运动及赛道赛车座椅

3D-printed Bucket seat centre panel.
Please note: Only available for vehicles with full-bucket seats and only for the driver's seat.



Fits:
Porsche 911 (991) R / GT3 / GT3 RS
Porsche 911 (991 II) Carrera T / Speedster / GT3 / GT3 RS / GT2 RS
Porsche 911 (992) Carrera GTS / Carrera 4 GTS
Porsche 911 (992) Turbo / Turbo S
Porsche 911 (992) GT3 / GT3 with Touring-Package
Porsche 718 (981) Boxster Spyder
Porsche 718 Boxster (982) GTS / GTS 4.0 / T
Porsche 718 Cayman (982) GTS / GTS 4.0 / T / GT4 / GT4 4.0
Porsche 718 Spyder

The 3D printed bodyform full-bucket seat combines maximum functionality with individual design. The seat cushion and the seat backrest of the full-bucket seat already installed in the vehicle are replaced by new elements. These consist of a solid and energy-absorbing substrate material, a 3D-printed elastic grille structure and a perforated top covering made of Race-Tex. The grille structure and perforation improve both the passive air conditioning and the resilience of the seat. At the same time, depending on the selected degree of hardness, the upholstery has a weight advantage of more than 8% compared to the standard material. A deep seat position typical of motor sports and increased lateral support thanks to a thigh cushion provide an even more direct feel for the track - for an experience similar to that in motor racing.

As a visual highlight, the visible grille elements on the cushion and backrest are available separately in various colours.

The 3D printed bodyform full-bucket seat can be installed and removed again in a few simple steps. Compatible with both 3- and 6-point seat belts. Includes a practical transport bag.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

982044779

您正在查看的产品与这些编号存在交叉引用关系

BBi Autosport 碳纤维运动座椅副安全带支架 适用于保时捷 991 GT3 / 991 GT3 RS / 981 Cayman GT4



产品描述：
如果您有可选的运动桶形座椅并计划安装 6 点式赛车安全带，那么您将需要此支架。无需任何改装，此支架可直接用螺栓固定在座椅上，无论座椅位置如何，都能将安全带保持在适当的 10-20° 角度。

特征 ：

• 无论座椅位置如何，都能以适当的 10-20° 角度提供副安全带的安装位置
• 采用整块高碳钢精密 CNC 激光切割和弯曲，强度更高
• 时尚的设计，采用激光切割的 BBi 标志和耐用的缎黑色粉末涂层
• 使用工厂安装点安装到座椅组件上，包括所有硬件
•与配备运动型桶形座椅的保时捷 991 GT3 和 981 Cayman GT4 车型兼容
• 美国制造

BBi Autosport Seat Base and Slider Kit. Compatible with all Porsche 996/997/987/981/991 models PRICE IS EACH




Options:
•   14-3/4" ¬(375mm) to 17-1/2" (445mm) width adjustments (standard side mounts)
•   16"¬(407mm) to 18-3/4"(476mm) width adjustments (optional wide side mounts)

The BBi Autosport race spec seat mounts are a direct bolt into the factory mount location for a hassle free, easy installation for your competition race seat. The BBi Autosport Seat mounts have a large range of adjustment options allowing fitment for all major FIA and SFI approved seat brands and offers an integrated 5 and 6-point sub belt mounting location. The wide range of adjustment covers almost all possible seating preferences to properly seat drivers of all sizes. CAD designed, CNC laser cut and formed from one piece of .125" (1/8") carbon steel with no welds to maximize strength and stiffness. All mounts are powder coated with a wrinkle black base and satin black sides.

Features:

•   Precision CNC laser cut and bent from one piece of 1/8" 3mm carbon steel (base & side mounts)
•   Multi way adjustability
•   High strength sliders, mounts to base with 4 bolts per slider
•   Integrated 5 and 6-point sub belt mounting locations
•   Stylish design with laser cut BBi logo and durable satin black Powdercoat finish
•   No modifications to vehicle or any seat mount components are required for installation
•   Uniquely designed for Porsche vehicles for the best possible fitment
•   Mounts to factory bolt locations with precise factory fitment
•   Fits all major FIA/SFI approved seats up to 17"

Grille elements for 3D-printed Bucket seat centre panel.
3-parts

"Grille elements in Black, 9820447898YR"

"Grille elements in Guards Red, 98204478984A"

"Grille elements in Racing Yellow, 9820447891S1"

Fits:
Porsche 911 (991) R / GT3 / GT3 RS
Porsche 911 (991 II) Carrera T / Speedster / GT3 / GT3 RS / GT2 RS
Porsche 911 (992) Carrera GTS / Carrera 4 GTS
Porsche 911 (992) Turbo / Turbo S
Porsche 911 (992) GT3 / GT3 with Touring-Package
Porsche 718 (981) Boxster Spyder
Porsche 718 Boxster (982) GTS / GTS 4.0 / T
Porsche 718 Cayman (982) GTS / GTS 4.0 / T / GT4 / GT4 4.0
Porsche 718 Spyder

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

982044789

您正在查看的产品与这些编号存在交叉引用关系

Seat cover and softer foam set.
Porsche 918 fixed carbon bucket seats



If your car is equipped with the 918 fixed carbon bucket seats, changing the appearance has never been easier.

