消声器旁通排气系统，RACE。保时捷 997.1 Turbo - FSPOR997TMBCB
Fabspeed
FSPOR997TMBCB
Product Information
竞赛 - 旁通管道
非常激进的“直管”系统，使用适用于街道或赛车应用的非限制性旁通解决方案取代/绕过工厂排气。
特征：
•适合所有保时捷 997 Turbo 车辆（2006-2009 年）
• 提供街道或竞赛配置（包括用于街道的 200 单元 HJS 运动猫或用于竞赛的猫旁路管道）
• 减轻车辆后部 45 磅的重量
• 优化以实现最大性能，保证无发动机故障灯（街道）
• 包含您所选饰面的豪华四重风格尖头。
• 采用高品质 14-16 号 CNC 芯轴弯曲 T304L 不锈钢制成，可实现最佳流动性和最大耐用性
• 直接用螺栓固定更换原厂排气装置
• 所有 Fabspeed 性能产品均享受 Fabspeed 终身保修
我们选择 HJS 催化转化器的原因：
HJS 德国进口催化转换器采用催化转换器中最高等级的材料制成。这可提高性能并延长使用寿命，因此不会像低等级催化转换器那样随着时间的推移而变质。这些催化转换器在大多数应用中的流量高达直管的 93-95%。其好处是，您可以获得“直管声音”，同时仍能提供足够的排放净化以防止发动机故障灯亮起。
请注意：这是按订单生产的特殊订单商品。在某些情况下，请留出 4 - 5 周的时间进行交货。一旦您下订单，就无法取消此供应商的特殊订单商品。
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
FSPOR997TMBCB
您正在查看的产品与这些编号存在交叉引用关系
Product Information
Fabspeed 消声器旁通排气系统竞赛 - 旁通管道
非常激进的“直管”系统，使用适用于街道或赛车应用的非限制性旁通解决方案取代/绕过工厂排气。
特征：
•适合所有保时捷 997 Turbo 车辆（2006-2009 年）
• 提供街道或竞赛配置（包括用于街道的 200 单元 HJS 运动猫或用于竞赛的猫旁路管道）
• 减轻车辆后部 45 磅的重量
• 优化以实现最大性能，保证无发动机故障灯（街道）
• 包含您所选饰面的豪华四重风格尖头。
• 采用高品质 14-16 号 CNC 芯轴弯曲 T304L 不锈钢制成，可实现最佳流动性和最大耐用性
• 直接用螺栓固定更换原厂排气装置
• 所有 Fabspeed 性能产品均享受 Fabspeed 终身保修
我们选择 HJS 催化转化器的原因：
HJS 德国进口催化转换器采用催化转换器中最高等级的材料制成。这可提高性能并延长使用寿命，因此不会像低等级催化转换器那样随着时间的推移而变质。这些催化转换器在大多数应用中的流量高达直管的 93-95%。其好处是，您可以获得“直管声音”，同时仍能提供足够的排放净化以防止发动机故障灯亮起。
请注意：这是按订单生产的特殊订单商品。在某些情况下，请留出 4 - 5 周的时间进行交货。一旦您下订单，就无法取消此供应商的特殊订单商品。
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
FSPOR997TMBCB
99711102772
您正在查看的产品与这些编号存在交叉引用关系
产品车辆组
产品车辆组
- Porsche 997 TURBO 2007>>
选择排气管：
价格低至: €2,349.62 含 VAT
安全购物
12 个月保修
全球交付
Request a
Trade Price Match
相关产品
FSPOR970TMAX
Product Information
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
FSPOR970TMAX
您正在查看的产品与这些编号存在交叉引用关系
Product Information
Fabspeed Maxflo 性能排气系统。在整个 RPM 范围内，通过更嘶哑、更深沉的排气音来提高功率并减轻重量；包括黑色、抛光或碳纤维豪华四式尖端
特征：
•适合所有保时捷 970 Panamera Turbo/Turbo S 车辆（2010 年以后），包括 Executive 车型
• 提高动力和油门响应
包括 Fabspeed 豪华四头式尖端，抛光铬或黑铬饰面
• 在整个 RPM 范围内改善跑车的声音和动力
• 采用高品质 14-16ga CNC 芯轴弯曲 T304L 不锈钢制成，可实现最佳流动性和最大耐用性
• 直接用螺栓固定替换限制性的工厂消声器
• 所有 Fabspeed 性能产品均享有 Fabspeed 终身有限保修
请注意：此为特殊订单商品，需按订单生产。部分情况下，请预留4至5周的配送时间。特殊订单商品一旦下单，将无法取消。
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
FSPOR970TMAX
97011191274
97011191275
97011191276
97011191277
97011191278
97011192471
97011192472
97011191174
97011191175
97011191176
97011191177
97011191178
97011192371
97011192372
您正在查看的产品与这些编号存在交叉引用关系
产品车辆组
产品车辆组
- Porsche Panamera Turbo V8 4.8L
- Porsche Panamera Turbo S V8 4.8L
- Porsche Panamera Turbo V8 4.8L (520Hp)
- Porsche Panamera Turbo V8 Executive
- Porsche Panamera Turbo S V8 4.8L
尾管饰面：
价格低至: €3,239.63 含 VAT
安全购物
12 个月保修
全球交付
Request a
Trade Price Match
TSPOPAN09.003.AN
Product Information
Loud version without exhaust valve
Fits:
Porsche 970.1 and 970.2 Panamera turbo and turbo S (2010-2016)
This exhaust system is not street legal. These mufflers can be fitted both on 2WD and 4WD modelsThe component is perfectly interchangeable with the original components, following the instructions in the constructor's workshop manual
RACETRACK USE ONLY
These components are designed and developed for racetrack use and to maximise the car's performance. They are not street legal and must be installed by professionals in the sector
EXHAUST VALVE - NO VALVE
The exhaust system does not include a valve and always guarantees the most impressive sound. If the standard system includes one, control of the valve by both the engine ECU and by the pilot via the specific control systems is no longer possible
SOUND - TUBI SOUND
Tubi Sound is the standard sound of Tubi Style exhausts, louder and more powerful than the original sound. This sound represents our brand
END TIPS DESIGN - STRAIGHT CUT
Straight-cut tailpipe with internal rolled lip
END TIPS DIMENSION - 90mm
The value refers to the external dimensions of the exhaust end tip
SYSTEM FINISH - POLISHED
Mirror finishes are highly reflective and created by polishing the stainless steel. The polishing process enhances appearance and consistency, making cleaning easier. A special rolling procedure is used. It is essential to remove deep scratches as any surface defects will be very noticeable on the finished product. it improves corrosion resistance. The polishing eradicates crevices where corrosive particles can lodge themselves
