发动机罩/后盖 /扰流板启动器及电机

4" eRam Kit™ electric wing system for 996 Turbo
Fast version that creates very good downforce, wing looks great when up.

Do not risk Pentosin® Power Steering fluid leaks into your engine bay or down the bumper. Extensively designed and engineered to permanently fix the overly complex and troublesome factory hydraulic mechanism. Since 2015, our eRam Kit™ is the best permanent economical solution to maintain a fully functional wing!

The dealer wants up to £1000's to replace a troublesome hydraulic mechanism. Others offer a rebuild service, simply tearing down and repairing the same failure prone mechanism, often using solvents to swell internal o-rings. Another offers shiny aftermarket parts for the internal hydraulic mechanism made from stainless instead of brass. They do not even attempt to call it a permanent solution, claiming it is "easy" to change out cheap internal o-rings to refill and bleed the mechanism when it fails again… Who wants to go through that EVER let alone more than once? It is only a matter of time until hot engine bay conditions destroy one of many hydraulic components that are failure prone!
The eRam Kit™ wing elevator consists of two pre-assembled self-contained electric Rams that simply bolt onto the engine lid with absolutely NO modifications. The eRam Kit™ includes a small electronic "MicroModule Device™" that connects to the factory wiring and prevents the dreaded SPOILER WARNING. Nearly plug and play! WORKS EXACTLY LIKE THE FACTORY MECHANISM.

The patented eRam Kit™ comes with two self-contained electric eRams, all fittings, fasteners, electrical connections, and the tiny MicroModule Device™ which prevents the spoiler warning. No cutting, drilling or modification to any part of the car. Easy install – about the same skill level as changing brake pads. Installation of the eRam Kit™ takes about 2 hours for anyone with any mechanical skill. Most customers install the eRam Kit™ themselves using our illustrated instruction guide and video (sent with purchase). Easily maintained – no special tools needed. Easily modified – for example to exchange for different length rams or to add Dust & Moisture Boots.

Fits:
Porsche 996 Turbo 2001-2005

Click 'Zoom in' for large parts diagram.
Diagram ref no 2 (LEFT) & 3 (RIGHT)

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

EK6-4-S

您正在查看的产品与这些编号存在交叉引用关系

后扰流板驱动装置和微动开关的塑料支架。

適用於:
保时捷 996 Turbo 2001-05

注意：该部件未在零件图中显示，但它是驱动装置的塑料支架，对应于图表参考 11、12 和 13。

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99661314800

您正在查看的产品与这些编号存在交叉引用关系

DUST & MOISTURE BOOTS
Rubber boot set to protect your eRam Kit™ investment.

Fits:
Porsche 996 Turbo 2001-2005
Porsche 997 Turbo 2007-2009
Porsche 997 Turbo 2009-2013

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

EK-BOOTS

您正在查看的产品与这些编号存在交叉引用关系

Front Bonnet Opener Microswitch.



Fits:
Porsche 986 Boxster 1997-04
Porsche 996 1998-05
Porsche 996 Turbo/GT2 2001-05
Porsche 996 GT3 1999-05
Porsche Carrera GT 2004-06

Click 'Zoom in' for large parts diagram.
Diagram ref no 9

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99661320600

您正在查看的产品与这些编号存在交叉引用关系

防止剧透警告 MicroModule 设备

固定翼或扰流板警告问题？MicroModule Device™ 是 996 Turbo 车主的绝佳解决方案，他们拥有固定翼或收到可怕的扰流板警告。适用于带有集成行李箱盖和机翼（如空气动力学套件机翼或其他售后机翼）的 Turbo。MicroModule Device™ 可轻松连接到工厂接线，并防止出现所有扰流板警告。比新的 GT2 或 GT3 盖线束便宜。全套图解分步说明随订单通过电子邮件发送。

注意：每个 Rennkit eRam Kit 均包含此内容。

適用於:
保时捷 996 Turbo 2001-2005




相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

Micro-M

您正在查看的产品与这些编号存在交叉引用关系

后扰流板/盖执行器。

#保时捷#

適用於:
保时捷 996 1999-2005
保时捷 996 Turbo 2001-2005

单击“放大”可查看大部件图。
图表参考编号 8

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99651205500

您正在查看的产品与这些编号存在交叉引用关系

适用于 996 Turbo 的 2 英寸 eRam Kit™ 电动翼系统
上升/下降速度为 5 秒。

不要冒险让 Pentosin® 动力转向液泄漏到您的发动机舱或保险杠中。经过精心设计和制造，可永久修复过于复杂且麻烦的工厂液压机构。自 2015 年以来，我们的 eRam Kit™ 是维护全功能机翼的最佳永久经济解决方案！

