土比

运动型排气管和减少电池催化转化器。
不带汽油颗粒过滤器 (GPF)



适合:
保时捷 718 Boxster 2.0L - 无 GPF
保时捷 718 Boxster S 2.5Ltr - 无 GPF
保时捷 718 Cayman 2.0Ltr - 无 GPF
保时捷 718 Cayman S 2.5Ltr - 无 GPF

按照制造商车间手册中的说明，该部件可与原始部件完美互换

仅限赛道使用
这些部件专为赛道使用而设计和开发，旨在最大限度地提升车辆性能。它们不合法上路，必须由该领域的专业人员安装。

ECU 重新映射 - 为了性能
对于涡轮增压汽车，更换催化转化器可能会改变涡轮增压器的运行条件，并导致扭矩输出曲线恶化。为了确保充分利用新的赛车部件，必须重新编程发动机的ECU，以最大限度地提高性能。如果发动机警告灯亮起，则必须重新编程ECU以消除该警告灯。

材质 - AISI 304 不锈钢
适用于腐蚀性环境的不锈钢，在这种环境中，燃烧排放物可能会对其他类型的金属造成严重的化学腐蚀

减少电池催化转化器 - 200 个电池
赛车催化转化器的单元数量比标准原厂系统更少。这降低了排气背压，同时仍保持催化转化器的正常运转，并提升了性能和噪音。

隔热层 - 绝缘

注意：运动型催化转化器和旁通管未获得型式认证，法律不允许用于2001年3月1日后在英国生产的车辆。它们不符合MOT（机动车检查）标准，不得在公共道路上使用。这些部件仅适用于比赛和赛道使用。如果您位于英国境外，请查阅当地法律法规，以确保符合规定。

Tubi Style 采用与汽车制造商相同的技术制造的绝缘材料，确保为关键和危险位置的部件提供最大程度的保护

Sports exhaust silencers.
Without exhaust valve



Fits:
Porsche 970.1 and 970.2 Panamera turbo and turbo S (2010-2016)

his exhaust system is not street legal. These mufflers can be fitted both on 2WD and 4WD modelsThe component is perfectly interchangeable with the original components, following the instructions in the constructor's workshop manual

RACETRACK USE ONLY
These components are designed and developed for racetrack use and to maximise the car's performance. They are not street legal and must be installed by professionals in the sector

EXHAUST VALVE - NO VALVE
The exhaust system does not include a valve and always guarantees the most impressive sound. If the standard system includes one, control of the valve by both the engine ECU and by the pilot via the specific control systems is no longer possible

SOUND - TUBI SOUND
Tubi Sound is the standard sound of Tubi Style exhausts, louder and more powerful than the original sound. This sound represents our brand

END TIPS DESIGN - STRAIGHT CUT
Straight-cut tailpipe with internal rolled lip

END TIPS DIMENSION - 90mm
The value refers to the external dimensions of the exhaust end tip

SYSTEM FINISH - POLISHED
Mirror finishes are highly reflective and created by polishing the stainless steel. The polishing process enhances appearance and consistency, making cleaning easier. A special rolling procedure is used. It is essential to remove deep scratches as any surface defects will be very noticeable on the finished product. it improves corrosion resistance. The polishing eradicates crevices where corrosive particles can lodge themselves

END TIPS NUMBER AND POSITION - 2 + 2 AT THE SIDES
The tailpipes are located low down at the sides of the car. There are two tailpipes at each side

MATERIAL - AISI 304 STAINLESS STEEL
A choice stainless steel ideal for aggressive environments where combustion emissions can cause serious chemical corrosion on other types of metal

MAIN PIPE DIMENSION - 65mm
This is the diameter of the main pipe of the exhaust system

EXHAUST VALVE - NO VALVE
The exhaust system does not include a valve and always guarantees the most impressive sound. If the standard system includes one, control of the valve by both the engine ECU and by the pilot via the specific control systems is no longer possible

Sports exhaust loud silencers.
Loud version without exhaust valve



Fits:
Porsche 970.1 and 970.2 Panamera turbo and turbo S (2010-2016)

This exhaust system is not street legal. These mufflers can be fitted both on 2WD and 4WD modelsThe component is perfectly interchangeable with the original components, following the instructions in the constructor's workshop manual

RACETRACK USE ONLY
These components are designed and developed for racetrack use and to maximise the car's performance. They are not street legal and must be installed by professionals in the sector