END TIPS NUMBER AND POSITION - 2 + 2 AT THE SIDES
The tailpipes are located low down at the sides of the car. There are two tailpipes at each side
MATERIAL - AISI 304 STAINLESS STEEL
A choice stainless steel ideal for aggressive environments where combustion emissions can cause serious chemical corrosion on other types of metal
MAIN PIPE DIMENSION - 65mm
This is the diameter of the main pipe of the exhaust system
EXHAUST VALVE - NO VALVE
The exhaust system does not include a valve and always guarantees the most impressive sound. If the standard system includes one, control of the valve by both the engine ECU and by the pilot via the specific control systems is no longer possible
Product Information
Sports exhaust loud silencers. Loud version without exhaust valve
Fits:
Porsche 970.1 and 970.2 Panamera turbo and turbo S (2010-2016)
This exhaust system is not street legal. These mufflers can be fitted both on 2WD and 4WD modelsThe component is perfectly interchangeable with the original components, following the instructions in the constructor's workshop manual
RACETRACK USE ONLY
These components are designed and developed for racetrack use and to maximise the car's performance. They are not street legal and must be installed by professionals in the sector
EXHAUST VALVE - NO VALVE
The exhaust system does not include a valve and always guarantees the most impressive sound. If the standard system includes one, control of the valve by both the engine ECU and by the pilot via the specific control systems is no longer possible
SOUND - TUBI SOUND
Tubi Sound is the standard sound of Tubi Style exhausts, louder and more powerful than the original sound. This sound represents our brand
END TIPS DESIGN - STRAIGHT CUT
Straight-cut tailpipe with internal rolled lip
END TIPS DIMENSION - 90mm
The value refers to the external dimensions of the exhaust end tip
SYSTEM FINISH - POLISHED
Mirror finishes are highly reflective and created by polishing the stainless steel. The polishing process enhances appearance and consistency, making cleaning easier. A special rolling procedure is used. It is essential to remove deep scratches as any surface defects will be very noticeable on the finished product. it improves corrosion resistance. The polishing eradicates crevices where corrosive particles can lodge themselves
END TIPS NUMBER AND POSITION - 2 + 2 AT THE SIDES
The tailpipes are located low down at the sides of the car. There are two tailpipes at each side
MATERIAL - AISI 304 STAINLESS STEEL
A choice stainless steel ideal for aggressive environments where combustion emissions can cause serious chemical corrosion on other types of metal
MAIN PIPE DIMENSION - 65mm
This is the diameter of the main pipe of the exhaust system
EXHAUST VALVE - NO VALVE
The exhaust system does not include a valve and always guarantees the most impressive sound. If the standard system includes one, control of the valve by both the engine ECU and by the pilot via the specific control systems is no longer possible
产品车辆组
产品车辆组
- Porsche Panamera Turbo V8 4.8L
- Porsche Panamera Turbo S V8 4.8L
- Porsche Panamera Turbo V8 4.8L (520Hp)
- Porsche Panamera Turbo V8 Executive
€3,113.39 含 VAT
当前 €2,957.72 含 VAT
可订购 - 16 到 21 天
安全购物
12 个月保修
全球交付
Request a
Trade Price Match
TSPOPAN09.003.A
Product Information
Without exhaust valve
Fits:
Porsche 970.1 and 970.2 Panamera turbo and turbo S (2010-2016)
his exhaust system is not street legal. These mufflers can be fitted both on 2WD and 4WD modelsThe component is perfectly interchangeable with the original components, following the instructions in the constructor's workshop manual
RACETRACK USE ONLY
These components are designed and developed for racetrack use and to maximise the car's performance. They are not street legal and must be installed by professionals in the sector
EXHAUST VALVE - NO VALVE
The exhaust system does not include a valve and always guarantees the most impressive sound. If the standard system includes one, control of the valve by both the engine ECU and by the pilot via the specific control systems is no longer possible