经销商要花上 1000 英镑来更换一个有问题的液压装置。其他经销商则提供重建服务，只需拆卸并修理同一个易发生故障的装置，通常使用溶剂来膨胀内部 O 形圈。另一家经销商提供闪亮的售后零件，用于内部液压装置，该零件由不锈钢而非黄铜制成。他们甚至没有试图称其为永久性解决方案，声称当装置再次发生故障时，更换廉价的内部 O 形圈以重新填充和排空装置“很容易”……谁愿意经历这种事情，更不用说不止一次了？高温发动机舱环境会毁坏许多易发生故障的液压部件之一，这只是时间问题！
eRam Kit™ 机翼升降舵由两个预装的独立电动升降舵组成，只需用螺栓固定在发动机盖上，无需任何改装。eRam Kit™ 包括一个小型电子“MicroModule Device™”，可连接到工厂接线并防止可怕的扰流板警告。几乎即插即用！工作原理与工厂机制完全相同。

获得专利的 eRam Kit™ 配备两个独立的电动 eRam、所有配件、紧固件、电气连接以及可防止扰流板警告的微型 MicroModule Device™。无需切割、钻孔或改装汽车的任何部件。安装简单 - 所需技能与更换刹车片相同。任何具有机械技能的人都只需大约 2 小时即可安装 eRam Kit™。大多数客户使用我们的图解说明指南和视频（随购买附送）自行安装 eRam Kit™。维护简单 - 无需特殊工具。修改简单 - 例如更换不同长度的撞锤或添加防尘防潮罩。

適用於:
保时捷 996 Turbo 2001-2005

单击“放大”可查看大部件图。
图表参考编号 2（左）和 3（右）

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

EK6-2-SS

您正在查看的产品与这些编号存在交叉引用关系

3" eRam Kit™ electric wing system for 996 Turbo
The fast version that creates good downforce, wing looks great when up. Closest factory height version for Coupe or Cabriolet.

Do not risk Pentosin® Power Steering fluid leaks into your engine bay or down the bumper. Extensively designed and engineered to permanently fix the overly complex and troublesome factory hydraulic mechanism. Since 2015, our eRam Kit™ is the best permanent economical solution to maintain a fully functional wing!

The dealer wants up to £1000's to replace a troublesome hydraulic mechanism. Others offer a rebuild service, simply tearing down and repairing the same failure prone mechanism, often using solvents to swell internal o-rings. Another offers shiny aftermarket parts for the internal hydraulic mechanism made from stainless instead of brass. They do not even attempt to call it a permanent solution, claiming it is "easy" to change out cheap internal o-rings to refill and bleed the mechanism when it fails again… Who wants to go through that EVER let alone more than once? It is only a matter of time until hot engine bay conditions destroy one of many hydraulic components that are failure prone!
The eRam Kit™ wing elevator consists of two pre-assembled self-contained electric Rams that simply bolt onto the engine lid with absolutely NO modifications. The eRam Kit™ includes a small electronic "MicroModule Device™" that connects to the factory wiring and prevents the dreaded SPOILER WARNING. Nearly plug and play! WORKS EXACTLY LIKE THE FACTORY MECHANISM.

The patented eRam Kit™ comes with two self-contained electric eRams, all fittings, fasteners, electrical connections, and the tiny MicroModule Device™ which prevents the spoiler warning. No cutting, drilling or modification to any part of the car. Easy install – about the same skill level as changing brake pads. Installation of the eRam Kit™ takes about 2 hours for anyone with any mechanical skill. Most customers install the eRam Kit™ themselves using our illustrated instruction guide and video (sent with purchase). Easily maintained – no special tools needed. Easily modified – for example to exchange for different length rams or to add Dust & Moisture Boots.

