前履带控制臂

前控制臂衬套组，单球形。（不含控制臂）
全套左右套件



适合:
保时捷 964 1989-94 年款
保时捷 993 1995-98 年款

高密度前控制臂衬套可消除原厂部件老化造成的振动，并在急加速和急刹车时更好地保持转向手感。这些衬套取代了993和964前控制臂中的前后衬套。我们的衬套采用特氟龙内衬球形轴承和防风雨密封条，可减少负载下的悬架挠度，带来更干脆利落、更直接的转向手感。无论是街道赛车还是赛道赛车，都能享受到更稳定、更精准的前端操控。

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

96434101707

您正在查看的产品与这些编号存在交叉引用关系

前控制臂前衬套。
价格为每个单位。每辆车需要 2 个。

#大象赛跑#

適用於:
保时捷 964 1989-94 OEM 硬度
保时捷 993 1995-98 OEM 硬度


我们发现 964 车上的控制衬套经常出现故障。故障似乎与行驶里程无关，橡胶会因老化而劣化。症状是方向盘会感到振动。

原始硬度– 恢复原来的性能和乘坐质量。

运动硬度– 与 993 RS 衬套类似，运动硬度橡胶的硬度大约高 25%。转弯负载下变形更小，因此保持更精确的对准。

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

2290007

您正在查看的产品与这些编号存在交叉引用关系

前控制臂前衬套。
价格为每件。每辆车需要 2 件。

适合:
保时捷 964 1989-94运动硬度
保时捷 993 1995-98运动硬度


我们发现964车型的控制衬套经常发生故障。故障似乎与行驶里程无关，橡胶会因老化而老化。故障症状是方向盘会振动。

库存硬度– 恢复原有的性能和乘坐质量。

运动硬度——与 993 RS 衬套类似，运动硬度橡胶的硬度大约高出 25%。在转弯载荷下变形更小，从而更精准地保持对准。

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

96434101707

您正在查看的产品与这些编号存在交叉引用关系

Front control arm rear rubber bushing.
Price is EACH. 2 req'd per car.



Fits:
Porsche 964 1989-94 Rear Bushing Sport Hardness
Porsche 993 1995-98 Rear Bushing Sport Hardness
Porsche 944 1985-95 W/ Alum. Arms Front Bushing Sport Hardness

The control arm bushing is comprised of two halves for each arm. Kit includes two halves for one complete bushing.

Stock-hardness – Restores performance and ride quality to original.

Sport-Hardness – Sport hardness rubber is about 25% firmer than stock. It deflects less under cornering loads and thereby maintains alignment more precisely.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

2290011

您正在查看的产品与这些编号存在交叉引用关系

Front control arm rear rubber bushing.
Price is EACH. 2 req'd per car.



Fits:
Porsche 964 1989-94 Rear Bushing Stock Hardness
Porsche 993 1995-98 Rear Bushing Stock Hardness
Porsche 944 1985-95 944 W/ Alum. Arms Front Bushing Stock Hardness

The control arm bushing is comprised of two halves for each arm. Kit includes two halves for one complete bushing.

Stock-hardness – Restores performance and ride quality to original.

Sport-Hardness – Sport hardness rubber is about 25% firmer than stock. It deflects less under cornering loads and thereby maintains alignment more precisely.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

2290010

您正在查看的产品与这些编号存在交叉引用关系

前控制臂/叉臂，配有衬套组，单球衬套。（左右各 2 套）
全套下臂，带衬套，左、右套件

#罗勒#

适合:
保时捷 993，所有车型

高密度前控制臂配备衬套，可消除原厂部件老化造成的振动，并在急加速和急刹车时更好地保持转向手感。这些衬套取代了993前控制臂的前衬套和后衬套。我们的部件采用特氟龙内衬球形轴承和防风雨密封条，可减少负载下的悬架挠度，带来更清脆、更直接的转向手感。无论是街道车还是赛道车主，都能享受到更稳定、更精准的前部转向。

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

3602409931

您正在查看的产品与这些编号存在交叉引用关系

Front control arms / wishbones with Heavy Duty bushing set fitted, HD Bushes. (Set of 2 Left & right) 
Full set of lower arms with bushings installed Left & Right Kit



Fits:
Porsche 993, All models 

High Density front control arms with bushings eliminate vibration often caused by aging OEM units, and better maintain steering feel under heavy acceleration and braking. These bushings replace the foreword and rear bushings in the front control arm of 993's. 

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

3602409932

您正在查看的产品与这些编号存在交叉引用关系

Front lower control arm monoballs. Complete kit.
1 kit, req'd per car.



Fits:
Porsche 964 1989-94
Porsche 993 1995-98

Complete kit for the front lower control arms. Includes weather-sealed monoball cartridge replacements for both the front and rear bushings of the front control arms. Includes four cartridges and instructions.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

2260000

您正在查看的产品与这些编号存在交叉引用关系

Bushing & monoball installation tool. 1 req'd per lifetime.



Fits:
Porsche 964 1989-94 front lower control arms, rear bushing
Porsche 993 1995-98 front lower control arms, rear bushing
Porsche 994 1976-95 front lower control arms, front bushing

This tool allows installation of lower control arm bushings without a shop press. It can be used for installation rubber bushings as well as our monoball cartridges.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

2201702

您正在查看的产品与这些编号存在交叉引用关系

Control arm bushing installation tool. 1 req'd per lifetime.



Fits:
Porsche 964/993 front bushing in the front control arms

Simplify the bushing removal and installation process. Our two piece cup and piston tool allows for easy control arm bushing insertion. The tool is designed to precisely fit the bushing circumference, preventing accidental damage to the bushing or control arm and ensuring proper installation.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

2260020

您正在查看的产品与这些编号存在交叉引用关系

Split bushing removal tool. 1 req'd per lifetime.



Fits:
Porsche 911 / 912 / 930 1965-89
Porsche 964 / 993 1989-98
Porsche 944 / 968 / 924 1976-95 w/ aluminium control arms

Easily removes the following bushings:
• 911 / 930 / 912 trailing arm bushing
• 964 / 993 front lower control arm rear bushing
• 944 front lower control arm front bushing (aluminium arms)

It used to be a difficult task

This clever tool is a real time saver that makes easy work of removing split bushings. Doing the job with the arms still on the car for 911, 964, and 993 saves time and labor.

Split bushings are actually two separate bushings, each pressed in from opposite sides of the arm. Removing them requires driving them out from the parting line where they meet, in the center of the arm. This has traditionally been a difficult job that requires removing the arm and fumbling with a punch to try and drive out the bushings from the center.

Easy & quick
This tool makes it easy to engage the parting line and drive out the bushing. It is so easy that the job can be performed without removing the arm from the 911, 964, and 993.

Pro Mechanics and DIY'ers alike will appreciate the time saving this tool provides.

Combine with bushing installation tools part #2020904 to complete the job.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

2020903

您正在查看的产品与这些编号存在交叉引用关系