添加剂及增强剂

325毫升
适用于现代高压柴油机的全新改进化学工艺
BG 245 是 BG Products 公司 BG 244 的姊妹产品,是一款新型优质柴油燃油系统清洁剂。BG 系列被专业人士誉为同类产品中最佳的燃油系统清洁剂。
如今的柴油机能够以前所未有的低油耗输出更大的动力。高压共轨喷射 (HPCR) 系统中的喷油嘴设计能够产生比机械燃油喷射高出两倍的喷射压力。然而,柴油却并非如此,众所周知,柴油的燃油稳定性极差,因此对 HPCR 系统构成威胁。即使喷油嘴中存在极少量的沉积物,也会导致燃油滤清器卡滞,积碳会沉积在滤清器上,直至堵塞。
全新 BG 245 高级柴油燃油系统清洁剂可去除并溶解整个柴油喷射系统中的沉积物,包括燃油喷射器内部和燃烧室内的沉积物。此外,BG 245 还含有燃油润滑剂,可保护部件免受磨损,并添加十六烷值改进剂,有助于冷启动。
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
BG245
您正在查看的产品与这些编号存在交叉引用关系

325毫升
BG DOC 柴油调节剂专为调节现代高输出柴油发动机的油而设计。
现代柴油发动机在高温高压下运行。这对柴油发动机油及其添加剂提出了很高的要求。液压启动的燃油喷射器会增加油压,排放装置会增加油中烟灰的积聚。这些系统考验着发动机油的极限。在适当的条件下,高温会导致燃油中的硫与夹带的水分结合生成硫酸。这种酸会严重破坏发动机,造成腐蚀磨损和发动机部件的严重损坏。
BG DOC 柴油调节剂可保持柴油发动机的动力和性能,中和酸和酸腐蚀,减少发动机部件的摩擦和磨损,稳定粘度,通过增加氧化和烟灰控制防止油泥。
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
BG112
您正在查看的产品与这些编号存在交叉引用关系

325毫升
革命性的配方,融合了久经考验的“环清洁”技术。BG 109 发动机性能修复剂是一款快速有效的混合清洁剂,能够软化、乳化并溶解堵塞环且难以清除的燃油胶,通常只需 15 分钟或更短即可完成。
现代发动机在高温下运行。由于换油周期延长,发动机冷却性能下降,汽车发动机油承受着巨大的压力。持续的热分解和氧化分解会导致油液变稠、保温并形成沉积物。大量的沉积物会阻碍活塞环的正常运转,从而降低燃油经济性、降低功率输出,并增加有害废气排放和油耗。清除这些沉积物可以提高压缩比。
可安全用于汽油、柴油和转子发动机。
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
BG109
您正在查看的产品与这些编号存在交叉引用关系

177毫升
• 降低变速箱内的温度,
• 减少磨损,
• 降低限滑差速器噪音,
• 改善手动变速器特性,
• 降低维护成本,
• 改善水分离,
• 延长油寿命
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
BG325
您正在查看的产品与这些编号存在交叉引用关系

325毫升
BG MOA 高级配方发动机油护理剂旨在增强发动机油的功效并延长其使用寿命。产品中独特的添加剂配方可在高负荷条件下保持发动机清洁度和性能。
现代汽车在城市循环中的运行工况(暖机、启停、短途行驶、延长换油间隔)以及较高的运行温度会导致机油中所需添加剂的快速消耗。这会导致更多未燃烧的燃油和其他燃烧产物在机油中积聚,从而加速机油的氧化。氧化会导致机油变稠,并在曲轴箱、机油滤清器、油道和其他重要的发动机内部表面形成沉积物。
BG Advanced Formula MOA® 发动机油调理剂旨在最大限度地提高合成和矿物发动机油的性能并延长发动机油的使用寿命。
该产品即使在高负荷条件下也能防止发动机油的氧化和粘度增加。
保持压缩环、挺杆、张紧器和其他发动机部件清洁,以延长发动机寿命并降低维护成本。
非常适合汽油发动机使用。
与合成和矿物机油兼容。
好处:
增加油膜强度
防止氧化和油稠化
防止在城市循环中行驶时形成污泥和清漆沉积物
防止生锈和腐蚀
提供更高的功率和性能
减少大气中的有害排放
对发动机部件提供出色的长期磨损保护!
使用者:
恢复汽油发动机油系统元件的弹性
恢复柴油发动机油系统元件的弹性
发动机油保护
使用方式:
为了持续保护发动机,每次换油时添加一罐(325 毫升)4-5 升发动机油
如果油位下降,则添加到曲轴箱中,以增强其在更换之间的性能
不要让曲轴箱过满
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
BG115
您正在查看的产品与这些编号存在交叉引用关系
燃料添加剂(性能添加剂)
250毫升
描述
高规格柴油处理,可提高燃烧效率和发动机清洁度。
应用
适用于所有柴油车辆,包括符合欧 IV/V 标准的现代发动机。加油前将所有内容物倒入油箱以确保充分混合。一瓶可处理 60 升燃油。
用户利益
• 适用于所有柴油发动机,特别是符合欧IV排放标准的车辆。
• 增强型清洁套装,可更快地进行清理并延长喷油器的清洁时间。
• 将柴油的十六烷值提高多达 5 个数字,这也为车辆性能带来了切实的改善。
• 改善燃烧和发动机清洁度,大幅减少碳氢化合物 (HC) 和二氧化碳的排放。
典型特征:
- 比重(15°C 时)- 0.84
- 运动粘度(40°C,cSt)- 2.5
- 闪点 - 75°C
- 颜色外观气味 - 淡棕色

