专业工具

适用于 Boxster / 996 / 997 Carrera 和 Cayman Gen1 1997-2009 的排气螺栓修理套件（非 GT3、GT2 或 TT 发动机）

#斯托姆斯基#

随着水冷发动机排气管螺栓断裂的报道越来越多，修复断裂螺栓的麻烦也越来越普遍。从简单的排气系统更新到发动机拆卸，各种任务都不断受到排气歧管螺栓断裂、生锈和断裂的困扰。在发动机还在车上的情况下，很少能准确地拆除断裂的螺栓，即使拆除后，这项任务也很耗时，如果不小心，可能会导致头部损坏或维修失误。STOMSKI RACING 针对这些问题的解决方案是 SR067，这套工具可让您轻松、准确、灵活地钻出断裂的螺栓 - 发动机仍在车内 - 节省时间和麻烦。CNC 铣削板可精确地定位断裂的螺栓和/或螺栓孔。使用我们独特设计的翼形螺钉，SR067 板可锁定到位（通过将翼形螺钉拧到断裂的螺栓上或使用提供的螺栓穿过 SR067 翼形螺钉）。使用附带的导向钻和钻孔导向器，可以钻出故障的螺栓，形成一个完全垂直且居中的孔，如果需要，可以使用附带的 M8x1.25 丝锥进行钻孔。

套件包括：阳极氧化铝固定装置、钻头、带延长杆的丝锥、钻夹具/导轨、翼形螺钉以及坚固的储物盒中的硬件。

现在还包括我们的 SR065D 钻孔指南。

适用于保时捷 GT3/GT2 的 GT3 凸轮正时装置 V2。

#斯托姆斯基#

无论您是想提前或延缓凸轮正时、升级凸轮，还是只是想以绝对精度设置任何 GT3/GT2 发动机上的凸轮正时，这都是完成这些任务的最精确的工具。无需满足于使用工厂工具完成的“足够接近”或“大致”设置。
STOMSKI RACING 的 GT3 凸轮正时装置为所有凸轮和设置提供绝对的准确性、无限的可调性和卓越的灵活性。
包括完整的装置，带有 ASME/ANSI 认证的刻度盘指示器和一个（12 毫米或 14 毫米）TDC 指示器，带行程计（SR092 或 SR093）。包括存储箱。

Oil pressure relief plug extractor Porsche 911 / 964 / 993 / 996 / 997



Tolerance between the pressure relief plug and its galley are very close, and the slightest bit of gunk, corrosion, or bur will cause the plug to freeze up in the oil passage. A magnet is rarely powerful enough to overcome the seized plug, and leaving it in place is never an option.
Using STOMSKI RACING's Oil Pressure Relief Plug Extractor makes the task of removing the stuck plug a breeze, and allows you to ensure clean oil passages, and a properly operating bypass system.

The collet-based tool slides easily into the open end of the seized plug and a simple turn or two of the internal socket head cap screw expands the tool, grasping the plug to ensure easy removal.

Anodized Aluminum.

拆卸工具喷油器过滤器。

#北环赛道#

适合：
保时捷 911
保时捷 996
保时捷 924S
保时捷 944
保时捷 968


描述：
使用此专用工具，可以快速、干净、有效地拆卸喷油器的过滤器。此外，该工具的头部有一个定心注射器，可以使用它将新过滤器直接压入喷嘴而不会倾斜。

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

5167

您正在查看的产品与这些编号存在交叉引用关系

Time-Sert™ thread repair kit for SR065/SR067/SR068 for Porsche 911 / Boxster / 996 / 997



For exhaust port studs on 911, Boxster, 996/997 or GT3 heads where the threads have been pulled, or to recover from an already improper repair, we have developed this Time-Sert(tm) kit so you may use our SR065, SR067, SR068 or SR069 tools to insert a Time-Sert and save an otherwise ruined head. In addition to the standard Time-Sert(tm) parts (short P drill, counter-bore, tap, insert tool, and 5 short inserts), our kit also includes a full length P drill, two drill jigs/bushings to guide the P drill and tap in our SR065, SR067, or SR068 fixtures, 5 full length inserts, and 5 studs.

Time-Sert(tm) is a registered trademark of TIME FASTENER COMPANY

Timing chain starp / support for Porsche 911

When assembling the case halves on the 911 engine STOMSKI RACING's SR222-GT3 Timing Chain Strap will prove instrumental in supporting the chain to allow easier mating of the halves. Proper length, radius bend, tension, and quality steel insure that this tool will provide reliable and consistent support for all your engine builds.

fits
• SR222-GT3 for the 996/997 GT2, GT3, and TT engines.

Vario cam sprocket tool for Porsche 996 / 997 GT3/TT/GT2



STOMSKI RACING's version of this tool works on Vario intake cams on the GT2, TT, and GT3 engines. This tool replaces the factory tool P9653. Additional refinements to this tool ensure that while torquing the 16mm hex cam sprocket bolts, your tool is securely bushed and supported in the center of the tool, and thus will not slip off or round off the bolts. Black oxide finished hardened steel.