发动机罩/后盖 /扰流板启动器及电机

3" eRam Kit™ electric wing system for 997 Turbo
Closest height version for Cabriolet

Do not risk Pentosin® Power Steering fluid leaks into your engine bay or down the bumper. Extensively designed and engineered to permanently fix the overly complex and troublesome factory hydraulic mechanism. Since 2015, our eRam Kit™ is the best permanent economical solution to maintain a fully functional wing!

The dealer wants up to £1000's to replace a troublesome hydraulic mechanism. Others offer a rebuild service, simply tearing down and repairing the same failure prone mechanism, often using solvents to swell internal o-rings. Another offers shiny aftermarket parts for the internal hydraulic mechanism made from stainless instead of brass. They do not even attempt to call it a permanent solution, claiming it is "easy" to change out cheap internal o-rings to refill and bleed the mechanism when it fails again… Who wants to go through that EVER let alone more than once? It is only a matter of time until hot engine bay conditions destroy one of many hydraulic components that are failure prone!
The eRam Kit™ wing elevator consists of two pre-assembled self-contained electric Rams that simply bolt onto the engine lid with absolutely NO modifications. The eRam Kit™ includes a small electronic "MicroModule Device™" that connects to the factory wiring and prevents the dreaded SPOILER WARNING. Nearly plug and play! WORKS EXACTLY LIKE THE FACTORY MECHANISM.

The patented eRam Kit™ comes with two self-contained electric eRams, all fittings, fasteners, electrical connections, and the tiny MicroModule Device™ which prevents the spoiler warning. No cutting, drilling or modification to any part of the car. Easy install – about the same skill level as changing brake pads. Installation of the eRam Kit™ takes about 2 hours for anyone with any mechanical skill. Most customers install the eRam Kit™ themselves using our illustrated instruction guide and video (sent with purchase). Easily maintained – no special tools needed. Easily modified – for example to exchange for different length rams or to add Dust & Moisture Boots.

Fits:
Porsche 997 Turbo

Click 'Zoom in' for large parts diagram.
Diagram ref no 2 (LEFT) & 3 (RIGHT)

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

EK7-3-S

您正在查看的产品与这些编号存在交叉引用关系

4.8" eRam Kit™ electric wing system for 997 Turbo
Similar height to GT3 and GT4 wings, provides Superior Downforce.

Do not risk Pentosin® Power Steering fluid leaks into your engine bay or down the bumper. Extensively designed and engineered to permanently fix the overly complex and troublesome factory hydraulic mechanism. Since 2015, our eRam Kit™ is the best permanent economical solution to maintain a fully functional wing!

The dealer wants up to £1000's to replace a troublesome hydraulic mechanism. Others offer a rebuild service, simply tearing down and repairing the same failure prone mechanism, often using solvents to swell internal o-rings. Another offers shiny aftermarket parts for the internal hydraulic mechanism made from stainless instead of brass. They do not even attempt to call it a permanent solution, claiming it is "easy" to change out cheap internal o-rings to refill and bleed the mechanism when it fails again… Who wants to go through that EVER let alone more than once? It is only a matter of time until hot engine bay conditions destroy one of many hydraulic components that are failure prone!
The eRam Kit™ wing elevator consists of two pre-assembled self-contained electric Rams that simply bolt onto the engine lid with absolutely NO modifications. The eRam Kit™ includes a small electronic "MicroModule Device™" that connects to the factory wiring and prevents the dreaded SPOILER WARNING. Nearly plug and play! WORKS EXACTLY LIKE THE FACTORY MECHANISM.

The patented eRam Kit™ comes with two self-contained electric eRams, all fittings, fasteners, electrical connections, and the tiny MicroModule Device™ which prevents the spoiler warning. No cutting, drilling or modification to any part of the car. Easy install – about the same skill level as changing brake pads. Installation of the eRam Kit™ takes about 2 hours for anyone with any mechanical skill. Most customers install the eRam Kit™ themselves using our illustrated instruction guide and video (sent with purchase). Easily maintained – no special tools needed. Easily modified – for example to exchange for different length rams or to add Dust & Moisture Boots.

Fits:
Porsche 997 Turbo

Click 'Zoom in' for large parts diagram.
Diagram ref no 2 (LEFT) & 3 (RIGHT)

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

EK7-4.8-S

您正在查看的产品与这些编号存在交叉引用关系

4" eRam Kit™ electric wing system for 997 Turbo
Creates very excellent downforce, wing looks great when up.

Do not risk Pentosin® Power Steering fluid leaks into your engine bay or down the bumper. Extensively designed and engineered to permanently fix the overly complex and troublesome factory hydraulic mechanism. Since 2015, our eRam Kit™ is the best permanent economical solution to maintain a fully functional wing!

The dealer wants up to £1000's to replace a troublesome hydraulic mechanism. Others offer a rebuild service, simply tearing down and repairing the same failure prone mechanism, often using solvents to swell internal o-rings. Another offers shiny aftermarket parts for the internal hydraulic mechanism made from stainless instead of brass. They do not even attempt to call it a permanent solution, claiming it is "easy" to change out cheap internal o-rings to refill and bleed the mechanism when it fails again… Who wants to go through that EVER let alone more than once? It is only a matter of time until hot engine bay conditions destroy one of many hydraulic components that are failure prone!
The eRam Kit™ wing elevator consists of two pre-assembled self-contained electric Rams that simply bolt onto the engine lid with absolutely NO modifications. The eRam Kit™ includes a small electronic "MicroModule Device™" that connects to the factory wiring and prevents the dreaded SPOILER WARNING. Nearly plug and play! WORKS EXACTLY LIKE THE FACTORY MECHANISM.