SOUND - TUBI SOUND
Tubi Sound is the standard sound of Tubi Style exhausts, louder and more powerful than the original sound. This sound represents our brand
END TIPS DESIGN - STRAIGHT CUT
Straight-cut tailpipe with internal rolled lip
END TIPS DIMENSION - 90mm
The value refers to the external dimensions of the exhaust end tip
SYSTEM FINISH - POLISHED
Mirror finishes are highly reflective and created by polishing the stainless steel. The polishing process enhances appearance and consistency, making cleaning easier. A special rolling procedure is used. It is essential to remove deep scratches as any surface defects will be very noticeable on the finished product. it improves corrosion resistance. The polishing eradicates crevices where corrosive particles can lodge themselves
END TIPS NUMBER AND POSITION - 2 + 2 AT THE SIDES
The tailpipes are located low down at the sides of the car. There are two tailpipes at each side
MATERIAL - AISI 304 STAINLESS STEEL
A choice stainless steel ideal for aggressive environments where combustion emissions can cause serious chemical corrosion on other types of metal
MAIN PIPE DIMENSION - 65mm
This is the diameter of the main pipe of the exhaust system
EXHAUST VALVE - NO VALVE
The exhaust system does not include a valve and always guarantees the most impressive sound. If the standard system includes one, control of the valve by both the engine ECU and by the pilot via the specific control systems is no longer possible
Product Information
Sports exhaust silencers. Without exhaust valve
Fits:
Porsche 970.1 and 970.2 Panamera turbo and turbo S (2010-2016)
his exhaust system is not street legal. These mufflers can be fitted both on 2WD and 4WD modelsThe component is perfectly interchangeable with the original components, following the instructions in the constructor's workshop manual
RACETRACK USE ONLY
These components are designed and developed for racetrack use and to maximise the car's performance. They are not street legal and must be installed by professionals in the sector
EXHAUST VALVE - NO VALVE
The exhaust system does not include a valve and always guarantees the most impressive sound. If the standard system includes one, control of the valve by both the engine ECU and by the pilot via the specific control systems is no longer possible
SOUND - TUBI SOUND
Tubi Sound is the standard sound of Tubi Style exhausts, louder and more powerful than the original sound. This sound represents our brand
END TIPS DESIGN - STRAIGHT CUT
Straight-cut tailpipe with internal rolled lip
END TIPS DIMENSION - 90mm
The value refers to the external dimensions of the exhaust end tip
SYSTEM FINISH - POLISHED
Mirror finishes are highly reflective and created by polishing the stainless steel. The polishing process enhances appearance and consistency, making cleaning easier. A special rolling procedure is used. It is essential to remove deep scratches as any surface defects will be very noticeable on the finished product. it improves corrosion resistance. The polishing eradicates crevices where corrosive particles can lodge themselves
END TIPS NUMBER AND POSITION - 2 + 2 AT THE SIDES
The tailpipes are located low down at the sides of the car. There are two tailpipes at each side
MATERIAL - AISI 304 STAINLESS STEEL
A choice stainless steel ideal for aggressive environments where combustion emissions can cause serious chemical corrosion on other types of metal
MAIN PIPE DIMENSION - 65mm
This is the diameter of the main pipe of the exhaust system
EXHAUST VALVE - NO VALVE
The exhaust system does not include a valve and always guarantees the most impressive sound. If the standard system includes one, control of the valve by both the engine ECU and by the pilot via the specific control systems is no longer possible
产品车辆组
产品车辆组
- Porsche Panamera Turbo V8 4.8L
- Porsche Panamera Turbo S V8 4.8L
- Porsche Panamera Turbo V8 4.8L (520Hp)
- Porsche Panamera Turbo V8 Executive
€3,812.31 含 VAT
当前 €3,621.69 含 VAT
可订购 - 16 到 21 天
安全购物
12 个月保修
全球交付
Request a
Trade Price Match
