produced from a carbon thermoplastic, which is the same material used in high forms of Motorsports. The material is not brittle, so no more issues with cracking like carbon fiber and ABS. It will not grab and bend under the car like aluminum units either. It is a great splitter material.

The air dam is used to bring the splitter flat with the vehicle's underbody and improve performance further. The air dam is produced with pre-preg carbon fiber and is cured in an autoclave for reduced weight and improved strength.

Kit Includes
• Carbon Front Air Dam
• Carbon Composite Front Splitter Blade
• Hardware Kit, Includes All Hardware Necessary for Install

Features
Greatly Increases Front End Downforce
Produces High Downforce for Large Rear Wings
Capable of Handling 300+ Lbs
Constructed From Carbon Thermoplastic, Which Offers Strength, Low Weight, Durability, and a Great Appearance
Same Material Used in Various Forms of Racing, Including Indy Car, NASCAR, and F1
Non-Invasive Install

Specifications
Front Splitter is Manufactured From Carbon Thermoplastic, Offering Superior Strength, Weight, Durability, and Appearance to Many Other Options
Will Not Grab and Bend Surfaces Like Aluminum Units
Will Not Crack and Break Like Carbon and ABS Units
Abrasive Resistant While Stiff
Carbon Fiber Air Dam
Stainless Hardware Throughout
Aircraft Nut Plates Used in the Air Dam

雾灯边框套装碳纤维。
成对出售

適用於:
保时捷 987.1 Cayman - 2005 年至 2008 年
保时捷 987.1 Cayman S - 2005 年至 2008 年

产品描述
Rennline 的新款碳纤维雾灯挡板是为您的 987 提供 OEM+ 的绝佳方式，同时可替换通常因日晒褪色或岩石磨损的部件。这款雾灯挡板采用手工铺设的碳纤维制成，采用最先进的制造技术，实现工厂装配和精加工。

• 高品质施工，采用最新技术
• 手工铺设的碳纤维，具有高光泽的紫外线防护涂层
• 使用工厂雾灯挡板的 3D 扫描进行 CAD 设计
• 安装方式与工厂部件类似，直接夹在保险杠上
• OEM装配和完成

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

E408

您正在查看的产品与这些编号存在交叉引用关系

带 DRL 灯的雾灯罩。左右各一对。

適用於:
保时捷 987C Cayman

要激活附加灯带，您必须将其连接到雾灯。

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

987631720

您正在查看的产品与这些编号存在交叉引用关系

Fog lamp covers, Carbon. PAIR



Fits:
Porsche 987C Cayman

Material:
Carbon Fibre

Product Type:
Replica

Special order:  Please note it usually takes 8 weeks for us to receive this from supplier as this is special order part.


相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

98750570000

您正在查看的产品与这些编号存在交叉引用关系

碳纤维前保险杠和扰流板，一体式制造。

#斯福扎#

适合：
保时捷 981 Cayman GT4 2016

通过将 OEM 塑料部件更换为性能更好、更引人注目的碳纤维部件（带有外露碳纤维编织），升级 981 Cayman GT4 风格。作为替代品并减轻 GT4 重量的绝佳解决方案。

采用斜纹 2×2 200 克织物，在高温高压下模制的碳纤维预浸料高压釜中制造，最终涂有光泽度 90 的清漆。

请注意：这是按订单生产的特殊订单商品。在某些情况下，请留出 4 - 5 周的时间进行交货。一旦您下订单，就无法取消此供应商的特殊订单商品。

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

SFC981505010

您正在查看的产品与这些编号存在交叉引用关系

原装碳纤维 SAR 前下巴扰流板。重量极轻，下压力更大，设计极具运动感。包括 2 个部件，左侧和右侧均采用碳纤维制造。

适合：
保时捷 987C Cayman

材料：
碳

产品类别：
速度艺术

这是适用于 Cayman 的 SpeedART 2 件式 SAR 前下巴扰流板。它提供更具侵略性的运动设计，具有更大的下压力和可调节襟翼。这包括 2 个部件，左和右，由高品质德国玻璃纤维制成。以前称为 RS 风格。这件作品添加到工厂保险杠上。

适合：
保时捷 987C Cayman

材料：
由玻璃纤维制成。GRP

产品类别：
速度艺术

speedART SRS 3 件式前扰流板加装在原厂保险杠上。基于 2 件式 SAR 前部附加件 (P87503001B)，SRS 增加了中央部分，形成前部扩散器以增加下压力。还有真碳纤维可供选择。以前称为 RSR 款式。采用优质玻璃纤维制成。

