前控制臂

PowerFlex 下臂衬套修理套件。（不包括金属臂）

适用于保时捷下臂的聚氨酯替换衬套套件。

该套件适合前部或后部的一只下臂。
包括 1 个中心衬套和 1 个后臂衬套。
请注意，这些部件应由工程师安装。

适合：
前臂或后臂
保时捷 986 Boxster 1994-04
保时捷 996 1998-04
一套 2 件，用于一个下臂，可安装在前臂或后臂上。请注意，这些部件应由工程师安装。

适合：
仅限后臂：
保时捷 987 Boxster 05>>
保时捷 987C Cayman 05>>
保时捷 997 05>>
一套 2 件，适用于一个下臂，仅适用于 987 / 997 型号的后臂。请注意，这些部件应由工程师安装。

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

PFF57-502

您正在查看的产品与这些编号存在交叉引用关系

PowerFlex 下臂中心衬套。



適用於:
前臂或后臂
保时捷 986 Boxster 1994-04
保时捷 996 1998-04
2 套下臂，可安装在前臂或后臂上。请注意，这些部件应由工程师安装。

適用於:
仅限后臂：
保时捷 987 Boxster 05>>
保时捷 987C Cayman 05>>
保时捷 997 05>>
2 套下臂，仅适用于 987 / 997 型号的后臂。请注意，这些部件应由工程师安装。

2 套，用于前臂和后臂
请注意，这些部件应由工程师安装。

图表参考：
2 号 - 前部 / 5 号 - 后部

OEM 零件编号：996341053 / 996341941 / 997341041
OEM 零件编号：997341042 / 997341041
OEM 零件编号：997331053

Powerflex。 用聚氨酯悬架衬套替换您的汽车橡胶悬架衬套将为您带来以下好处：

- 更好的抓地力
- 恒定转向几何
- 延长轮胎寿命
- 转向更灵敏
- 悬架部件的使用寿命更长



相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

PFF57-502

您正在查看的产品与这些编号存在交叉引用关系

Powerflex 黑色系列 PFF57-502BLK
更换赛车下臂中心聚氨酯衬套。



適用於:
前臂或后臂
保时捷 986 Boxster 1994-04
保时捷 996 1998-04
2 套下臂，可安装在前臂或后臂上。请注意，这些部件应由工程师安装。

適用於:
仅限后臂：
保时捷 987 Boxster 05>>
保时捷 987C Cayman 05>>
保时捷 997 05>>
2 套下臂，仅适用于 987 / 997 型号的后臂。请注意，这些部件应由工程师安装。

2 套，用于前臂和后臂
请注意，这些部件应由工程师安装。

图表参考：
2 号 - 前部 / 5 号 - 后部

OEM 零件编号：996341053 / 996341941 / 997341041
OEM 零件编号：997341042 / 997341041
OEM 零件编号：997331053

Powerflex 黑色系列- 专为赛道设计 - 随时准备比赛 - 精心打造，力求做到最好。

Powerflex 黑色系列衬套采用 95 Shore A 复合材料制成，可最大程度地控制底盘几何形状。这种复合材料的抗负载能力比标准橡胶高出 80%，硬度比我们的紫色高性能材料高出 25%。

如果您的要求纯粹是为了极致的操控性和底盘性能，那么 Powerflex Black 系列是独一无二的，可为您的底盘提供最精确、最准确的定位。

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

PFF57-502BLK

您正在查看的产品与这些编号存在交叉引用关系

PowerFlex 下臂后衬套

更换赛车下臂后聚氨酯衬套。

2 套，用于两个前臂和后臂
请注意，这些部件应由工程师安装。

適用於:
前臂或后臂
保时捷 986 Boxster 1994-04
保时捷 996 1998-04
2 套下臂，可安装在前臂或后臂上。请注意，这些部件应由工程师安装。

適用於:
仅限后臂：
保时捷 987 Boxster 05>>
保时捷 987C Cayman 05>>
保时捷 997 05>>
2 套下臂，仅适用于 987 / 997 型号的后臂。请注意，这些部件应由工程师安装。

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

PFF57-503

您正在查看的产品与这些编号存在交叉引用关系

Lower control arm bushes (Centre)
SET OF 4 Bushes for Two Control Arms.
Fits OEM or upgraded GT2/GT3 control arms.