燃料添加剂(性能添加剂)
250毫升
描述
辛烷值助推器和清洁剂套装,可将无铅燃料的辛烷值提高 3 个。
应用
适用于所有汽油发动机车辆。将瓶中的液体加入 60 升汽油中。
用户利益
• 燃料辛烷值最多可提高 3 个数字。提高动力和燃油效率。提高汽油喷射器的效率和清洁度
• 化油器内部组件和喷嘴更加清洁。进气歧管和阀门清洁度得到改善。减少燃烧室沉积物
• 有助于控制燃油系统的腐蚀。保持催化剂效率并有助于激活催化转化器。改善燃烧和发动机清洁度,大幅减少碳氢化合物 (HC)、二氧化碳 (CO2) 和一氧化二氮 (NOx) 的排放
• 非常适合用作 MOT 测试前的清理处理
典型特征:
- 比重(15°C 时)- 0.84
- 运动粘度(40°C,cSt)- 2.5
- 闪点 - 6.6°C
- 颜色外观气味 - 淡棕色

燃料添加剂(性能添加剂)
500毫升
描述
辛烷值助推器和清洁剂套装,可将无铅燃料的辛烷值提高 2 个。
应用
适用于所有汽油发动机。按 1 份对 1000 份(1ml/l)的比例添加到燃料中。
用户利益
• 燃料辛烷值提高 2 个数字。提高汽油喷射器和化油器喷嘴的效率和清洁度
• 高效清洁剂套装,用于清洁和维护发动机和燃油系统内的“全新状态”。减少燃烧室沉积物并改善进气歧管和阀门的清洁度
• 减少碳氢化合物 (HC) 和二氧化碳的排放。保持催化剂效率并可能激活催化转化器
• 测试表明,性能更出色、发动机运行更平稳、燃油消耗得到改善
典型特征:
- 比重(15°C 时)- 0.943
- 运动粘度(40°C,cSt)- 16.6
- 闪点 - 66°C
- 颜色外观气味 - 淡黄色/橙色


MOTUL 发动机冲洗液适用于所有类型的汽油和柴油发动机,无论是自然吸气式还是涡轮增压式,并且与后处理系统兼容,无论燃料类型如何。
它能有效清除发动机中的沉积物和堵塞物,并在换油过程中将排出的微粒冲洗掉。
在清洁过程中,它提供最佳润滑,有助于防止发动机磨损、减少燃料消耗和降低排放。
便于使用:
每次换油前,只需将其添加到温热的发动机油中,让发动机怠速约 15 分钟,然后排出机油并更换机油和机油滤清器。


有效清除燃油系统中的污垢和堵塞物
- 性能恢复:恢复发动机的原始功率和性能。
- 效率:减少燃料消耗并降低废气排放。
- 通用兼容性:适用于所有类型的汽油发动机。
描述:
MOTUL 燃油喷射器清洁剂汽油是一种强效的固化添加剂,适用于所有类型的汽油发动机,无论是配备喷射系统还是化油器,自然吸气还是涡轮增压,带或不带催化转化器。它与所有汽油燃料兼容,包括含铅、无铅、液化石油气、乙醇和生物燃料,并与 E10 燃料(10% 乙醇)无缝配合。
这种添加剂可有效清除整个燃油系统中的污垢和堵塞物,解决喷油器喷嘴污垢、冷凝、喷油器或化油器粘胶以及燃烧室和进气阀沉积物等问题。
MOTUL 燃油喷射器清洁剂汽油还可确保清洁过程中的出色润滑,防止去除的微粒重新沉积。