EXHAUST VALVE - NO VALVE
The exhaust system does not include a valve and always guarantees the most impressive sound. If the standard system includes one, control of the valve by both the engine ECU and by the pilot via the specific control systems is no longer possible

SOUND - TUBI SOUND
Tubi Sound is the standard sound of Tubi Style exhausts, louder and more powerful than the original sound. This sound represents our brand

END TIPS DESIGN - STRAIGHT CUT
Straight-cut tailpipe with internal rolled lip

END TIPS DIMENSION - 90mm
The value refers to the external dimensions of the exhaust end tip

SYSTEM FINISH - POLISHED
Mirror finishes are highly reflective and created by polishing the stainless steel. The polishing process enhances appearance and consistency, making cleaning easier. A special rolling procedure is used. It is essential to remove deep scratches as any surface defects will be very noticeable on the finished product. it improves corrosion resistance. The polishing eradicates crevices where corrosive particles can lodge themselves

END TIPS NUMBER AND POSITION - 2 + 2 AT THE SIDES
The tailpipes are located low down at the sides of the car. There are two tailpipes at each side

MATERIAL - AISI 304 STAINLESS STEEL
A choice stainless steel ideal for aggressive environments where combustion emissions can cause serious chemical corrosion on other types of metal

MAIN PIPE DIMENSION - 65mm
This is the diameter of the main pipe of the exhaust system

EXHAUST VALVE - NO VALVE
The exhaust system does not include a valve and always guarantees the most impressive sound. If the standard system includes one, control of the valve by both the engine ECU and by the pilot via the specific control systems is no longer possible

Sports exhaust silencers.
With electronic exhaust valve



Fits:
Porsche Panamera 970.1 S and GTS - 2010-2013
Porsche Panamera 970.2 GTS 2013-2016

This exhaust system is not street legal. These mufflers can be fitted both on 2WD and 4WD models
The component is perfectly interchangeable with the original components, following the instructions in the constructor's workshop manual


RACETRACK USE ONLY
These components are designed and developed for racetrack use and to maximise the car's performance. They are not street legal and must be installed by professionals in the sector

EXHAUST VALVE - ELECTRIC
The exhaust system is complete with electric valve. The electric actuator is not included and the standard actuator already installed on the car must be used. Control of the original valve is still provided

SOUND - TUBI SOUND
Tubi Sound is the standard sound of Tubi Style exhausts, louder and more powerful than the original sound. This sound represents our brand

END TIPS NUMBER AND POSITION
2 + 2 AT THE SIDES
The tailpipes are located low down at the sides of the car. There are two tailpipes at each side

MATERIAL
AISI 304 STAINLESS STEEL
A choice stainless steel ideal for aggressive environments where combustion emissions can cause serious chemical corrosion on other types of metal

MAIN PIPE DIMENSION - 60
This is the diameter of the main pipe of the exhaust system

Sports exhaust silencers.
Without electronic exhaust valve



Fits:
Porsche Panamera 970.1 S and GTS - 2010-2013
Porsche Panamera 970.2 GTS 2013-2016

This exhaust system is not street legal. These mufflers can be fitted both on 2WD and 4WD models
The component is perfectly interchangeable with the original components, following the instructions in the constructor's workshop manual


RACETRACK USE ONLY
These components are designed and developed for racetrack use and to maximise the car's performance. They are not street legal and must be installed by professionals in the sector

EXHAUST VALVE - ELECTRIC
The exhaust system is complete with electric valve. The electric actuator is not included and the standard actuator already installed on the car must be used. Control of the original valve is still provided

SOUND - TUBI SOUND
Tubi Sound is the standard sound of Tubi Style exhausts, louder and more powerful than the original sound. This sound represents our brand

END TIPS NUMBER AND POSITION
2 + 2 AT THE SIDES
The tailpipes are located low down at the sides of the car. There are two tailpipes at each side

MATERIAL
AISI 304 STAINLESS STEEL
A choice stainless steel ideal for aggressive environments where combustion emissions can cause serious chemical corrosion on other types of metal

MAIN PIPE DIMENSION - 60
This is the diameter of the main pipe of the exhaust system

Sports exhaust loud silencers.
With electronic exhaust valve



Fits:
Porsche Panamera 970.1 S and GTS - 2010-2013
Porsche Panamera 970.2 GTS 2013-2016

