马勒发动机气缸

气缸固定螺母，6 件套，适用于保时捷 911

#斯托姆斯基#

这些专门设计和制造的螺母可在重建期间将 911 气缸固定到位。螺母可轻松旋转曲柄并安装活塞/气缸，而不会使气缸滑出机壳。采用 2011 铝材精心制造，阳极氧化处理，可使用多年。每个螺母都配有特殊的 Delrin 衬垫，以保护您的气缸。

一套六件。

Engine cylinder / liner.



Fits:
Engine codes: 911.01 / 911.04
Porsche 911E 2.2L 114kw / 80 - 155PS
09/1969 - 02/1972

Cyl. Bore: 84,000 mm
Outer diameter: 92,000 mm
Length: 120,000 mm
Height: 85,500 mm
Flange Ø: 107,000 mm

Please note: These pistons will need to be purchased as 6 pcs. Singles are not available. Price displayed is for each piston.

This set should only be fitted by engine builders or tuners as other parts may be required.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

503WR19

您正在查看的产品与这些编号存在交叉引用关系

Engine cylinder / liner.



Fits:
Engine codes: 911.52 / 911.55 / 911.62
Porsche 911E 2.4L 121kw / 165PS
08/1971 - 12/1973

Cyl. Bore: 84,000 mm
Outer diameter: 92,000 mm
Length: 120,000 mm
Height: 85,500 mm
Flange Ø: 107,000 mm

Please note: These pistons will need to be purchased as 6 pcs. Singles are not available. Price displayed is for each piston.

This set should only be fitted by engine builders or tuners as other parts may be required.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

503WR19

您正在查看的产品与这些编号存在交叉引用关系

Engine cylinder / liner.



Fits:
Engine codes: 911.02
Porsche 911S 2.2L
09/1969 - 02/1972

Cyl. Bore: 84,000 mm
Outer diameter: 92,000 mm
Length: 120,000 mm
Height: 85,500 mm
Flange Ø: 107,000 mm

Please note: These pistons will need to be purchased as 6 pcs. Singles are not available. Price displayed is for each piston.

This set should only be fitted by engine builders or tuners as other parts may be required.

Covers part numbers:
91110391801, 91110391802, 91110391891,

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

503WR19

您正在查看的产品与这些编号存在交叉引用关系

Engine cylinder / liner.



Fits:
Engine code: 911.53 / 911.56
Porsche 911S 2.4L 140Kw / 190PS
08/1971 - 08/1973

Cyl. Bore: 84,000 mm
Outer diameter: 92,000 mm
Length: 120,000 mm
Height: 85,500 mm
Flange Ø: 107,000 mm

Please note: These pistons will need to be purchased as 6 pcs. Singles are not available. Price displayed is for each piston.

This set should only be fitted by engine builders or tuners as other parts may be required.

Special order item and subject to 20% restocking or cancellation fee.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

503WR19

您正在查看的产品与这些编号存在交叉引用关系

Engine cylinder / liner.
Needs 6, sold each.



Fits:
Porsche 911T 2.2L 01/70 - 12/72 92KW/ 125HP

Cyl. Bore: 84,000 mm,
Outer diameter: 92,000 mm,
Length: 121,000 mm,
Height: 85,500 mm,
Flange Ø: 107,000 mm

Please note: These pistons will need to be purchased as 6 pcs. Singles are not available. Price displayed is for each piston.

This set should only be fitted by engine builders or tuners as other parts may be required.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

503WR0600

您正在查看的产品与这些编号存在交叉引用关系

发动机气缸/衬套。

適用於:
保时捷 911T 2.4L / 2.4L TE 1972-73
引擎代码：
911.51 / 911.54 / 911.57 / 911.58 /911.61 / 911.67

缸径：84,000 毫米，
外径：92,000 毫米，
长度：121,000 毫米，
高度：85,500 毫米，
法兰直径：107,000 毫米

请注意：这些活塞需要购买 6 件。不提供单件。显示的价格为每个活塞的价格。

该套件仅应由发动机制造商或调谐器安装，因为可能需要其他零件。

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

503WR0600

您正在查看的产品与这些编号存在交叉引用关系