经典 |Safari及避震悬架套件

Coilover brake line support bracket  kit. 



Fits:
Porsche 911 - 1965 to 1989

Standard front struts have welded-on brackets to support the brake hard line. Threaded body coilover struts and coilover sleeve conversion require the removal of these brackets, leaving the brake lines unsupported and prone to failure – always at the worst possible time.

• Our support bracket kit is an easy bolt-on support for the brake lines and bolts to existing threaded holes on the strut.
  
• Easy bolt-on – Attaches to the brake dust shield mounting holes using provided hardware. dust shields can be retained or removed.
• Prevents brake hard line flex / fatigue – Supports the brake hard line. Unsupported, the hard line will constantly flex and eventually leak.
• Quality throughout – Purpose made brackets are laser – cut from stainless steel and pre-formed. Top quality hardware is provided to complete the kit.

Coilover main spring front. 
Sold each - 2 required per car



Fits:
Porsche 911 - 1965 to 1989

Hypercoil Main Springs

Main Spring – The finest springs available, Hypercoil.
Choose from a broad selection of rates, here are a few popular front/rear choices:

Spring Type

• 200/300lb – Street performance, canyon carver
• 300/400lb – Autocross, Driver Education
• 400/600lb – Race

Will require a set of helper springs to be added

前后绞牙辅助弹簧。
单个出售 - 每轴需要 2 个

#大象赛跑#

適用於:

保时捷 911 - 1965 年至 1989 年

辅助弹簧的弹性系数很低，在汽车重量的作用下会破裂，其目的是当车轮在急转弯（抬起的车轮）、颠簸路面和千斤顶下完全下垂时，保持主弹簧的张紧。

在任何绞牙避震装置中，主弹簧在完全下垂时会失去张力，因此需要辅助弹簧 - 大多数绞牙避震装置都是如此。如果以下公式成立，则需要辅助弹簧：

转角重量 / 车轮比率 < 回弹行程

如果没有助手，主弹簧可能无法正确重新就位，并会导致该角的重量/高度突然改变。

主弹簧和辅助弹簧之间需要正确的弹簧分配器硬件。

辅助弹簧有多种直径和长度可供选择。

Front extended upper perches.
use ONLY with QuickChange camber plates  2152200
1 kit, req'd per car.



Fits:
Porsche 911 / 912 / 930 / 914 1965-1989


Product description:

Coilover springs increase the diameter of front struts, often contacting the chassis such that the spring diameter limits the available camber adjustment range.
These extended-length upper spring perches solve the problem by moving the spring down where it won't contact the chassis.

Some cars can get over a degree of added camber adjustment range.

Extended-length perches are available for 2.25″ springs. You can add a 2.25″ to 2.5″ adaptor to use with 2.5″ springs.

Available with a 26mm ID for use only with QuickChange camber plates and with a 16mm ID for use with conventional camber plates.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

2280902

您正在查看的产品与这些编号存在交叉引用关系

Front extended upper perches.
for stock and offset camber plates
1 kit, req'd per car.



Fits:
Porsche 911 / 912 / 930 / 914 1965-1989


Product description:

Coilover springs increase the diameter of front struts, often contacting the chassis such that the spring diameter limits the available camber adjustment range.
These extended-length upper spring perches solve the problem by moving the spring down where it won't contact the chassis.

Some cars can get over a degree of added camber adjustment range.

Extended-length perches are available for 2.25″ springs. You can add a 2.25″ to 2.5″ adaptor to use with 2.5″ springs.

Available with a 26mm ID for use only with QuickChange camber plates and with a 16mm ID for use with conventional camber plates.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

2280904

您正在查看的产品与这些编号存在交叉引用关系

Race Spec Coilover Main Spring Rear. 
Sold each - 2 required per car



Fits:
Porsche 911 - 1965 to 1989

Hypercoil Main Springs

Main Spring – The finest springs available, Hypercoil.
Choose from a broad selection of rates, here are a few popular front/rear choices:

Spring Type

• 200/300lb – Street performance, canyon carver
• 300/400lb – Autocross, Driver Education
• 400/600lb – Race

Will require a set of helper springs to be added

Rear extended upper perches. Super-Extended Length.
1 pair req'd per car.



Fits:
Porsche 911/912/930 1965-71

Coilover springs do not fit into the top of the tapered chassis cavities where the rear shocks mount.
These extended-length upper spring perches solve the problem by moving the spring down where it doesn't contact the chassis.

The perches are available for 2.25″ springs. Or you can add a 2.25″ to 2.5″ adapter to use 2.5″ springs.

They have a 14mm ID to fit Von Shocks, Bilstein RSR, HD, and Sport shocks.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

2280916

您正在查看的产品与这些编号存在交叉引用关系

竞赛规格绞牙避震主弹簧后部。
单独出售 - 每辆车需 2 个

#大象赛跑#

適用於:
保时捷 911 - 1965 年至 1989 年

超线圈主弹簧

主弹簧 – 市面上最优质的弹簧，Hypercoil。
有多种价格供您选择，以下是一些受欢迎的前/后选择：

弹簧类型

• 200/300lb – 街头表演，峡谷雕刻
• 300/400 磅 – 汽车越野赛、驾驶员教育
• 400/600 磅 – 比赛

需要添加一组辅助弹簧