前减震器部件

Camber plate monoball cartridges for 2152200
Sold as Pair, 1 pair required per car



Fits:
Porsche 911 / 912 / 930 1966-89
Porsche 914 1970-76


Performance

Today's sticky tire compounds generate corner loads that easily compress factory rubber bushings causing wandering alignment settings. The result is that camber and toe change unpredictably, making steering imprecise and the car difficult to drive fast.

Monoball Cartridges replace compliant factory rubber bushings with hardened-steel spherical bearings. Unlike poly bushings that bind and resist movement, true spherical bearings allow free motion on multiple axis.

• Precise, razor sharp handling
• Holds alignment settings true
• Weather-Sealed for long life
• Eliminates camber loss due to compression
• Extremely low friction

Weather Seals
Our proprietary-design Monoball cartridges have optional weather seals to keep dirt out and extend product life.

This is the only Monoball suitable for street or extended track use. Dirt and water contaminate ordinary products and accelerate wear.

Fitment

Front monoballs fit easily into the stock camber plates of 67-89 911/912/930 cars (911 341 018 00). Cars with pre-67 camber plates are recommended to switch to a 67-89 camber plate for fitment. 65 cars without camber plates require grinding to enlarge the strut top opening to allow fitment of the cartridges.

Easy Bushing Replacement How-To

Your existing bushings are pressed in place, they will need to be pressed out, and you will need to press in the new bushings but it's really easy when you have the right tools. To ease and speed the bushing removal and installation process without using a shop press please see our purpose designed Split Bushing Removal Tool and our Bushing Installation tool.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

2011000

您正在查看的产品与这些编号存在交叉引用关系

Dust Tubes for Front Shock Absorber Boge. 



Fits:
Porsche 911 - 1969 to 1989
For Boge suspension legs

Click 'Zoom in' for large parts diagram.
Diagram ref no 6

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

91134180501

您正在查看的产品与这些编号存在交叉引用关系

Dust Tubes for Front Shock Absorber Boge. 



Fits:
Porsche 911 - 1969 to 1989
For Boge suspension legs

Click 'Zoom in' for large parts diagram.
Diagram ref no 6

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

91134180501

您正在查看的产品与这些编号存在交叉引用关系

Front extended upper perches.
use ONLY with QuickChange camber plates  2152200
1 kit, req'd per car.



Fits:
Porsche 911 / 912 / 930 / 914 1965-1989


Product description:

Coilover springs increase the diameter of front struts, often contacting the chassis such that the spring diameter limits the available camber adjustment range.
These extended-length upper spring perches solve the problem by moving the spring down where it won't contact the chassis.

Some cars can get over a degree of added camber adjustment range.

Extended-length perches are available for 2.25″ springs. You can add a 2.25″ to 2.5″ adaptor to use with 2.5″ springs.

Available with a 26mm ID for use only with QuickChange camber plates and with a 16mm ID for use with conventional camber plates.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

2280902

您正在查看的产品与这些编号存在交叉引用关系

Front extended upper perches.
for stock and offset camber plates
1 kit, req'd per car.



Fits:
Porsche 911 / 912 / 930 / 914 1965-1989


Product description:

Coilover springs increase the diameter of front struts, often contacting the chassis such that the spring diameter limits the available camber adjustment range.
These extended-length upper spring perches solve the problem by moving the spring down where it won't contact the chassis.

Some cars can get over a degree of added camber adjustment range.

Extended-length perches are available for 2.25″ springs. You can add a 2.25″ to 2.5″ adaptor to use with 2.5″ springs.

Available with a 26mm ID for use only with QuickChange camber plates and with a 16mm ID for use with conventional camber plates.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

2280904

您正在查看的产品与这些编号存在交叉引用关系

Front knuckle spacer ring.