This exhaust system is not street legal. These mufflers can be fitted both on 2WD and 4WD models
The component is perfectly interchangeable with the original components, following the instructions in the constructor's workshop manual


RACETRACK USE ONLY
These components are designed and developed for racetrack use and to maximise the car's performance. They are not street legal and must be installed by professionals in the sector

EXHAUST VALVE - ELECTRIC
The exhaust system is complete with electric valve. The electric actuator is not included and the standard actuator already installed on the car must be used. Control of the original valve is still provided

SOUND - TUBI SOUND
Tubi Sound is the standard sound of Tubi Style exhausts, louder and more powerful than the original sound. This sound represents our brand

END TIPS NUMBER AND POSITION
2 + 2 AT THE SIDES
The tailpipes are located low down at the sides of the car. There are two tailpipes at each side

MATERIAL
AISI 304 STAINLESS STEEL
A choice stainless steel ideal for aggressive environments where combustion emissions can cause serious chemical corrosion on other types of metal

MAIN PIPE DIMENSION - 60
This is the diameter of the main pipe of the exhaust system

Sports exhaust silencers.



Fits:
Porsche 971 Panamera turbo and turbo S - 2016 onwards

The component is perfectly interchangeable with the original components, following the instructions in the constructor's workshop manual

RACETRACK USE ONLY
These components are designed and developed for racetrack use and to maximise the car's performance. They are not street legal and must be installed by professionals in the sector

EXHAUST VALVE - ELECTRIC
The exhaust system is complete with electric valve. The electric actuator is not included and the standard actuator already installed on the car must be used. Control of the original valve is still provided

SOUND - TUBI SOUND
Tubi Sound is the standard sound of Tubi Style exhausts, louder and more powerful than the original sound. This sound represents our brand

END TIPS DESIGN - OE
The muffler must be used in conjunction with the original exhaust end tips

END TIPS NUMBER AND POSITION - 2 + 2 AT THE SIDES
The tailpipes are located low down at the sides of the car. There are two tailpipes at each side

MATERIAL
AISI 304 STAINLESS STEEL
A choice stainless steel ideal for aggressive environments where combustion emissions can cause serious chemical corrosion on other types of metal

MAIN PIPE DIMENSION - 70
This is the diameter of the main pipe of the exhaust system

Sports exhaust rear silencer for the Porsche 955 Cayenne S 2002-2007



Fits
4.5Ltr
Porsche Cayenne (955) S 2002-2007

RACETRACK USE ONLY
These components are designed and developed for racetrack use and to maximise the car's performance. They are not street legal and must be installed by professionals in the sector

The component is perfectly interchangeable with the original components, following the instructions in the constructor's workshop manual

SOUND - TUBI SOUND
Tubi Sound is the standard sound of Tubi Style exhausts, louder and more powerful than the original sound. This sound represents our brand

END TIPS NUMBER AND POSITION - 1 + 1 AT THE SIDES
The tailpipes are located low down at the sides of the car. There is one tailpipe at each side

MATERIAL
AISI 304 STAINLESS STEEL
A choice stainless steel ideal for aggressive environments where combustion emissions can cause serious chemical corrosion on other types of metal

MAIN PIPE DIMENSION - 65mm
This is the diameter of the main pipe of the exhaust system

EXHAUST VALVE - NO VALVE
The exhaust system does not include a valve and always guarantees the most impressive sound. If the standard system includes one, control of the valve by both the engine ECU and by the pilot via the specific control systems is no longer possible

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

04090581320

您正在查看的产品与这些编号存在交叉引用关系

Sports exhaust rear silencer for the Porsche 955 Cayenne turbo



Fits:
Porsche Cayenne (955) Turbo 2002-2006

RACETRACK USE ONLY
These components are designed and developed for racetrack use and to maximise the car's performance. They are not street legal and must be installed by professionals in the sector

The component is perfectly interchangeable with the original components, following the instructions in the constructor's workshop manual

SOUND - TUBI SOUND
Tubi Sound is the standard sound of Tubi Style exhausts, louder and more powerful than the original sound. This sound represents our brand

END TIPS NUMBER AND POSITION - 1 + 1 AT THE SIDES
The tailpipes are located low down at the sides of the car. There is one tailpipe at each side