适合：
保时捷 987C Cayman

材料：
由玻璃纤维制成。GRP

产品类别：
速度艺术

718 GT4 RS 前保险杠改装套件



适合：
保时捷 981 Boxster
保时捷 981C Cayman

请注意：由于这些保险杠的制造方式独特，它们通常需要进行一定程度的修整/返工才能安装到车辆上。在保险杠干装并获准进行进一步车身工作之前，请不要涂底漆或油漆。

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

98150531718

您正在查看的产品与这些编号存在交叉引用关系

GT4 风格前保险杠完整套件，适用于不带前照灯清洗器的汽车。
包括所有格栅、网格、下唇扰流板、空气管道、车牌架和固定装置。

材质： PU塑料

適用於:
适用于不带大灯清洗器的汽车
无停车传感器孔
保时捷 981 Cayman / 981 Boxster 2013-16




适用于保时捷 981 Cayman/Boxster 的前保险杠 GT4 风格套件是一款多功能升级选项，旨在提升保时捷的外观和性能。

增强空气动力学：
GT4 风格套件旨在改善空气动力学性能，增强保时捷的稳定性和操控性。

大胆造型：
该套件具有强劲的运动型设计，使您的保时捷具有独特而引人注目的外观。

耐用材质：
该套件采用高品质材料制成，确保长久耐用且耐磨损。

兼容性：
该套件专为保时捷 981 Cayman/Boxster 车型设计，确保无缝贴合。

请注意：
如果您的汽车有前停车传感器，则需要在喷漆前在保险杠上钻孔。

在 Design911，我们致力于帮助您找到适合您的保时捷 981 Cayman/Boxster 的完美前保险杠 GT4 风格套件。我们的专家团队随时准备提供专业建议，帮助您做出明智的决定。无论您喜欢 OEM 的精确性还是售后市场的实惠性，我们都有知识和资源来指导您。立即联系我们，让我们用理想的前保险杠 GT4 风格套件改造您的保时捷，以满足您的需求和偏好。

请注意：交货时间通常为 6-8 周。

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

98150531380

您正在查看的产品与这些编号存在交叉引用关系

Front bumper GT4 Style complete kit for cars WITH headlamp washer.
Includes all grilles, mesh, lower lip spoiler, air ducts, number plate holder and fixings.



This is a top quality conversion kit 

Fits:
For cars WITH headlamp washer
WITHOUT parking sensor hole
Porsche 981 Cayman / 981 Boxster 2013-16


The Front Bumper GT4 Style Kit for Porsche 981 Cayman/Boxster is a versatile upgrade option designed to elevate the appearance and performance of your Porsche.

Enhanced Aerodynamics: The GT4 Style Kit is engineered to improve aerodynamics, enhancing the stability and handling of your Porsche.

Aggressive Styling: The kit features an aggressive, sporty design that gives your Porsche a distinct and eye-catching look.

Durable Material: Constructed from high-quality materials, this kit ensures longevity and resistance to wear and tear.

Compatibility: The kit is specifically designed for Porsche 981 Cayman/Boxster models, ensuring a seamless fit.

Please note:

If your car has front parking sensors the holes will need to be drilled in to the bumper before painting.

At Design911, we are committed to assisting you in finding the perfect Front Bumper GT4 Style Kit for your Porsche 981 Cayman/Boxster. Our team of experts is ready to provide professional advice to help you make an informed decision. Whether you prefer the precision of OEM or the affordability of aftermarket, we have the knowledge and resources to guide you. Contact us today, and let us transform your Porsche with the ideal Front Bumper GT4 Style Kit to meet your needs and preferences.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

98150531381

您正在查看的产品与这些编号存在交叉引用关系

碳纤维前保险杠下扰流板，由 3 部分组成：中央扰流板、左侧扰流板和右侧扰流板。光亮表面。

#斯福扎#

适合：
保时捷 981 Cayman GT4 2016

通过将 OEM 塑料部件更换为性能更好、更引人注目的碳纤维部件（带有外露碳纤维编织），升级 981 Cayman GT4 风格。作为替代品并减轻 GT4 重量的绝佳解决方案。

采用斜纹 2×2 200 克织物，在高温高压下模制的碳纤维预浸料高压釜中制造，最终涂有光泽度 90 的清漆。

请注意：这是按订单生产的特殊订单商品。在某些情况下，请留出 4 - 5 周的时间进行交货。一旦您下订单，就无法取消此供应商的特殊订单商品。

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

SFC981505525

您正在查看的产品与这些编号存在交叉引用关系

Boxster 987 SpeedART CS 前保险杠。
此保险杠还需要 2 x 997 Carrera 雾灯/驱动灯，可作为额外购买

适合：
保时捷 Boxster 987
保时捷卡曼 987C

材料：
由玻璃纤维制成。GRP

产品类别：
速度艺术