后控制臂

Eccentric adjuster locking kit.
4pcs in kit - 1 kit required per car



Fits
Porsche 986 Boxster
Porsche 987 Boxster and Cayman
Porsche 996
Porsche 997

Prevent Alignment Settings From Slipping

Losing on the track is bad enough, but losing the alignment on the track is even worse. Prevent your eccentric adjuster bolts from slipping under heavy cornering loads with our Eccentric Adjuster Locking Kit.

Complete kit includes four lockout plates. Two plates are used to lock the rear toe adjusters and two plates to lock the camber settings.

Retain convenience and functionality of the eccentric adjuster. The original functionality of the adjuster is completely preserved. The plate can be set in any position.

Retain full range of the adjuster. These lockout plates do not limit adjustment range in any way, maximum toe and negative camber can be achieved with these plates in place.

Works with OEM fixed length arms and our adjustable length control arms as well.The unique design features a slotted hole that counters the slot provided for the adjuster. The plate can be moved up and down to reach any camber or toe setting desirable.

The Locking plates function by increasing the friction that holds the factory eccentric adjusters in place. These plates are guaranteed to prevent any adjuster slip even under aggressive driving conditions.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

2180017

您正在查看的产品与这些编号存在交叉引用关系

Eccentric lock kit. Porsche 993 / 986 / 987 / 996 / 997



Fits:
Porsche 986 Boxster
Porsche 987 Boxster / Cayman
Porsche 993
Porsche 996
Porsche 997

Product Description
Rennline's Eccentric lock kits replaces the factory Eccentric adjustment system which are commonly known to cause loss of alignment during track use. These locks allow you to securely anchor the subframe side of your adjustable links, and ensures that your alignment does not change under heavy load.

Sold as a pair this includes 2 bolts, 2 lock nuts, 4 washers and 4 eccentric locks.

993 - Can be used on upper control arms, and lower toe arms.
996/997/986/987 - Can be used on lower control arms and lower toe arms.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

S40

您正在查看的产品与这些编号存在交叉引用关系

BBi Autosport Front & Rear Adjustable Thrust Arm Bushing Kit for Porsche 996 / 997



Features :

•   Provides two eccentric mounting points
•   Used to adjust for increasing or decreasing wheelbase, and adjustable caster.
•   A must-have for extended lower control arms (GT3 control arms or eccentric monoballs) to correct for unintended caster change
•   Compatible with all stock Porsche 996 and 997 lower control arms (including Porsche
Motorsport Cup arms)
•   Complete set of 4 (2 front & 2 rear)

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

BBITHRUSTBUSH9697

您正在查看的产品与这些编号存在交叉引用关系

BBi Autosport Front & Rear Adjustable Thrust Arm Kit for Porsche 996 / 997 / 986 / 987



Fits
996 and 997 Front and Rear
986 and 987 Front Only

Features :

•   Connects the Lower Control Arm to the subframe
•   Provides precision caster adjustability
•   Spacers included for setting stock or anti-squat and anti-dive configurations
•   Each Kit Includes Pair of 2 Links
•   Fits both front and rear axles

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

BBITHRUST9697

您正在查看的产品与这些编号存在交叉引用关系

GT3 ERX Inner lower control arm (LCA), Rubber Bushing Module.



Fits:
Porsche 996, 997, 991, 992 W/ GT3 Style Control Arms (Front/Rear),
Porsche Boxster, Cayman 1999>> W/ GT3 Style Control Arms (Front Only)

Elephant Racing has developed GT3 type inner lower control arms.
These are readily available and dimensionally identical to the factory parts. They can be mix-matched with the factory type inner/outer lower control arm and shims.
The Elephant Racing inner arm is offered in two flavors, GT3 Street Inner Lower Control Arm and GT3 Cup Inner Lower Control Arm. GT3 street is equipped with a rubber bushed central bushing and the GT3 Cup is equipped with a solid caster adjustable central bushing.
Our GT3 Street Inner Lower Control Arm has sport-hardness rubber bushings to provide upgraded control and driver feedback while still offering good road noise isolation.
Our GT3 Cup Inner Lower Control Arms uses weather sealed spherical bearings. These deliver superior precision, control, and performance. They will transmit a bit more road noise than rubber bushings.

These can be paired with a choice of GT3 outer control lower arms:
– Elephant Racing GT3 Street Outer Lower Control Arms
– Elephant Racing GT3 Cup Outer Lower Control Arms
– Factory GT3 Street Outer Lower Control Arms

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

2180039

您正在查看的产品与这些编号存在交叉引用关系

Rennline GT3 lower control arm litronics bracket.