MATERIAL
AISI 304 STAINLESS STEEL
A choice stainless steel ideal for aggressive environments where combustion emissions can cause serious chemical corrosion on other types of metal

MAIN PIPE DIMENSION - 65mm
This is the diameter of the main pipe of the exhaust system

EXHAUST VALVE - NO VALVE
The exhaust system does not include a valve and always guarantees the most impressive sound. If the standard system includes one, control of the valve by both the engine ECU and by the pilot via the specific control systems is no longer possible

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

04090571320

您正在查看的产品与这些编号存在交叉引用关系

Sports exhaust kit Porsche 981 Boxster S and Cayman S 2012-2016
Rear silencers



Fits:
Porsche 981 Boxster 3.4Ltr 2012-2016
Porsche Cayman 3.4Ltr 2012-2016

The component is perfectly interchangeable with the original components, following the instructions in the constructor's workshop manual

RACETRACK USE ONLY
These components are designed and developed for racetrack use and to maximise the car's performance. They are not street legal and must be installed by professionals in the sector

SOUND - + RUMORE
The + Rumore variant delivers the original Tubi Sound timbre but with the highest possible volume

SYSTEM FINISH - POLISHED
Mirror finishes are highly reflective and created by polishing the stainless steel. The polishing process enhances appearance and consistency, making cleaning easier. A special rolling procedure is used. It is essential to remove deep scratches as any surface defects will be very noticeable on the finished product. it improves corrosion resistance. The polishing eradicates crevices where corrosive particles can lodge themselves

END TIPS NUMBER AND POSITION - 2 CENTRAL
The end tips emerge from the centre

MATERIAL - AISI 304 STAINLESS STEEL
A choice stainless steel ideal for aggressive environments where combustion emissions can cause serious chemical corrosion on other types of metal

MAIN PIPE DIMENSION 55
This is the diameter of the main pipe of the exhaust system

EXHAUST VALVE - NO VALVE
The exhaust system does not include a valve and always guarantees the most impressive sound. If the standard system includes one, control of the valve by both the engine ECU and by the pilot via the specific control systems is no longer possible.

Sports exhaust and catalytic converter kit Porsche 987 Gen 2 Boxster and Cayman 2009-2012
Rear silencer and catalytic converters



Fits
Porsche 987 Gen 2 Boxster 2.9Ltr
Porsche 987 Gen 2 Boxster S 3.4Ltr
Porsche 987 Gen 2 Cayman 2.9Ltr
Porsche 987 Gen 2 Cayman S 3.4Ltr

RACETRACK USE ONLY
These components are designed and developed for racetrack use and to maximise the car's performance. They are not street legal and must be installed by professionals in the sector

SOUND - TUBI SOUND
Tubi Sound is the standard sound of Tubi Style exhausts, louder and more powerful than the original sound. This sound represents our brand

EXHAUST VALVE - NO VALVE
The exhaust system does not include a valve and always guarantees the most impressive sound. If the standard system includes one, control of the valve by both the engine ECU and by the pilot via the specific control systems is no longer possible

SYSYEM FINISH - POLISHED
Mirror finishes are highly reflective and created by polishing the stainless steel. The polishing process enhances appearance and consistency, making cleaning easier. A special rolling procedure is used. It is essential to remove deep scratches as any surface defects will be very noticeable on the finished product. it improves corrosion resistance. The polishing eradicates crevices where corrosive particles can lodge themselves

END TIPS NUMBER AND POSITION - 2 CENTRAL
The end tips emerge from the centre

MATERIAL - AISI 304 STAINLESS STEEL
A choice stainless steel ideal for aggressive environments where combustion emissions can cause serious chemical corrosion on other types of metal

MAIN PIPE DIMENSION 50mm
This is the diameter of the main pipe of the exhaust system

Please note: sports catalytic converters or bypass pipes do have type approval and may not be legally installed on vehicles manufactured after 1^st March 2001. They can not be used on a public road and are not MOT compliant, they are designed for race and track cars only. 

