前保险杠插件，碳纤维。保时捷 992 GT3 RS

Carbon fibre front bumper dive plane kit.

Available in Gloss or Matte Carbon Fibre



Fits
Porsche 991.2 GT3 / GT3 RS - 2016 to 2018

The Dive Planes for the Porsche 991.2 GT3/GT3RS were specifically designed to increase front-end downforce, increase the high-pressure airflow to the factory intake duct, and to keep drag increase minimal.

Depending on driver preference, no rear aero is needed to balance out these units. We have seen up to 0.7 second gains due to increased front end grip at high speed corners which allows improved corner speed. If as a driver you feel the car needs more rear stability, we would not suggest these units without adding a rear aerodynamic device.

The units were designed in CAD using scan data and optimized using CFD within ANSYS Fluent.

These units are constructed from 1.5mm thick pre-preg, autoclaved cured, 2x2 twill carbon in both a matte and gloss clear coat.

Dive planes, also referred to as canards, allow you to shift the aero balance forward, possibly aiding you and your setup in balancing out a large rear wing or diffuser.

Kit Includes
• Dive Plane x 4 (Upper x 2, Lower x 2)
• 3M VHB Tape (4 Pieces, 1 for each Dive Plane)
• Install Template

前保险杠鸭翼采用高光泽碳纤维制成。

#沃施泰纳#

适合：

保时捷 991.1 911 GT3
保时捷 991.1 911 GT3RS
保时捷 991.1 911 R
保时捷 991.2 911 GT2RS

这些前保险杠鸭翼（俯冲机）旨在增加前端的下压力，采用预浸高压釜碳纤维制成，表面具有高光泽度。

可以使用双面胶带进行安装，以防止在工厂前保险杠上钻孔。

前保险杠下扰流板采用高光泽碳纤维。

#沃施泰纳#

适合：

保时捷 991.2 911 GT2 RS

前保险杠下扰流板旨在增加前端的下压力，从而提高稳定性和操控性。

由预浸高压釜碳纤维结构制成，具有高光泽的表面。