Fits:
Porsche 996 / 997 / 986 / 987 / 981 / 991

This litronics shim kit will provide you with everything you need to use your factory litronics with your upgraded GT3 control arms. Each kit will cover either the front or the back.
Some vehicles will require a front and rear kit if equipping both front and rear with GT3 control arms.

Litronic Bracket for adjustable control arms.



Fits
Porsche 996 - Front & Rear with Litronic headlights
Porsche 997 - Front & Rear with Litronic headlights
Porsche 991 - Front & Rear with Litronic headlights

Porsche 986 - Front Only with Litronic headlights
Porsche 987 - Front Only with Litronic headlights
Porsche 981 - Front Only with Litronic headlights,

Price is for 1 and 2 Required per axle

This bracket is required for cars that are originally equipped with the Litronic headlights. This adapter bracket attaches to the headlight angle sensor.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

2180009

您正在查看的产品与这些编号存在交叉引用关系

Litronic Bracket for adjustable control arms.



Fits
Porsche 987 - Rear with Litronic headlights
Porsche 981 - Rear with Litronic headlights

Price is for 1 and 2 Required per axle

This bracket is required for cars that are originally equipped with the Litronic headlights. This adapter bracket attaches to the headlight angle sensor.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

218002

您正在查看的产品与这些编号存在交叉引用关系

PowerFlex 下臂衬套修理套件。（不包括金属臂）

适用于保时捷下臂的聚氨酯替换衬套套件。

该套件适合前部或后部的一只下臂。
包括 1 个中心衬套和 1 个后臂衬套。
请注意，这些部件应由工程师安装。

适合：
前臂或后臂
保时捷 986 Boxster 1994-04
保时捷 996 1998-04
一套 2 件，用于一个下臂，可安装在前臂或后臂上。请注意，这些部件应由工程师安装。

适合：
仅限后臂：
保时捷 987 Boxster 05>>
保时捷 987C Cayman 05>>
保时捷 997 05>>
一套 2 件，适用于一个下臂，仅适用于 987 / 997 型号的后臂。请注意，这些部件应由工程师安装。

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

PFF57-502

您正在查看的产品与这些编号存在交叉引用关系

PowerFlex 下臂中心衬套。



適用於:
前臂或后臂
保时捷 986 Boxster 1994-04
保时捷 996 1998-04
2 套下臂，可安装在前臂或后臂上。请注意，这些部件应由工程师安装。

適用於:
仅限后臂：
保时捷 987 Boxster 05>>
保时捷 987C Cayman 05>>
保时捷 997 05>>
2 套下臂，仅适用于 987 / 997 型号的后臂。请注意，这些部件应由工程师安装。

2 套，用于前臂和后臂
请注意，这些部件应由工程师安装。

图表参考：
2 号 - 前部 / 5 号 - 后部

OEM 零件编号：996341053 / 996341941 / 997341041
OEM 零件编号：997341042 / 997341041
OEM 零件编号：997331053

Powerflex。 用聚氨酯悬架衬套替换您的汽车橡胶悬架衬套将为您带来以下好处：

- 更好的抓地力
- 恒定转向几何
- 延长轮胎寿命
- 转向更灵敏
- 悬架部件的使用寿命更长



相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

PFF57-502

您正在查看的产品与这些编号存在交叉引用关系

Powerflex 黑色系列 PFF57-502BLK
更换赛车下臂中心聚氨酯衬套。



適用於:
前臂或后臂
保时捷 986 Boxster 1994-04
保时捷 996 1998-04
2 套下臂，可安装在前臂或后臂上。请注意，这些部件应由工程师安装。

適用於:
仅限后臂：
保时捷 987 Boxster 05>>
保时捷 987C Cayman 05>>
保时捷 997 05>>
2 套下臂，仅适用于 987 / 997 型号的后臂。请注意，这些部件应由工程师安装。

2 套，用于前臂和后臂
请注意，这些部件应由工程师安装。

图表参考：
2 号 - 前部 / 5 号 - 后部

OEM 零件编号：996341053 / 996341941 / 997341041
OEM 零件编号：997341042 / 997341041
OEM 零件编号：997331053

Powerflex 黑色系列- 专为赛道设计 - 随时准备比赛 - 精心打造，力求做到最好。

Powerflex 黑色系列衬套采用 95 Shore A 复合材料制成，可最大程度地控制底盘几何形状。这种复合材料的抗负载能力比标准橡胶高出 80%，硬度比我们的紫色高性能材料高出 25%。