The patented eRam Kit™ comes with two self-contained electric eRams, all fittings, fasteners, electrical connections, and the tiny MicroModule Device™ which prevents the spoiler warning. No cutting, drilling or modification to any part of the car. Easy install – about the same skill level as changing brake pads. Installation of the eRam Kit™ takes about 2 hours for anyone with any mechanical skill. Most customers install the eRam Kit™ themselves using our illustrated instruction guide and video (sent with purchase). Easily maintained – no special tools needed. Easily modified – for example to exchange for different length rams or to add Dust & Moisture Boots.

Fits:
Porsche 997 Turbo

Click 'Zoom in' for large parts diagram.
Diagram ref no 2 (LEFT) & 3 (RIGHT)

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

EK7-4-S

您正在查看的产品与这些编号存在交叉引用关系

发动机罩和后盖开启器开关面板。黑色哑光。



適用於:
保时捷 987 Boxster MKI / MKII 2005-12
保时捷 987C Cayman MKI / MKII 2005>>
保时捷 997 Carrera MKI / MKII 2005>> COUPE/ CABRIO
保时捷 997 Turbo MKI / MKII 2007>>
保时捷 997 GT3 2007-11

本产品取代了保时捷的旧零件编号：
- 99761310501A05

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99761310502A05

您正在查看的产品与这些编号存在交叉引用关系

发动机罩和后盖开启器开关面板。黑色哑光。



適用於:
保时捷 987 Boxster MKI / MKII 2005-12
保时捷 987C Cayman MKI / MKII 2005>>
保时捷 997 Carrera MKI / MKII 2005>> COUPE/ CABRIO
保时捷 997 Turbo MKI / MKII 2007>>
保时捷 997 GT3 2007-11

本产品取代了保时捷的旧零件编号：
- 99761310501A05

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99761310503A05

您正在查看的产品与这些编号存在交叉引用关系

DUST & MOISTURE BOOTS
Rubber boot set to protect your eRam Kit™ investment.

Fits:
Porsche 996 Turbo 2001-2005
Porsche 997 Turbo 2007-2009
Porsche 997 Turbo 2009-2013

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

EK-BOOTS

您正在查看的产品与这些编号存在交叉引用关系

固定位置后扰流板柱，高度可手动调节。

#科布伦茨#

適用於:
保时捷 997 Turbo - 2007 年至 2012 年

使用这些固定和可调节的扰流板支架替换经常出现故障的后扰流板液压缸。

这些支架由 6061 铝坯制成，可调节范围从完全下降到上升 4 英寸，增量为 0.5 英寸
只需几分钟即可轻松快速地进行调整

套件包含：
禁用 OEM 扰流板撞杆的说明
左、右固定扰流板支架
不锈钢五金套件

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99751295100

您正在查看的产品与这些编号存在交叉引用关系

2" eRam Kit™ electric wing system for 997 Turbo
Up/Down Speed of 5 sec
NOT RECOMMENDED FOR CABRIO

Do not risk Pentosin® Power Steering fluid leaks into your engine bay or down the bumper. Extensively designed and engineered to permanently fix the overly complex and troublesome factory hydraulic mechanism. Since 2015, our eRam Kit™ is the best permanent economical solution to maintain a fully functional wing!

The dealer wants up to £1000's to replace a troublesome hydraulic mechanism. Others offer a rebuild service, simply tearing down and repairing the same failure prone mechanism, often using solvents to swell internal o-rings. Another offers shiny aftermarket parts for the internal hydraulic mechanism made from stainless instead of brass. They do not even attempt to call it a permanent solution, claiming it is "easy" to change out cheap internal o-rings to refill and bleed the mechanism when it fails again… Who wants to go through that EVER let alone more than once? It is only a matter of time until hot engine bay conditions destroy one of many hydraulic components that are failure prone!
The eRam Kit™ wing elevator consists of two pre-assembled self-contained electric Rams that simply bolt onto the engine lid with absolutely NO modifications. The eRam Kit™ includes a small electronic "MicroModule Device™" that connects to the factory wiring and prevents the dreaded SPOILER WARNING. Nearly plug and play! WORKS EXACTLY LIKE THE FACTORY MECHANISM.

The patented eRam Kit™ comes with two self-contained electric eRams, all fittings, fasteners, electrical connections, and the tiny MicroModule Device™ which prevents the spoiler warning. No cutting, drilling or modification to any part of the car. Easy install – about the same skill level as changing brake pads. Installation of the eRam Kit™ takes about 2 hours for anyone with any mechanical skill. Most customers install the eRam Kit™ themselves using our illustrated instruction guide and video (sent with purchase). Easily maintained – no special tools needed. Easily modified – for example to exchange for different length rams or to add Dust & Moisture Boots.

Fits:
Porsche 997 Turbo

Click 'Zoom in' for large parts diagram.
Diagram ref no 2 (LEFT) & 3 (RIGHT)

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

EK7-2-SS

您正在查看的产品与这些编号存在交叉引用关系

Rear spoiler electric rams pump Porsche 997TT



Fits:
Porsche 997 Turbo



相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99751294300

您正在查看的产品与这些编号存在交叉引用关系