Fits:
Porsche 996 Turbo 2001-2005

Click 'Zoom in' for large parts diagram.
Diagram ref no 2 (LEFT) & 3 (RIGHT)

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

EK6-3-S

您正在查看的产品与这些编号存在交叉引用关系

适用于 996 Turbo 的 4.75 英寸 eRam Kit™ 电动翼系统
最高的电动翼升力套件™ - 与 GT3 和 GT4 机翼高度相似，提供终极下压力。

不要冒险让 Pentosin® 动力转向液泄漏到您的发动机舱或保险杠中。经过精心设计和制造，可永久修复过于复杂且麻烦的工厂液压机构。自 2015 年以来，我们的 eRam Kit™ 是维护全功能机翼的最佳永久经济解决方案！

经销商要花上 1000 英镑来更换一个有问题的液压装置。其他经销商则提供重建服务，只需拆卸并修理同一个易发生故障的装置，通常使用溶剂来膨胀内部 O 形圈。另一家经销商提供闪亮的售后零件，用于内部液压装置，该零件由不锈钢而非黄铜制成。他们甚至没有试图称其为永久性解决方案，声称当装置再次发生故障时，更换廉价的内部 O 形圈以重新填充和排空装置“很容易”……谁愿意经历这种事情，更不用说不止一次了？高温发动机舱环境会毁坏许多易发生故障的液压部件之一，这只是时间问题！
eRam Kit™ 机翼升降舵由两个预装的独立电动升降舵组成，只需用螺栓固定在发动机盖上，无需任何改装。eRam Kit™ 包括一个小型电子“MicroModule Device™”，可连接到工厂接线并防止可怕的扰流板警告。几乎即插即用！工作原理与工厂机制完全相同。

获得专利的 eRam Kit™ 配备两个独立的电动 eRam、所有配件、紧固件、电气连接以及可防止扰流板警告的微型 MicroModule Device™。无需切割、钻孔或改装汽车的任何部件。安装简单 - 所需技能与更换刹车片相同。任何具有机械技能的人都只需大约 2 小时即可安装 eRam Kit™。大多数客户使用我们的图解说明指南和视频（随购买附送）自行安装 eRam Kit™。维护简单 - 无需特殊工具。修改简单 - 例如更换不同长度的撞锤或添加防尘防潮罩。

適用於:
保时捷 996 Turbo 2001-2005

单击“放大”可查看大部件图。
图表参考编号 2（左）和 3（右）

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

EK6-475-S

您正在查看的产品与这些编号存在交叉引用关系

后扰流板液压管路。

#保时捷#

适合：
保时捷 996 Turbo 2001-2005

单击“放大”查看大零件图。
图参考号 7

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99651291601

您正在查看的产品与这些编号存在交叉引用关系

Rear spoiler hydraulic ram. 



*when ordering new hydraulic rams you should also order one set of Code: 99651291600 Rear Spoiler Hydraulic Lines.

Fits:
Porsche 996 Turbo 2001-2005

Click 'Zoom in' for large parts diagram.
Diagram ref no 2 (LEFT) or 3 (RIGHT)

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99651295

您正在查看的产品与这些编号存在交叉引用关系

Rear spoiler hydraulic ram. 



Fits:
Porsche 997 Turbo 2007-09 COUPE
Porsche 997 Turbo 2010-13 COUPE

Click 'Zoom in' for large parts diagram.
Diagram ref no 2 (LEFT) or 3 (RIGHT)

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99751295

您正在查看的产品与这些编号存在交叉引用关系

Rear Spoiler Switch for RHD Cars



Fits:
Porsche 996 TURBO 2002>> RHD Cars

Click 'Zoom in' for large parts diagram.
Diagram ref no 20

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99661315610A05

您正在查看的产品与这些编号存在交叉引用关系

Tip switch for rear lid, Matt Black.



Fits:
Porsche 986 Boxster / Boxster S 2001-2004
Porsche 996 C2 / C4 2001-05
Porsche 996 Turbo / GT2 2001-05
Porsche 996 GT3 2001-05

Click 'Zoom in' for large parts diagram.
Diagram ref no 29

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99661310610A05

您正在查看的产品与这些编号存在交叉引用关系

Tip switch for unlocking boot, Matt Black.



Fits:
Porsche 996 C2 / C4 2002-05 Targa
Porsche 996 Turbo / GT2 2002-05 Targa
Porsche 996 GT3 2002-05 Targa

Click 'Zoom in' for large parts diagram.
Diagram ref no 29

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99661310710A05

您正在查看的产品与这些编号存在交叉引用关系