发动机罩/锁及锁扣

4" eRam Kit™ electric wing system for 996 Turbo
Fast version that creates very good downforce, wing looks great when up.

Do not risk Pentosin® Power Steering fluid leaks into your engine bay or down the bumper. Extensively designed and engineered to permanently fix the overly complex and troublesome factory hydraulic mechanism. Since 2015, our eRam Kit™ is the best permanent economical solution to maintain a fully functional wing!

The dealer wants up to £1000's to replace a troublesome hydraulic mechanism. Others offer a rebuild service, simply tearing down and repairing the same failure prone mechanism, often using solvents to swell internal o-rings. Another offers shiny aftermarket parts for the internal hydraulic mechanism made from stainless instead of brass. They do not even attempt to call it a permanent solution, claiming it is "easy" to change out cheap internal o-rings to refill and bleed the mechanism when it fails again… Who wants to go through that EVER let alone more than once? It is only a matter of time until hot engine bay conditions destroy one of many hydraulic components that are failure prone!
The eRam Kit™ wing elevator consists of two pre-assembled self-contained electric Rams that simply bolt onto the engine lid with absolutely NO modifications. The eRam Kit™ includes a small electronic "MicroModule Device™" that connects to the factory wiring and prevents the dreaded SPOILER WARNING. Nearly plug and play! WORKS EXACTLY LIKE THE FACTORY MECHANISM.

The patented eRam Kit™ comes with two self-contained electric eRams, all fittings, fasteners, electrical connections, and the tiny MicroModule Device™ which prevents the spoiler warning. No cutting, drilling or modification to any part of the car. Easy install – about the same skill level as changing brake pads. Installation of the eRam Kit™ takes about 2 hours for anyone with any mechanical skill. Most customers install the eRam Kit™ themselves using our illustrated instruction guide and video (sent with purchase). Easily maintained – no special tools needed. Easily modified – for example to exchange for different length rams or to add Dust & Moisture Boots.

Fits:
Porsche 996 Turbo 2001-2005

Click 'Zoom in' for large parts diagram.
Diagram ref no 2 (LEFT) & 3 (RIGHT)

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

EK6-4-S

您正在查看的产品与这些编号存在交叉引用关系

进气口。

#莫沙默#

适合：
保时捷 996 Turbo 2001-05

请注意，此商品不是库存产品。这是特殊订单部件，一旦向我们订购，除非证明不适合用途或有缺陷，否则不得取消或退货。

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

P996.10.3000

您正在查看的产品与这些编号存在交叉引用关系

发动机罩和行李箱开启开关面板 -右侧驾驶 (RHD)
适合轿跑车和敞篷车



适合：
保时捷 986 Boxster - 2001 年至 2004 年（右侧驾驶）
保时捷 996 C2 / C4 / C4S - 2001 年至 2005 年（右侧驾驶）
保时捷 996 Turbo - 2002 年至 2005 年（右侧驾驶）

单击“放大”查看大零件图。
图参考号 9

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99655111904A03

您正在查看的产品与这些编号存在交叉引用关系

Switch Panel for memory seats. Black.



RHD and LHD Cars.

Fits:
Porsche 986 Boxster 2002 onwards
Porsche 996 C2 / C4 / C4S 2002 onwards (Coupe / Cabrio)
Porsche 996 Turbo 2002 onwards (Coupe / Cabrio)

For cars with option codes
M537 - Seating position control for comfort seat, left

M538 - Seating position control for comfort seat, right

Click 'Zoom in' for large parts diagram.
Diagram ref no 9

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99655111905A03

您正在查看的产品与这些编号存在交叉引用关系

开关面板。黑色。

适用于右舵车

适合:
保时捷 986 Boxster 2002>>
保时捷 996 C2 / C4 / C4S 2002>> (轿跑车 / 敞篷车)
保时捷 996 Turbo / GT2 2002>>
保时捷 996 GT3 MKI 2002>>

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99655101929A03

您正在查看的产品与这些编号存在交叉引用关系

DUST & MOISTURE BOOTS
Rubber boot set to protect your eRam Kit™ investment.