Choose from the OEM 911R onwards factory Black/Silver or Agate Grey material (not a reproduction) or our range of Pepita Houndstooth Fabric.

This set comes complete with new backrest and seat base foams (softer than the factory originals) covered in your desired material and fitting is straightforward.

Some found the factory original foams too hard so we have developed replacement foam sets slightly softer than the factory originals for a more comfortable ride, but still with all the factory details.

Please Note
When fitting sets to 2021 seats and onward make sure you disconnect the battery while working on the seats in order not to get any warning lights appearing.

Seat cover and standard foam set. Porsche 918 fixed carbon bucket seats



If your car is equipped with the 918 fixed carbon bucket seats, changing the appearance has never been easier.

Choose from the OEM 911R onwards factory Black/Silver or Agate Grey material (not a reproduction) or our range of Pepita Houndstooth Fabric.

This set comes complete with new backrest and seat base foams (as factory original) covered in your desired material and fitting is straightforward.

The foam used in these are the same density as the factory items. If you find these to hard, please see our range of softer foams.

Please Note
When fitting sets to 2021 seats and onward make sure you disconnect the battery while working on the seats in order not to get any warning lights appearing.

座椅滑块 - 左侧或右侧。

#保时捷#

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

9975214

您正在查看的产品与这些编号存在交叉引用关系

座椅滑块 - 左侧或右侧。

#保时捷#

适合：
保时捷 986 Boxster 1997-04
保时捷 987 Boxster 2005>>
保时捷 996 1998-05
保时捷 996 Turbo
保时捷 997 2005>>
保时捷 997 Turbo
保时捷卡曼

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

9975214

您正在查看的产品与这些编号存在交叉引用关系

侧垫保护罩。保时捷 918 固定桶形座椅

#复古装饰#

如果您的汽车配备了 918 固定碳纤维桶形座椅，那么进出时可能是一项体力挑战，会导致明显的磨损、皮革装饰上的深折痕和缝线撕裂。

这是采用 918 座椅垫保护装置提供的解决方案。

一旦安装在两个座椅的外侧垫子上，这款新上市的产品就能完美地复制标准垫子的外观，因为它采用保时捷工厂的黑色纳帕皮革制成，并采用您选择颜色的偏离缝线。
连同附加的“袖口盖”，这些保护装置还可以遮挡垫子的后部，不会显得格格不入，并且安装也很容易。
请注意保护器“袖口”没有偏离缝线

成对出售 - 左座椅和右座椅

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

918BOLSTERCVR

您正在查看的产品与这些编号存在交叉引用关系

副带安装轻型桶形座椅（LWB）。
单独出售 - 适合左侧或右侧座椅



适合：
保时捷 981 Cayman GT4
保时捷 718 Cayman GT4 / GT4 RS
保时捷 991.1 / 991.2 GT3 / GT3 RS
保时捷 992 GT3 / GT3 RS / GT2 RS

在保时捷中安装副带的最佳方法
对于使用五点式、六点式或七点式安全带和原厂 CFRP 全桶形座椅（也称为轻型桶形座椅）的保时捷 GT2RS、GT3/GT3RS 和 GT4 车主来说，高性能副带支架是必备之物。高性能副带支架可轻松使用现有座椅硬件进行螺栓固定，而无需将座椅从车上完全拆除，它可将您的安全带防潜带（“副带”）正确固定到座椅底座上。

CMS Performance Sub Strap Mount 适合驾驶员侧和/或乘客侧座椅。
您的保时捷中的性能安装线束子带是在美国制造的。

Performance Sub Strap Mounts 完全在美国内部设计、制造和粉末喷涂。由实心碳钢制成，重量仅为 1.4 磅 (625g)，没有比它更坚固、更实惠的解决方案了。Sub Strap Mounts 可实现座椅的前后和上下完全调节，同时保持理想的 Sub Strap 角度，以实现最大安全性。

性能子带安装座详细信息：

• 坚固的钢结构，确保最大安全性
• 可完全前后和上下调节座椅
• 标准粉末涂层缎黑色；上方下拉菜单中有多种保时捷颜色可供选择！
• 适合驾驶员或乘客座椅（仅限保时捷 LWB）
• 安装简单
• 与 OEM 安全带和安全气囊硬件兼容

Track Bucket Sports Seat - DTX RECLINE



Fit most 911's, 996, Boxster, 997, Cayman

Light weight carbon fibre bucket seats with reclining back rest and removable back and bottom pads.

This seat is available in following materials:
Leather, Alcantara, Leather (outer) & Alcantara (inner).

These sports seats are manufactured for all makes and models.
Due to the universal nature of this product some modification or
alteration maybe required to the seat or car to ensure correct fitting

To view more detailed pictures please CLICK HERE

- These seats come complete with bottom sliders and side brackets. You will need to order extra
Code: SB017DR (LEFT SEAT) and SB017PA (RIGHT SEAT) for seat fixing adaptors for 986/996/997/987/CAYMAN.

Price is per seat.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99978091

您正在查看的产品与这些编号存在交叉引用关系