雾灯/行车灯

图表参考编号 16

图表参考编号 16

Are you unable to adjust the fog lights of your Porsche 944 or 928? 

Then most probably your fog light adjusting actuators have been damaged. These actuators are needed for the adjustment and if they are broken, the fog light can no longer be adjusted correctly. Fortunately we have the solution with this set and you can repair your fog light so you do not have to buy a complete new lens. 
The actuators are made of Nylon, which is reinforced with carbon fibres. This provides a higher strength than the original plastic and is comparable in strength to aluminium. We have also improved our original design to make it stronger so that the actuator is less likely to break in future. 

The actuators are suitable for the 944 turbo / S2 and for the 928 S4, GT and GTS. 

With one set you can repair one fog light. 

Please Note
Lamp lens not included

Contents: 

• 1x Fog lamp housing 
• 4x new bolts for glass mounting
• 3x new mounting bolts for mounting housing in bumper
• 1x Sealing rubber for a moisture-free lamp
  
  
  
  

Fits:
Porsche 944 S2
Porsche 944 turbo
Porsche 928 S4
Porsche 928 GTS

When disassembling the fog/driving lamp unit, the mounting bolts often break off due to rust or the lamp housing fastening points break off and the metal inserts in the original housing get stuck due to corrosion and cannot be removed. Drilling out the metal inserts is almost impossible and takes a lot of time. 

This problem has been solved with this new lamp housing, so no more trouble with rusted bolts. There are no metal inserts in this fog lamp housing that can rust and the housing is extremely strong.

The original housing is no longer available.

Note: The fog lamp housing is suitable for both the left and the right hand side.

The drain on the back can be disassembled from the old housing and mounted on the new one.