Fits:
Porsche 996 Turbo 2001-2005
Porsche 997 Turbo 2007-2009
Porsche 997 Turbo 2009-2013

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

EK-BOOTS

您正在查看的产品与这些编号存在交叉引用关系

塑料内盖 - 安装在行李箱盖、发动机盖或后盖的底面上。

适合:
保时捷996 Turbo 2001-05

图表参考 20。

注意：此盖子不适用于 GT2 型号。

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99651254300

您正在查看的产品与这些编号存在交叉引用关系

发动机罩和行李箱开启开关面板的导销。

已售出 - 每辆车需要 2 个



适合：
保时捷 986 Boxster - 2001 年至 2004 年
保时捷 987 Boxster - 2005 年至 2012 年
保时捷 987 Cayman - 2006 年至 2012 年
保时捷 996 C2 / C4 / C4S - 1998 年至 2005 年
保时捷 996 Turbo - 2001 年至 2005 年
保时捷 996 GT3 - 1999 年至 2005 年
保时捷 997 - 2005 年至 2012 年
保时捷 997 Turbo - 2007 年至 2012 年
保时捷 997 GT3 - 2007 年至 2011 年

单击“放大”查看大零件图。
图表参考号 4

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99655187300

您正在查看的产品与这些编号存在交叉引用关系

防止剧透警告 MicroModule 设备

固定翼或扰流板警告问题？MicroModule Device™ 是 996 Turbo 车主的绝佳解决方案，他们拥有固定翼或收到可怕的扰流板警告。适用于带有集成行李箱盖和机翼（如空气动力学套件机翼或其他售后机翼）的 Turbo。MicroModule Device™ 可轻松连接到工厂接线，并防止出现所有扰流板警告。比新的 GT2 或 GT3 盖线束便宜。全套图解分步说明随订单通过电子邮件发送。

注意：每个 Rennkit eRam Kit 均包含此内容。

適用於:
保时捷 996 Turbo 2001-2005




相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

Micro-M

您正在查看的产品与这些编号存在交叉引用关系

Rear Boot Lock Upper Part.


Fits:
Porsche 993 Carrera 1994-98 (Rear Lid)
Porsche 993 TURBO 1994-98 (Rear Spoiler)
Porsche 996 Carrera 1998-05
Porsche 996 TURBO 2001-05
Porsche 996 GT3 1999-05

Click 'Zoom in' for large parts diagram.
Diagram ref no 6

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99651221301

您正在查看的产品与这些编号存在交叉引用关系

Rear engine lid reinforcement bracket.


Fits:
Porsche 996 Turbo 2001-05

Click 'Zoom in' for large parts diagram.
Diagram ref no 23

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99651261500

您正在查看的产品与这些编号存在交叉引用关系

Rear Lid Stop Buffer.



Fits:
Porsche 996 Turbo 2001-05
Porsche 997 2005-08 Cars with Aerokit Cup
Porsche 997 Special model '911 Sport Classic' 2009-11
Porsche 997 Turbo / GT2 2007>>
Porsche 996 GT3 1999-05
Porsche 997 GT3 / GT3 RS 2007-11
Porsche 991 GT3 2014>>

Click 'Zoom in' for large parts diagram.
Diagram ref no 2

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99651298700

您正在查看的产品与这些编号存在交叉引用关系

后扰流板/盖执行器。

#保时捷#

適用於:
保时捷 996 1999-2005
保时捷 996 Turbo 2001-2005

单击“放大”可查看大部件图。
图表参考编号 8

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99651205500

您正在查看的产品与这些编号存在交叉引用关系

Rear Spoiler Air Intake Duct


Fits:
Porsche 996 Turbo 2001-2005
Porsche 996 GT2 2001-2005

Click 'Zoom in' for large parts diagram.
Diagram ref no 24

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99611014171

您正在查看的产品与这些编号存在交叉引用关系

适用于 996 Turbo 的 2 英寸 eRam Kit™ 电动翼系统
上升/下降速度为 5 秒。

不要冒险让 Pentosin® 动力转向液泄漏到您的发动机舱或保险杠中。经过精心设计和制造，可永久修复过于复杂且麻烦的工厂液压机构。自 2015 年以来，我们的 eRam Kit™ 是维护全功能机翼的最佳永久经济解决方案！

