Front control arm bushing. This part number supersedes to 91434142202 原装 Porsche 零部件 91434142200

前控制臂衬套。前控制臂前侧的衬套 - 需要 2 个。
价格为每个价格。



適用於:
保时捷 911/911S 1965-1967
保时捷 912 1965-1967

图表参考编号 10

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

91434142202

您正在查看的产品与这些编号存在交叉引用关系

Low-friction control arm mounts.
1 pair req'd per car.



Fits:
Porsche 911 / 912 / 930 1968-89

Non-Binding, Friction- Free Movement
Elephant Racing's proprietary-design Low-Friction Control Arm Mounts allow for free control arm movement, eliminating any potential for binding. We've corrected a key factory design limitation; our mounts self-align in all axis, becoming collinear to avoid binding as the arm moves through its range of motion.

Factory Mounts and Binding
911 series and 914 factory control arm mounts pivot allow for self-alignment in the horizontal plane only. Any misalignment in the vertical plane results in pinching and binding at the bushing that resists free movement of the control arm.
Non-colinear axis binding

Factory mounting points (stamped sheet metal) are imprecise at best and can be substantially off due to frontal impacts, pot holes, or suspension pan replacement. If the mounts are not collinear, the control arm will bind with any performance bushing compound or bearing.

Self-Aligning Low-Friction Mounts
Our Low-Friction Control Arm Mounts self-align in both the horizontal and vertical planes. The result is collinear front and rear mounts delivering smooth non-binding action. You get superior performance and a smoother ride.

Control Arm Mount Kit
Kit includes everything required to upgrade one car. Factory rear mounts are replaced with our self-aligning mounts. Factory front mounts are retained and augmented with self-aligning washers.

With this kit installed, both front and rear control arm mounts self-align in both vertical and horizontal planes. They become collinear, allowing free non-binding motion of the control arm.

Our mounts replicate the factory form factor and work in conjunction with Polybronze bearings, polyurethane, or any other hard compound bushing or bearing. Fits both aluminum and steel suspension cross-members.

For Fitting Instructions please CLICK HERE

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

2071600

您正在查看的产品与这些编号存在交叉引用关系

Front control A arm rubber bushing kit. 1 kit required per car.
DIY Bushings Kit.



Fits:
Porsche 911/912/930/914 1968-89 with installation tools

Front control arm rubber bushings are now available as a kit for self-installation. In addition to a complete set of 4 OEM spec rubber bushings, the kit includes our proprietary installation tools and instructions which are essential for successful installation. Use a pipe clamp or shop press to complete the install.

Restore Ride and Performance
Rubber is the choice if you want to restore factory ride and performance in a zero-maintenance solution.

Quality Design
Don't confuse Elephant Racing OEM spec control arm bushings with inferior products offered without installation tools. Those products have a loose fit to allow tool-less installation. The loose fit causes excessive bushing deformation, torsion bar rubbing, premature wear, bushing slippage, and changing corner balance. Be sure you are getting genuine Elephant Racing OEM spec bushings.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

2290000

您正在查看的产品与这些编号存在交叉引用关系

前控制臂衬套。前控制臂前侧的衬套 - 需要 2 个。
价格为每个价格。



適用於:
保时捷 911/911S 1965-1967
保时捷 912 1965-1967

图表参考编号 10

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

91434142202

您正在查看的产品与这些编号存在交叉引用关系

Powerflex front control arm bushing. Bushing on the front side of the front control arm.
Sold as a pair (both arms)

OEM Part Number: 91434142200, 91434142201

Fits:
Porsche 911/911S 1965-1967
Porsche 912 1965-1967

Click 'Zoom in' for large parts diagram.
Diagram ref no 10

Powerflex. Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:

- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

PFF57-1401

您正在查看的产品与这些编号存在交叉引用关系

Powerflex 黑色系列前控制臂衬套。位于前控制臂前侧的衬套。

成对出售（双臂）



OEM零件编号：91434142200、91434142201

适合:
保时捷911/911S 1965-1967
保时捷912 1965-1967

单击“放大”可查看大部件图。
图表参考编号 10

Powerflex 黑色系列- 专为赛道设计 - 随时准备比赛 - 精心打造，力求最佳。

Powerflex 黑色系列衬套采用 95 肖氏硬度 A 复合材料制成，可最大程度地控制底盘几何形状。这种复合材料的抗负载能力比标准橡胶高出 80%，硬度比我们的紫色高性能材料高出 25%。

如果您的要求纯粹是极致的操控性和底盘性能，那么 Powerflex Black 系列是独一无二的，可为您的底盘提供最精确、最准确的定位。

使用聚氨酯悬架衬套替换您的汽车橡胶悬架衬套将为您带来以下好处：

- 更好的抓地力
- 恒定转向几何
- 延长轮胎寿命
- 转向响应更灵敏
- 悬架部件的使用寿命更长

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

PFF57-1401BLK

您正在查看的产品与这些编号存在交叉引用关系

Powerflex Heritage Collection 前控制臂衬套。前控制臂前侧的衬套。
成对出售（双臂）



OEM 零件编号：91434142200, 91434142201

適用於:
保时捷 911/911S 1965-1967
保时捷 912 1965-1967

单击“放大”可查看大部件图。
图表参考编号 10

Powerflex 传统系列。适用于现代经典。

专为道路设计的一系列衬套可与您的老爷车相得益彰。

POWERFLEX Heritage Collection 衬套采用现代材料制成，具有偏向公路的特性。这些深灰色衬套将改善任何收藏家的汽车，同时保留橡胶衬套的相同标准外观。

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

PFF57-1401H

您正在查看的产品与这些编号存在交叉引用关系

Powerflex 前叉臂（A 型框架）后橡胶衬套。
成对出售（双臂）



適用於:
保时捷 911/911S 1965-1967

单击“放大”可查看大部件图。
图表参考编号 2

Powerflex。用聚氨酯悬架衬套替换您的汽车橡胶悬架衬套将为您带来以下好处：

- 更好的抓地力
- 恒定转向几何
- 延长轮胎寿命
- 转向更灵敏
- 悬架部件的使用寿命更长

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

PFF57-1402

您正在查看的产品与这些编号存在交叉引用关系

Powerflex Black series front wishbone (A-Frame) rear rubber bush.
Sold as a pair (both arms)



Fits:
Porsche 911/911S 1965-1967

Click 'Zoom in' for large parts diagram.
Diagram ref no 2

Powerflex Black Series - Designed for the Track - Ready to Race - Engineered to be the best.

Powerflex Black Series bushes are manufactured using a 95 Shore A compound to provide maximum control of chassis geometry. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material.

If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.

Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:

- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

PFF57-1402BLK

您正在查看的产品与这些编号存在交叉引用关系