Sports exhaust rear silencer and catalytic converter kit
Porsche 987 Boxster and Cayman Gen 1 (2005-2008)
Reduced cell catalytic converter and sports exhaust



Fits:
Gen 1 2005-2008
Porsche Boxster 2.7Ltr
Porsche Boxster 3.2Ltr and 3.4Ltr
Porsche Cayman 2.7L
Porsche Cayman 3.4Ltr

The component is perfectly interchangeable with the original components, following the instructions in the constructor's workshop manual

RACETRACK USE ONLY
These components are designed and developed for racetrack use and to maximise the car's performance. They are not street legal and must be installed by professionals in the sector

REDUCED CATALYTIC CONVERTER CELLS - 300
Race catalytic converters have fewer cells than standard factory systems. This reduces exhaust back pressure while still cutting pollutant emissions and boosts power and sound

ECU REMAPPING - ENGINE LIGHT
Replacement or removal of components such as catalytic converters, GPFs and electric actuators may cause the engine warning light to come on. In this case, the installer must reprogram the software to eliminate the light

SOUND - TUBI SOUND
Tubi Sound is the standard sound of Tubi Style exhausts, louder and more powerful than the original sound. This sound represents our brand

AISI 304 STAINLESS STEEL
A choice stainless steel ideal for aggressive environments where combustion emissions can cause serious chemical corrosion on other types of metal

MAIN PIPE DIMENSION 55mm
This is the diameter of the main pipe of the exhaust system

Please note: sports catalytic converters or bypass pipes do have type approval and may not be legally installed on vehicles manufactured after 1^st March 2001. They can not be used on a public road and are not MOT compliant, they are designed for race and track cars only. 

Sports exhaust rear silencer and catalytic converter bypass kit
Porsche 987 Gen 1 Boxster and Cayman (2005-2008)
Removes catalytic converters



Fits:
Gen 1 2005-2008
Porsche Boxster 2.7Ltr
Porsche Boxster 3.2Ltr and 3.4Ltr
Porsche Cayman 2.7L
Porsche Cayman 3.4Ltr

The component is perfectly interchangeable with the original components, following the instructions in the constructor's workshop manual

RACETRACK USE ONLY
These components are designed and developed for racetrack use and to maximise the car's performance. They are not street legal and must be installed by professionals in the sector

CATALYTIC CONVERTER REMOVAL
Complete removal of the catalytic converter minimises exhaust back pressure and delivers optimum results in terms of performance and weight reduction

ECU REMAPPING - ENGINE LIGHT
Replacement or removal of components such as catalytic converters and electric actuators may cause the engine warning light to come on. In this case, the installer must reprogram the software to eliminate the light

SOUND - TUBI SOUND
Tubi Sound is the standard sound of Tubi Style exhausts, louder and more powerful than the original sound. This sound represents our brand

MATERIAL - AISI 304 STAINLESS STEEL
AISI 304 STAINLESS STEEL
A choice stainless steel ideal for aggressive environments where combustion emissions can cause serious chemical corrosion on other types of metal

MAIN PIPE DIMENSION - 57mm
This is the diameter of the main pipe of the exhaust system

EXHAUST VALVE - NO VALVE
The exhaust system does not include a valve and always guarantees the most impressive sound. If the standard system includes one, control of the valve by both the engine ECU and by the pilot via the specific control systems is no longer possible

Please note: sports catalytic converters or bypass pipes do have type approval and may not be legally installed on vehicles manufactured after 1^st March 2001. They can not be used on a public road and are not MOT compliant, they are designed for race and track cars only. 

Sports exhaust silencer with reduced 200 cell catalytic converter
Porsche 997.2 turbo and turbo S 2010-2013



Fits
Porsche 911 turbo 997 Gen 2
Porsche 911 turbo S 997 Gen 2

The component is perfectly interchangeable with the original components, following the instructions in the constructor's workshop manual

RACETRACK USE ONLY
These components are designed and developed for racetrack use and to maximise the car's performance. They are not street legal and must be installed by professionals in the sector

CATALYTIC CONVERTER REMOVAL - 200 CELLS
Race catalytic converters have fewer cells than standard factory systems. This reduces exhaust back pressure while still maintaining the operation of the catalytic converter, and improves performance and sound

ECU REMAPPING - FOR PERFORMANCE
On turbo cars, catalytic converter replacement may modify turbocharger operating conditions and cause a deterioration of the torque delivery curve. To ensure full benefit from the new racing component, the engine's ECU must be reprogrammed to maximise performance. If the engine warning light comes on, the ECU must always be reprogrammed to eliminate it

SOUND - TUBI SOUND
Tubi Sound is the standard sound of Tubi Style exhausts, louder and more powerful than the original sound. This sound represents our brand