RON 最多可提高 2 个点,增强发动机的抗爆震性和燃烧稳定性
- 提升性能:提高发动机功率并增强驾驶乐趣。
- 增强启动和加速性能:提供更平稳、更灵敏的驾驶体验。
- 适合低质量燃料和冬季条件:特别推荐在燃料质量较低和寒冷季节使用。
描述:
MOTUL 辛烷值增强剂汽油是一种辛烷指数增强剂,适用于所有类型的汽油发动机,包括间接或直接喷射、化油器、涡轮增压或自然吸气,带或不带催化转换器。它与所有汽油燃料兼容,包括含铅、无铅、液化石油气、乙醇和生物燃料。通过将辛烷值 (RON - 研究辛烷值) 提高最多 2 个点,
MOTUL 辛烷值增强剂汽油可改善燃烧、提高性能并防止发动机爆震和异常燃烧事件。

The first step for a rejuvenating pit stop? Filling up the tank again. This is important to protect your fuel tank and fuel system against corrosion – especially if you are adding the fuel additive, developed for all Porsche Classic vehicles, to the fuel tank.
If the vehicle is left stationary for long periods of time, the fuel additive can offer a number of advantages: It provides special corrosion protection for all metallic components in the fuel system that come into contact with the fuel. In addition, it ensures that deposits are not able to cause damage to the fuel tank and fuel system. That means your Porsche will keep performing as well as it ever has. In order to achieve these optimum results, nothing was left to chance during development, with intensive testing taking place throughout the process. In order to achieve these optimum results, nothing was left to chance during development. The intensive test programme included various compatibility tests - especially with regard to installed Porsche Classic Genuine Parts - as well as tests for corrosion protection and resinification.
Further advantages for you: mixing the additive with the fuel is straightforward and quick. The good creep characteristics ensure that there is a protective layer between the fuel and the metal. With a newly developed formulation, you are not only protecting the filled part of the fuel tank – even in the empty space, the additive forms a sealed protective layer through adsorption. A better preventative measure is hard to find.
In short: when you are this well-prepared, the winter brings no fears.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
00004420602
您正在查看的产品与这些编号存在交叉引用关系
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 996 GT3 RS 2003-04
- Porsche Carrera GT
- Porsche 924 2.0L 1976-79
- Porsche 924 2.0L 1980-85
- Porsche 924 Turbo 2.0L 1979-81
- Porsche 924 Turbo 2.0L 1982-84
- Porsche 924 Carrera GT 2.0L 1981
- Porsche 924 Carrera GTS 2.0L 1982
- Porsche 924S 2.5L 1986-87
- Porsche 924S 2.5L 1988
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988>>
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
- Porsche 928 4.5L 1978-82
- Porsche 928S 4.7L 1981-83
- Porsche 928S2 4.7L 1984-86
- Porsche 928S4 5.0L 1987-92
- Porsche 928GT 5.0L 1989-91
- Porsche 928GTS 5.4L 1992-95
- Porsche 356 1950-55
- Porsche 356A 1955-59
- Porsche 356B 1959-63
- Porsche 356C 1963-65
- Porsche 914 (1970-1976)

Uses combustion enhancer CE+ which helps the fuel to burn more completely reducing CO2 emissions and diesel noise. It helps the engine to run more smoothly, increasing acceleration and reducing black smoke.
Benefits & Features:
• Cleans injectors and restores spray pattern
• Improves the ignition quality and combustion of diesel fuel
• Facilitates cold starting
• Reduces diesel knocking noises and soot particulates
• Cleaner fuel reduces black exhaust smoke
• Cleans and protects the entire fuel system against rust and corrosion
• Prevents fouling of the fuel filter
• Recommended for all diesel engines with or without a turbo charger
• Lubricates pumps and injectors and compensates for the reduced lubrication of low sulphur diesel
Directions of use:
Pour contents of bottle into fuel tank then fill tank with fuel. For best results use at each tank fill or monthly intervals. This product will not harm engine fuel if overdosed.

An iron based organometallic additive for all diesels fitted with a Diesel Particulate Filter. It aids filter regeneration by lowering the combustion temperature of soot deposits. This extends filter life, lowers soot emissions and improves performance.
Benefits & Features:
• Clears and regenerates blocked soot filters without dismantling
• Complete burn-off of soot particles during driving
• Avoids frequent maintenance costs related to the manual regeneration of the blocked soot filter
• Especially suited for city driving cycles
• Can be used in combination with built-in regeneration systems
• Ultra-fast result
Directions of use:
Pour contents of bottle into fuel tank then fill tank with fuel as normal. For best results use at every vehicle service.

Is a specially formulated oil additive for petrol and diesel engines. It lubricates the valves as well as helping to remove deposits that cause noise and effect engine efficiency.
Benefits & Features:
• Suitable for petrol and diesel engines
• Restores efficient working of hydraulic valve lifters
• Lubricates and releases sticking valves
• Reduces valve train noise
• Restores lost power
• Is safe for use with catalytic converters and turbochargers
• 100% oil soluble - contains no solid particles
• Compatible with mineral and synthetic engine oils
Directions of use:
Pour contents of bottle into the engine oil when engine is warm. For best results use at every vehicle service.