Fits:
Porsche 911 1965-68

Click 'Zoom in' for large parts diagram.
Diagram ref no 12

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

90134166100

您正在查看的产品与这些编号存在交叉引用关系

减震器支柱的支撑架。
正面



適用於:
保时捷 911 1965-08/68 SWB
保时捷 912 1965-08/68 SWB

单击“放大”可查看大部件图。
图表参考编号 5

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

90134101801

您正在查看的产品与这些编号存在交叉引用关系

高清运动型前支撑架顶部安装座。一套 2 件。肖氏硬度 85

适合:
保时捷 911 / 912 / 930 / 914 全部 1969-89 年
不适合 SWB 车型

适用于您的 911/914 的高密度前支撑架不仅可替换磨损的原厂橡胶件，还能带来更佳的操控性和乘坐体验，且不会过硬。其刚度比原厂高出 25%，堪称一项绝佳的折衷方案，得益于其更高的刚度，前悬架在颠簸路面和转弯时能够保持更佳的定位和几何形状。即使在赛道上，这些支撑架也能提供更接近原厂的驾乘体验，而非我们更注重赛道的全外倾角板和单球式支撑架。

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

91134101800

您正在查看的产品与这些编号存在交叉引用关系

Front Shock Absorber Rubber Mount Bush.



Fits:
Porsche 911 1965-68


Price shown is for each.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

90134169503

您正在查看的产品与这些编号存在交叉引用关系

前支柱顶置衬套
成对出售（两个支柱顶部）

适用于零件编号：91134101800



適用於:
保时捷 911 1965-1989
保时捷 914 1970-1976

单击“放大”可查看大部件图。
适合图表上的第 9 号。

Powerflex。用聚氨酯悬架衬套替换您的汽车橡胶悬架衬套将为您带来以下好处：

- 更好的抓地力
- 恒定转向几何
- 延长轮胎寿命
- 转向更灵敏
- 悬架部件的使用寿命更长

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

PFF57-406

您正在查看的产品与这些编号存在交叉引用关系

Front strut top mount bush
Sold as a pair (both strut tops)

Fits onto part number: 91134101800



Fits:
Porsche 911 1965-1989
Porsche 914 1970-1976

Click 'Zoom in' for large parts diagram.
Fits to No 9 on the diagram.


Powerflex Black Series - Designed for the Track - Ready to Race - Engineered to be the best.

Powerflex Black Series bushes are manufactured using a 95 Shore A compound to provide maximum control of chassis geometry. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material.

If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

PFF57-406BLK

您正在查看的产品与这些编号存在交叉引用关系

Front strut top mount bush
Sold as a pair (both strut tops)

Fits onto part number: 91134101800



Fits:
Porsche 911 1965-1989
Porsche 914 1970-76

Click 'Zoom in' for large parts diagram.
Fits to No 9 on the diagram.

Powerflex Heritage Collection. For Modern Day Classics.

POWERFLEX Heritage Collection bushes are manufactured using modern day materials with properties biased for the road. These dark grey coloured bushes will improve any collectors car, whilst retaining the same standard appearance of a rubber bush.

POWERFLEX Heritage Collection bushes are manufactured using modern day materials with properties biased for the road. These dark grey coloured bushes will improve any collector's car, whilst retaining the same standard appearance of a rubber bush.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

PFF57-406H

您正在查看的产品与这些编号存在交叉引用关系

前顶部安装盘头螺钉。M10 X 20

适合:
保时捷911（1965-89年）
保时捷 930 1975-89
保时捷914 1970-76

图表参考编号 15

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

90006706303

您正在查看的产品与这些编号存在交叉引用关系

Inner Locking Ring for Front Shock Absorber.



Fits:
Porsche 911 1969-89

Click 'Zoom in' for large parts diagram.
Diagram ref no 14

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

91134180401

您正在查看的产品与这些编号存在交叉引用关系

O 型圈轮毂轴承垫圈- 25,3 x 2,4
单独出售 - 每辆车需 2 个

適用於:
保时捷 911 - 1965 年至 1989 年
保时捷 914 - 1970 年至 1976 年

图表参考编号 23

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99970108450

您正在查看的产品与这些编号存在交叉引用关系