运动及赛道赛车座椅

碳纤维 GT 桶形座椅（两套）

惊艳的轻量化替换座椅，适用于 F 型（含适配器）及更新款的 911。其设计完美，舒适可靠，并经过 FEM 测试。座椅可直接安装内饰/填充物（不包括在内）。前部采用可见碳纤维材质，可选哑光或亮光饰面，或可喷涂凝胶涂层，并包含适用于 964 或 993 型号的铝制支架。

座椅靠背采用黑色凝胶涂层，可根据您的油漆颜色进行选择（产品照片中深绿色涂漆区域）。

规格：
• 底部至末端 830 毫米
• 臀宽 500 毫米
• 不含安装件的单个座椅重量为 4800 克
• 随附的支架由 AL7075 制成

注意 -可能不符合某些国家的高速公路安全规范，专为赛道和展示用途设计。

包装附加费
碳纤维座椅可以包装用于国内运输和出口，但需收取费用，费用为带有插入物和泡沫填充物的纸板箱。

请注意：此部件需特殊订购。交货时间通常为5-6周。如无特殊需求，不可取消或退货。

Heavy Duty SEAT SIDE BRACKETS



Left side seat brackets set of 2. for one seat. Heavy duty range with seat belt fixing point.

Select Left OR Right

These sports seats brackets are manufactured for all makes and models.
Due to the universal nature of this product some modification or
alteration maybe required to the seat or car to ensure correct fitting

Note: The distance from the centre of the top hole to the bottom one (as per photo) is 28.5 cm

Rennline Harness Mount - Tunnel Side - Short

Fits:
Porsche 911
Porsche 964
Porsche 993
Porsche 996
Porsche 997
Porsche 944
Porsche 928
Porsche 914

Harness mounting brackets - These brackets have been specially designed to allow you to install both, factory seat belts and aftermarket harnesses at the same time. Intended for the use of quick disconnect lap belts on both sides of the seat. This is a perfect set up for your street/track car. All brackets are designed to attach to the factory seat belt mounting locations so no drilling is required.

Note: Product is sold individually.

Manufactured from 300 series stainless steel.
Comes with all spacers, bushings, and mounting hardware for most applications.

Rennline Harness Mount - Tunnel Side - Long

Fits:
Porsche 911
Porsche 964
Porsche 993
Porsche 996
Porsche 997
Porsche 944
Porsche 928
Porsche 914

Harness mounting brackets - These brackets have been specially designed to allow you to install both, factory seat belts and aftermarket harnesses at the same time. Intended for the use of quick disconnect lap belts on both sides of the seat. This is a perfect set up for your street/track car. All brackets are designed to attach to the factory seat belt mounting locations so no drilling is required.

Note: Product is sold individually.

Rennline Harness Mount - Tunnel Side - Short

Fits:
Porsche 911
Porsche 964
Porsche 993
Porsche 996
Porsche 997
Porsche 944
Porsche 928
Porsche 914

Harness mounting brackets - These brackets have been specially designed to allow you to install both, factory seat belts and aftermarket harnesses at the same time. Intended for the use of quick disconnect lap belts on both sides of the seat. This is a perfect set up for your street/track car. All brackets are designed to attach to the factory seat belt mounting locations so no drilling is required.

Note: Product is sold individually.

Universal seat side brackets - Standard - WITHOUT Seat belt fixing point



Side seat brackets set of 2. For one seat. standard range without seat belt fixing point.

These sports seats mounts are manufactured for all makes and models.
Due to the universal nature of this product some modification or
alteration maybe required to the seat or car to ensure correct fitting

Please visit the image gallery of the product to see all measurements of mounting points.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99652100000

您正在查看的产品与这些编号存在交叉引用关系

Seat sliders universal.



Please visit image gallery to see all bolt on points measurements.

These seat sliders are manufactured for all makes and models.
Due to the universal nature of this product some modification or
alteration maybe required to the seat or car to ensure correct fitting

Fitting points:
- 40cm between rails (from bolt hole to bolt hole)
- 25cm min - 32cm max between bolt holes on single rail

Fit:
Porsche 911 1974-89
Porsche 944 1982-91
Porsche 964 1989-94
Porsche 993 1994-98
Porsche 928 1978-95
Porsche 968 1992-95

For Boxster 986/987 and 996/997 and Cayman models you will need Part No.99652100005 for each seat.

May require some drilling or modification before fitting. Fits left or right side.

Price is each.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99652188800

您正在查看的产品与这些编号存在交叉引用关系

Track Bucket Sports Seat - DTX RECLINE



Fit most 911's, 996, Boxster, 997, Cayman

Light weight carbon fibre bucket seats with reclining back rest and removable back and bottom pads.

This seat is available in following materials:
Leather, Alcantara, Leather (outer) & Alcantara (inner).

These sports seats are manufactured for all makes and models.
Due to the universal nature of this product some modification or
alteration maybe required to the seat or car to ensure correct fitting

To view more detailed pictures please CLICK HERE

- These seats come complete with bottom sliders and side brackets. You will need to order extra
Code: SB017DR (LEFT SEAT) and SB017PA (RIGHT SEAT) for seat fixing adaptors for 986/996/997/987/CAYMAN.

Price is per seat.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99978091

您正在查看的产品与这些编号存在交叉引用关系