如果您的要求纯粹是为了极致的操控性和底盘性能，那么 Powerflex Black 系列是独一无二的，可为您的底盘提供最精确、最准确的定位。

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

PFF57-502BLK

您正在查看的产品与这些编号存在交叉引用关系

PowerFlex 下臂后衬套

更换赛车下臂后聚氨酯衬套。

2 套，用于两个前臂和后臂
请注意，这些部件应由工程师安装。

適用於:
前臂或后臂
保时捷 986 Boxster 1994-04
保时捷 996 1998-04
2 套下臂，可安装在前臂或后臂上。请注意，这些部件应由工程师安装。

適用於:
仅限后臂：
保时捷 987 Boxster 05>>
保时捷 987C Cayman 05>>
保时捷 997 05>>
2 套下臂，仅适用于 987 / 997 型号的后臂。请注意，这些部件应由工程师安装。

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

PFF57-503

您正在查看的产品与这些编号存在交叉引用关系

Powerflex 黑色系列下臂后衬套

更换赛车下臂后聚氨酯衬套。

適用於:
前臂或后臂
保时捷 986 Boxster 1994-04
保时捷 996 1998-04
2 套下臂，可安装在前臂或后臂上。请注意，这些部件应由工程师安装。

適用於:
仅限后臂：
保时捷 987 Boxster 05>>
保时捷 987C Cayman 05>>
保时捷 997 05>>
2 套下臂，仅适用于 987 / 997 型号的后臂。请注意，这些部件应由工程师安装。

2 套，用于两个前臂和后臂
请注意，这些部件应由工程师安装。

Powerflex 黑色系列- 专为赛道设计 - 随时准备比赛 - 精心打造，力求做到最好。

Powerflex 黑色系列衬套采用 95 Shore A 复合材料制成，可最大程度地控制底盘几何形状。这种复合材料的抗负载能力比标准橡胶高出 80%，硬度比我们的紫色高性能材料高出 25%。

如果您的要求纯粹是为了极致的操控性和底盘性能，那么 Powerflex Black 系列是独一无二的，可为您的底盘提供最精确、最准确的定位。

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

PFF57-503BLK

您正在查看的产品与这些编号存在交叉引用关系

Lower control arm bushes (Centre)
SET OF 4 Bushes for Two Control Arms.
Fits OEM or upgraded GT2/GT3 control arms.



Fits:
Porsche 996 C2/C4/C4S 1998-2005
Porsche 996 TURBO/GT3/GT2

*Porsche Boxster 986 Front Only

Replacement lower control arm bushings to improve the handling characteristics of the Porsche 996 These non-adjustable lower control arm bushings eliminate the unwanted caster changes while the car is under acceleration and braking. The Rohler lower control arm bushings are made from 6061 T6 aluminum to help stiffen the Porsche suspension without adding road harshness to the interior of the car. These bushings are a great improvement for anyone who frequents the track in their 996 cars.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

3602409964

您正在查看的产品与这些编号存在交叉引用关系

下叉臂中央衬套拆卸和安装工具。

需要 1 个工具

#大象赛跑#

适合
保时捷 986 Boxster -前部和后部
保时捷 987 Boxster 和 Cayman -前部和后部
保时捷 996 -前部和后部
保时捷 997 -前部和后部
保时捷 981 Boxster 和 Cayman -仅前部
保时捷 991 -仅正面

简化 Monoball 产品和更换衬套的安装过程。

我们的两件式杯形和活塞工具可轻松取出和插入衬套，无需拆卸轮架或控制臂。无需使用车间压力机。这些工具的设计精确贴合衬套周长，可防止衬套意外损坏并确保正确安装。

我们有用于 LCA 中央衬套、后直立 LCA 衬套和后直立减震器支架衬套的工具。

996、997、986、987 和 981 上的前后控制臂
前下控制臂仅适用于 991

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

2260019

您正在查看的产品与这些编号存在交叉引用关系

Lower control arm centre solid bushing. 
Price is EACH



Fits:
Porsche 986 Boxster
Porsche 996 1997-05

High Density Thrust Arm Bushing Kit for the 996 and 986 Boxster is a great way to further perfect your suspension setup. These bushings offer the benefits of a harder durometer without the noise and ride harshness associated with solid aluminium bushings. A great option for dual use street/track vehicles that want another measure of adjust ability and stability without sacrificing ride quality.
25% increase in durometer

Material:
6082-T6 Aluminum
When using in 997/987 requires spacers/shims

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99634105319

您正在查看的产品与这些编号存在交叉引用关系