请稍候… 
我们正在处理您的订单,请稍候
请不要按返回按钮… 
Design 911 Design 911 supply Porsche parts, Porsche spares and Porsche accessories, to both retail and to the trade. Our Porsche product and accessory range includes brakes, exhausts, tyres, wheels and Porsche panels and interiors. https://design91.uk/images/schemaLogo.png https://design91.uk/images/schemaLogo.png +443456003478 https://design91.uk Facebook Instagram

传动轴及零件

按车型类型筛选
按品牌过滤
显示从1到8(共8个产品)
最佳产品
893407237/1
Product Information
Product Information
传动轴螺栓。

oematch

適用於:
保时捷 914 1970-76
保时捷 924 1976-88
保时捷 944 1982-91
保时捷 968 1992-95

价格为每个螺栓。
涵盖零件编号 893407237、N91108201、

单击“放大”可查看大部件图。
图表参考编号 4

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。

893407237
893407237
113501229A
113501229C
113501229D
03004
N91108201

您正在查看的产品与这些编号存在交叉引用关系
最佳产品
477501103/2
Product Information
Product Information
适用于保时捷 924 944 手动挡汽车的传动轴
轴长401.5mm。

oematch

適用於:
保时捷 924 1976-85(非涡轮增压)手动车
保时捷 944 1982-85(非涡轮增压)手动车

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。

477501103
477501103
300673
93133202101
181501201A

您正在查看的产品与这些编号存在交叉引用关系
最好的价钱
95133203806/4
Product Information
Product Information
传动轴保时捷 924S / 944 / 944S2 / 944 Turbo 所有手动车

odm

新产品

適用於:
保时捷 944 S2 1989-91 手动挡汽车
保时捷 944 Turbo 1985-91 手动挡汽车


长度:540毫米,
外齿轮侧:100,
内径:100 毫米

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。

95133203806
95133203802
18-012600
95133203803
95133203804
95133203805
95133203806
95133203807
94433203801

您正在查看的产品与这些编号存在交叉引用关系
特殊订单商品
477501103
Product Information
Product Information
更换传动轴。
轴长 401.5mm

#保时捷#

适合:
保时捷 924 1976-85(非涡轮增压)手动挡汽车
保时捷 944 1982-85(非涡轮增压)手动车

价格为每个传动轴。

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。

477501103
477501103
300673
93133202101
181501201A

您正在查看的产品与这些编号存在交叉引用关系
最好的价钱
95133203806/4::1
Product Information
Product Information
传动轴。保时捷 924S / 944 1985 年起
适合左侧或右侧

odm

適用於:
保时捷 924S 1986-88 手动挡汽车
保时捷 944 2.5L、2.7L 1985>>(非涡轮增压)手动车

传动轴:
长度[毫米] 540毫米
外齿轮侧100
内径[毫米] 100毫米

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。

95133203806
94433203801
300676
18-213070
95133203806

您正在查看的产品与这些编号存在交叉引用关系
最好的价钱
94433203801/1
Product Information
Product Information
#交换#
翻新更换传动轴
轴长 531.5mm

gkn

適用於:
保时捷 924S 1986-88 手动挡汽车
保时捷 944 2.5L、2.7L 1985>>(非涡轮增压)手动车

请注意:旧设备必须以建造状态而不是组件形式退还给 Design911。

* 翻新传动轴以交换方式出售,将收取 40.00 英镑的附加费,并在退回旧传动轴时退还(需经供应商批准)。

该传动轴配有接头和橡胶套。
享受 12 个月保修

价格为每个传动轴。


    请注意:
  • 当我们和相关制造商收到并批准更换部件时,将退还该翻新部件的附加费。
  • 请注意,附加费退款通常需要平均 6 到 8 周的时间才能获得制造商的批准。
  • 是否接受更换部件由制造商自行决定,以部件是否适合修复为准。
  • 所有附加费和兑换均须遵守我们的条款和条件。




相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。

94433203801
94433203801
300676

您正在查看的产品与这些编号存在交叉引用关系
最好的价钱
95133203806/2
Product Information
Product Information
exchange
Reconditioned replacement driveshaft.

Please note:
Reconditioned units are sold on an exchange basis, A surcharge of £50.00 will be held and then refunded when the old one is returned.

gkn

Fits:
Porsche 944 S2 1989-91 Manual cars
Porsche 944 Turbo 1985-91 Manual cars

PLEASE NOTE: The old unit must be returned to Design911 in a built state, not in component pieces.

*Reconditioned Drive Shafts are sold on a exchange basis, A surcharge of £40.00 will be held and then refunded when the old one is returned


Price is for each Driveshaft.


    PLEASE NOTE:
  • The surcharge for this reconditioned part will be refunded when the exchange unit is received and approved by us and the relevant manufacturer.
  • Please note, surcharge refunds often take an average of 6 to 8 weeks to be approved by the manufacturer.
  • Acceptance of the exchange part is at the manufacturer's discretion, based on the part being fit for reconditioning.
  • All surcharges and exchanges are subject to our terms and conditions.




相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。

95133203806
95133203806
300684

您正在查看的产品与这些编号存在交叉引用关系
特殊订单商品
90091009302
Product Information
Product Information
后轮毂螺母。M 22 x 1,5

单独出售 - 每辆车需 2 个

適用於:

保时捷 911 3.2 Carrera 1984 至 1989
保时捷 944 1986>>
保时捷 994 S2
保时捷 924S 1986-88
保时捷 928 1978-95
保时捷 986 1992-95

图表参考编号 22



相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。

90091009302
90091009302

您正在查看的产品与这些编号存在交叉引用关系
显示从1到8(共8个产品)
关于传动轴及零件

传动轴是传递扭矩和旋转的机械部件,通常用于连接传动系统的其他部件,这些部件由于距离或需要允许它们之间有相对运动而无法直接连接。

作为扭矩载体,驱动轴会受到扭转剪切应力,相当于输入扭矩和负载之间的差值。因此,它们必须足够坚固以承受应力,同时避免过多的额外重量,因为这反过来会增加它们的惯性

您可能也喜欢
流行车型