Fits:
Porsche 996 C2/C4/C4S 1998-2005
Porsche 996 TURBO/GT3/GT2

*Porsche Boxster 986 Front Only

Replacement lower control arm bushings to improve the handling characteristics of the Porsche 996 These non-adjustable lower control arm bushings eliminate the unwanted caster changes while the car is under acceleration and braking. The Rohler lower control arm bushings are made from 6061 T6 aluminum to help stiffen the Porsche suspension without adding road harshness to the interior of the car. These bushings are a great improvement for anyone who frequents the track in their 996 cars.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

3602409964

您正在查看的产品与这些编号存在交叉引用关系

下叉臂中央衬套拆卸和安装工具。

需要 1 个工具

#大象赛跑#

适合
保时捷 986 Boxster -前部和后部
保时捷 987 Boxster 和 Cayman -前部和后部
保时捷 996 -前部和后部
保时捷 997 -前部和后部
保时捷 981 Boxster 和 Cayman -仅前部
保时捷 991 -仅正面

简化 Monoball 产品和更换衬套的安装过程。

我们的两件式杯形和活塞工具可轻松取出和插入衬套，无需拆卸轮架或控制臂。无需使用车间压力机。这些工具的设计精确贴合衬套周长，可防止衬套意外损坏并确保正确安装。

我们有用于 LCA 中央衬套、后直立 LCA 衬套和后直立减震器支架衬套的工具。

996、997、986、987 和 981 上的前后控制臂
前下控制臂仅适用于 991

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

2260019

您正在查看的产品与这些编号存在交叉引用关系

Lower control arm centre solid bushing. 
Price is EACH



Fits:
Porsche 986 Boxster
Porsche 996 1997-05

High Density Thrust Arm Bushing Kit for the 996 and 986 Boxster is a great way to further perfect your suspension setup. These bushings offer the benefits of a harder durometer without the noise and ride harshness associated with solid aluminium bushings. A great option for dual use street/track vehicles that want another measure of adjust ability and stability without sacrificing ride quality.
25% increase in durometer

Material:
6082-T6 Aluminum
When using in 997/987 requires spacers/shims

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99634105319

您正在查看的产品与这些编号存在交叉引用关系

下控制臂偏心中心实心衬套。
价格为每个



减少负载下的脚轮变化
允许更轻松、更快速、更精确的悬架调整“螺栓固定”解决方案；适合工厂控制臂，无需进一步修改

適用於:
保时捷 986 Boxster
保时捷 996 1997-05

适用于 996 和 986 Boxster 的高密度推力臂衬套套件是进一步完善悬架设置的绝佳方式。这些衬套具有硬度更高的优点，但不会像实心铝衬套那样产生噪音和行驶颠簸。对于需要另一种调整能力和稳定性而不牺牲行驶质量的两用街道/赛道车辆来说，这是一个不错的选择。
硬度增加25%

材料：
6082-T6 铝
在 997/987 中使用时需要垫片/垫片

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99634105319

您正在查看的产品与这些编号存在交叉引用关系

Lower control arm eccentric monoballs.
1 kit required per axle



Fits
Porsche 986 Boxster - Front and Rear
Porsche 987 Boxster and Cayman - Front and Rear
Porsche 996 - Front and Rear
Porsche 997 - Front and Rear
Porsche 981 - Front and Rear
Porsche 718 - Front and Rear
Porsche 991 - Front Only

Our Eccentric Control Arm Monoball Cartridges replace inner rubber bushings with spherical bearings, providing low friction and precisely holding camber settings.
The eccentric design allows increasing or decreasing camber, as needed.