END TIPS DESIGN - OE
The muffler must be used in conjunction with the original exhaust end tips

END TIPS NUMBER AND POSITION - 1 + 1 AT THE SIDES
The tailpipes are located low down at the sides of the car. There is one tailpipe at each side

MATERIAL - AISI 304 STAINLESS STEEL
A choice stainless steel ideal for aggressive environments where combustion emissions can cause serious chemical corrosion on other types of metal

EXHAUST FINISH - POLISHED
Mirror finishes are highly reflective and created by polishing the stainless steel. The polishing process enhances appearance and consistency, making cleaning easier. A special rolling procedure is used. It is essential to remove deep scratches as any surface defects will be very noticeable on the finished product. it improves corrosion resistance. The polishing eradicates crevices where corrosive particles can lodge themselves.

MAIN PIPE DIMENSION 65mm
This is the diameter of the main pipe of the exhaust system

Please note: sports catalytic converters or bypass pipes do have type approval and may not be legally installed on vehicles manufactured after 1^st March 2001. They can not be used on a public road and are not MOT compliant, they are designed for race and track cars only. 

Sports exhaust silencer with catalytic converter delete pipes
Porsche 997.2 turbo and turbo S 2010-2013



Fits
Porsche 911 turbo 997 Gen 2
Porsche 911 turbo S 997 Gen 2

The component is perfectly interchangeable with the original components, following the instructions in the constructor's workshop manual

RACETRACK USE ONLY
These components are designed and developed for racetrack use and to maximise the car's performance. They are not street legal and must be installed by professionals in the sector

CATALYTIC CONVERTER REMOVAL
This reduces exhaust back pressure while still maintaining the operation of the catalytic converter, and improves performance and sound

ECU REMAPPING - FOR PERFORMANCE
On turbo cars, catalytic converter replacement may modify turbocharger operating conditions and cause a deterioration of the torque delivery curve. To ensure full benefit from the new racing component, the engine's ECU must be reprogrammed to maximise performance. If the engine warning light comes on, the ECU must always be reprogrammed to eliminate it

SOUND - TUBI SOUND
Tubi Sound is the standard sound of Tubi Style exhausts, louder and more powerful than the original sound. This sound represents our brand

END TIPS DESIGN - OE
The muffler must be used in conjunction with the original exhaust end tips

END TIPS NUMBER AND POSITION - 1 + 1 AT THE SIDES
The tailpipes are located low down at the sides of the car. There is one tailpipe at each side

MATERIAL - AISI 304 STAINLESS STEEL
A choice stainless steel ideal for aggressive environments where combustion emissions can cause serious chemical corrosion on other types of metal

EXHAUST FINISH - POLISHED
Mirror finishes are highly reflective and created by polishing the stainless steel. The polishing process enhances appearance and consistency, making cleaning easier. A special rolling procedure is used. It is essential to remove deep scratches as any surface defects will be very noticeable on the finished product. it improves corrosion resistance. The polishing eradicates crevices where corrosive particles can lodge themselves.

MAIN PIPE DIMENSION 65mm
This is the diameter of the main pipe of the exhaust system

Please note: sports catalytic converters or bypass pipes do have type approval and may not be legally installed on vehicles manufactured after 1^st March 2001. They can not be used on a public road and are not MOT compliant, they are designed for race and track cars only. 

Sports exhaust manifolds - polished
Porsche 997 Gen 1 turbo and turbo S



Fits
Porsche 911 turbo (997 Gen 1)
Porsche 911 turbo S (997 Gen 1)

The component is perfectly interchangeable with the original components, following the instructions in the constructor's workshop manual

RACETRACK USE ONLY
These components are designed and developed for racetrack use and to maximise the car's performance. They are not street legal and must be installed by professionals in the sector

ECU REMAPPING - ENGINE LIGHT
Replacement or removal of components such as catalytic converters, GPFs and electric actuators may cause the engine warning light to come on. In this case, the installer must reprogram the software to eliminate the light

MATERIAL - AISI 304 STAINLESS STEEL
A choice stainless steel ideal for aggressive environments where combustion emissions can cause serious chemical corrosion on other types of metal

MAIN PIPE DIMENSION 60mm
This is the diameter of the main pipe of the exhaust system

HEAT SHIELDING - INSULATED
Tubi Style ensures maximum protection for components in critical and dangerous positions by using insulation made with the same technology employed by car manufacturers