经销商要花上 1000 英镑来更换一个有问题的液压装置。其他经销商则提供重建服务，只需拆卸并修理同一个易发生故障的装置，通常使用溶剂来膨胀内部 O 形圈。另一家经销商提供闪亮的售后零件，用于内部液压装置，该零件由不锈钢而非黄铜制成。他们甚至没有试图称其为永久性解决方案，声称当装置再次发生故障时，更换廉价的内部 O 形圈以重新填充和排空装置“很容易”……谁愿意经历这种事情，更不用说不止一次了？高温发动机舱环境会毁坏许多易发生故障的液压部件之一，这只是时间问题！
eRam Kit™ 机翼升降舵由两个预装的独立电动升降舵组成，只需用螺栓固定在发动机盖上，无需任何改装。eRam Kit™ 包括一个小型电子“MicroModule Device™”，可连接到工厂接线并防止可怕的扰流板警告。几乎即插即用！工作原理与工厂机制完全相同。

获得专利的 eRam Kit™ 配备两个独立的电动 eRam、所有配件、紧固件、电气连接以及可防止扰流板警告的微型 MicroModule Device™。无需切割、钻孔或改装汽车的任何部件。安装简单 - 所需技能与更换刹车片相同。任何具有机械技能的人都只需大约 2 小时即可安装 eRam Kit™。大多数客户使用我们的图解说明指南和视频（随购买附送）自行安装 eRam Kit™。维护简单 - 无需特殊工具。修改简单 - 例如更换不同长度的撞锤或添加防尘防潮罩。

適用於:
保时捷 996 Turbo 2001-2005

单击“放大”可查看大部件图。
图表参考编号 2（左）和 3（右）

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

EK6-2-SS

您正在查看的产品与这些编号存在交叉引用关系

3" eRam Kit™ electric wing system for 996 Turbo
The fast version that creates good downforce, wing looks great when up. Closest factory height version for Coupe or Cabriolet.

Do not risk Pentosin® Power Steering fluid leaks into your engine bay or down the bumper. Extensively designed and engineered to permanently fix the overly complex and troublesome factory hydraulic mechanism. Since 2015, our eRam Kit™ is the best permanent economical solution to maintain a fully functional wing!

The dealer wants up to £1000's to replace a troublesome hydraulic mechanism. Others offer a rebuild service, simply tearing down and repairing the same failure prone mechanism, often using solvents to swell internal o-rings. Another offers shiny aftermarket parts for the internal hydraulic mechanism made from stainless instead of brass. They do not even attempt to call it a permanent solution, claiming it is "easy" to change out cheap internal o-rings to refill and bleed the mechanism when it fails again… Who wants to go through that EVER let alone more than once? It is only a matter of time until hot engine bay conditions destroy one of many hydraulic components that are failure prone!
The eRam Kit™ wing elevator consists of two pre-assembled self-contained electric Rams that simply bolt onto the engine lid with absolutely NO modifications. The eRam Kit™ includes a small electronic "MicroModule Device™" that connects to the factory wiring and prevents the dreaded SPOILER WARNING. Nearly plug and play! WORKS EXACTLY LIKE THE FACTORY MECHANISM.

The patented eRam Kit™ comes with two self-contained electric eRams, all fittings, fasteners, electrical connections, and the tiny MicroModule Device™ which prevents the spoiler warning. No cutting, drilling or modification to any part of the car. Easy install – about the same skill level as changing brake pads. Installation of the eRam Kit™ takes about 2 hours for anyone with any mechanical skill. Most customers install the eRam Kit™ themselves using our illustrated instruction guide and video (sent with purchase). Easily maintained – no special tools needed. Easily modified – for example to exchange for different length rams or to add Dust & Moisture Boots.

Fits:
Porsche 996 Turbo 2001-2005

Click 'Zoom in' for large parts diagram.
Diagram ref no 2 (LEFT) & 3 (RIGHT)

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

EK6-3-S

您正在查看的产品与这些编号存在交叉引用关系