Increasing Camber

Position the eccentric to maximize Lower Wishbone length, adding about .86 degree of negative camber on the 996/997 rear suspension, about .36 degree of negative camber on the Boxster rear suspension, and .39 degrees on the 996/997/Boxster front suspension.
Cost effective for cars that just want extra camber. For even more camber and ease of adjustment, see our GT3 type fully adjustable control arms.

Decreasing Camber

Position the eccentric to minimize Lower Wishbone length. Perfect for lowered cars that have too much negative camber and want to get back to factory camber settings to minimize tire wear on the street. Makes rear camber about .86 degrees more positive & front camber about .39 degrees positive for 996/997 while Boxsters will get about .39 degrees positive front and .36 degrees positive rear.



Made from hardened steel, plated and weather-sealed, these bearings are made to last. Fits the front or rear stock and GT3 type control arms.

Sized to fit factory original control arms. Not compatible with some aftermarket replacement control arms that use a larger non-stock size bushing.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

2260006

您正在查看的产品与这些编号存在交叉引用关系

BBi Autosport front/rear lower control arm kit for Porsche 996/997/991/987/981 except GT4
Fits cars with and without PASM



Features :

•   Improved two piece 996 GT3 lower control arm design
•   Stronger than cast motorsport Cup arms
•   Allows proper camber adjustment
•   Uses GT3 shims to adjust camber & lower control arm length (sold separately)
•   High-strength steel alloy spherical bearings, completely serviceable unlike the motorsports arms
•   Sealed monoball inner bearing
•   Allows easy access to inner arm hardware
•   Includes adjustable thrust arm bushings to adjust caster and wheelbase
•   A must have for all track and race enthusiast
•   Each kit includes pair of 2 arms
•   Fits both front and rear axles
•   Compatible with all 996/997/991/987/981 models except GT4

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

BBILOWRCNTRL9697

您正在查看的产品与这些编号存在交叉引用关系

Lower control arm rear solid bushing. 
Price is for one arm bush 



Fits:
Porsche 986 Boxster
Porsche 996 1997-05

High Density Thrust Arm Bushing Kit for the 996 and 986 Boxster is a great way to further perfect your suspension setup. These bushings offer the benefits of a harder durometer without the noise and ride harshness associated with solid aluminium bushings. A great option for dual use street/track vehicles that want another measure of adjust ability and stability without sacrificing ride quality.
25% increase in durometer

Material:
6082-T6 Aluminum
When using in 997/987 requires spacers/shims

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99634105319

您正在查看的产品与这些编号存在交叉引用关系

Spacer kit for Eibach adjustable control arms 572610K.
This kit will allow the arms to be fitted onto cars with hydraulic bush.



PRICE IS FOR A SET OF 2.

Front or Rear Fitment:
Porsche 996
Porsche 986

Front Fitment only:
Porsche 997 GT2/GT3

Rear Fitment only:
Porsche 997 Carrera
Porsche 997 Turbo
Porsche 987
Porsche 981

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

5.72612K

您正在查看的产品与这些编号存在交叉引用关系

六角螺母 - M8 - 用于赛车控制臂。

单独出售；每只手臂需要 2 个。

工厂适配：
保时捷 996 GT2 2001-05
保时捷 996 GT3 1999-05
保时捷 997-1 GT2 2007-09
保时捷 997 GT3 2007-11

在以下保时捷车型上从标准控制臂升级到赛车控制臂时也需要这些垫圈：
保时捷 996 Carrera 1998-05
保时捷 996 Turbo 2001-05

图表参考 26。

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

90007606402

您正在查看的产品与这些编号存在交叉引用关系

赛车运动可调控制臂。保时捷 996 GT2 / GT3 / GT3RS



適用於:
保时捷 996 GT2 / GT3 / GT3RS

请点击“放大”来查看图表。
替换第 21 件

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99634112

您正在查看的产品与这些编号存在交叉引用关系

RSS Lower Control Arm Kit for Porsche Models .
Type: None Adjustable Thrust Arm Bushing



RSS Tarmac Series Motorsport Lower Control Arms are specifically engineered for use on lowered vehicles that have reduced travel struts/dampers such as PASM or M030 option. Alternatively if the car is equipped with high quality aftermarket or motorsport coilover kits ie Bilstein PSS10, KW V3 or Ohlins etc.

The Lower Control Arms are NOT COMPATIBLE with "Base Model Suspension" (long travel struts/dampers) or "Base Model struts/dampers with lowering springs."
Caution: Do not install on vehicles with Base Model struts/dampers as it may result in an unsafe driving condition with possibility of suspension bind when struts/dampers are fully extended or in full drop.

Price: Set of Two Control Arms plus 2 x 1mm/2mm/3mm/7mm Shims.

RSS Tarmac Series Control Arms are manufactured from 6061 aerospace grade billet aluminum. This allows for a more uniform molecular structure
at every point of the arm over the cast motorsports arm giving the customer a more durable and inherently stronger part. Manufacturing from billet
aluminum rather than casting results in less impurities in the metal.

• Completely serviceable - for the extreme, repetitive track-day participant, our high-strength steel alloy spherical bearings (with a friction reducing /longevity increasing Teflon liner) can be replaced unlike the motorsports arm, in which case the customer will have to buy a new set of arms if the spherical bearings are worn.
Additionally, anodized surfaces and zinc-plated steel parts allow for better corrosion resistance against the elements.

• Adjustable suspension geometry - adjust dynamic camber values and roll center heights with our unique zinc-plated steel bushings.

• Solid monoball control arm ends offer a more responsive suspension over the factory one-piece rubber-injected control arm (also uses the same high
strength steel alloy spherical bearing found in our control arm monoball kit).

• Unique design provides more gusseting over the motorsports arms for added strength and aesthetically appealing looks.

Please Check Fitting Guide Before Ordering Click Here

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

357

您正在查看的产品与这些编号存在交叉引用关系

RSS Lower Control Arm Kit for Porsche Models.
Type: None Adjustable Thrust Arm Bushing



RSS Tarmac Series Motorsport Lower Control Arms are specifically engineered for use on lowered vehicles that have reduced travel struts/dampers such as PASM or M030 option. Alternatively if the car is equipped with high quality aftermarket or motorsport coilover kits ie Bilstein PSS10, KW V3 or Ohlins etc.

The Lower Control Arms are NOT COMPATIBLE with "Base Model Suspension" (long travel struts/dampers) or "Base Model struts/dampers with lowering springs."
Caution: Do not install on vehicles with Base Model struts/dampers as it may result in an unsafe driving condition with possibility of suspension bind when struts/dampers are fully extended or in full drop.

Price: Set of Two Control Arms plus 2 x 1mm/2mm/3mm/7mm Shims.

RSS Tarmac Series Control Arms are manufactured from 6061 aerospace grade billet aluminum. This allows for a more uniform molecular structure
at every point of the arm over the cast motorsports arm giving the customer a more durable and inherently stronger part. Manufacturing from billet
aluminum rather than casting results in less impurities in the metal.

• Completely serviceable - for the extreme, repetitive track-day participant, our high-strength steel alloy spherical bearings (with a friction reducing /longevity increasing Teflon liner) can be replaced unlike the motorsports arm, in which case the customer will have to buy a new set of arms if the spherical bearings are worn.
Additionally, anodized surfaces and zinc-plated steel parts allow for better corrosion resistance against the elements.

• Adjustable suspension geometry - adjust dynamic camber values and roll center heights with our unique zinc-plated steel bushings.

• Solid monoball control arm ends offer a more responsive suspension over the factory one-piece rubber-injected control arm (also uses the same high
strength steel alloy spherical bearing found in our control arm monoball kit).

• Unique design provides more gusseting over the motorsports arms for added strength and aesthetically appealing looks.

Please Check Fitting Guide Before Ordering Click Here

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

358

您正在查看的产品与这些编号存在交叉引用关系