瑞格斯

Side Intake Grilles.



Fits:
Porsche 981 Cayman / Cayman S 2014-2016
Porsche 981 Boxster / Boxster S 2012-2016
Porsche 981 Spyder
Porsche 981 Boxster / Cayman GTS
Porsche 981 GT4

These s ide Intake Grilles (left and right) protect your intakes from leaves and other debris.

Grilles are powder coated black

No tools to install except for basic hand tools for the trim removal.

Note: does not include the actual grille surround shown in the photo, only the mesh material

Side Intake Grilles.



Fits:
Porsche 987 Cayman Gen 1 and Gen 2 2006-2012
Porsche 987 Cayman S Gen 1 and Gen 2 2006-2012

These s ide Intake Grilles (left and right) protect your intakes from leaves and other debris.

Grilles are powder coated black



No tools to install except for basic hand tools for the trim removal.

Note: does not include the actual grille surround shown in the photo, only the mesh material

侧进气格栅。



適用於:
保时捷 987 第一代 Boxster 2005-08
保时捷 987 第一代 Boxster S 2005-08
保时捷 987 第二代 Boxster 2009-12
保时捷 987 第二代 Boxster S 2009-12

这些侧进气格栅（左和右）可保护您的进气口免受树叶和其他碎片的侵害。

格栅采用黑色粉末涂层

除用于拆卸装饰物的基本手动工具外，无需安装任何工具。

注意：不包括照片中显示的实际格栅环绕，仅包括网状材料

Front bumper side grille wire mesh kit.



Fits:
Porsche 987 Gen 1 Boxster 2005-2008
Porsche 987 Gen 1 Boxster S 2005-2008

These metal mesh grilles (left and right) will help protect your 987 Porsche Boxster and Boxster S Bumper Side Radiators from road and track debris.

Grilles are powder coated black

Easy install with OEM look and no bumper removal required for installation and no permanent modifications. Fixing cable ties can be painted with touch up paint to completely hide them

For Installation instructions please CLICK HERE

Front bumper side grille wire mesh kit.



Fits:
Porsche 987 Gen 1 Cayman 2005-2008
Porsche 987 Gen 1 Cayman S 2005-2008

These metal mesh grilles (left and right) will help protect your 987 Porsche Cayman and Cayman S Bumper Side Radiators from road and track debris.

Grilles are powder coated black

Easy install with OEM look and no bumper removal required for installation

For Installation instructions please CLICK HERE

Front bumper side grille wire mesh kit.



Fits:
Porsche 986 Boxster and Boxster S 2003-2004

These metal mesh grilles (left and right) will help protect your 986 Porsche Boxster and Boxster S Bumper Side Radiators from road and track debris.

Easy install with OEM look and no bumper removal required for installation

Grilles are powder coated black

These fit the Boxster S models with the third radiator and the smaller radiator grill openings (approximately 11 inch opening, please check before ordering) than the earlier Boxsters

For Installation instructions please CLICK HERE

Front bumper centre grille wire mesh.



Fits:
Porsche 997 Gen 1 Carrera 2/4 2005-2008
Porsche 997 Gen 1 Carrera S 2005-2008
Porsche 997 Gen 1 Carrera 4S 2005-2008

Fitting requires double sided tape

Protect that big intake on the 997 Gen 1 or add that aggressive looks and match the RGS side radiator grilles for cars without the third radiator.

Grilles are powder coated black

Protect your Porsche 911 vulnerable, low front radiators from road and track debris.
No bumper removal

Front bumper grille wire mesh set.
Consists of centre grill and both outer grills



Fits:
Porsche 997 Gen 1 Carrera 2 2005 - 2008
Porsche 997 Gen 1 Carrera 4 2005 - 2008
Porsche 997 Gen 1 Carrera 2S 2005 - 2008
Porsche 997 Gen 1 Carrera 4S 2005 - 2008

Protect your 997 Gen 1 911 front radiators from rocks and leaf debris that can damage and corrode your expensive coolant system.

This is a three piece kit to protect the left, right and centre radiators.

Black powder coating creates an OEM look while protecting your car and are easy install

Front bumper side grille wire mesh kit.



Fits:
Porsche 997 Gen 1 Carrera 2 2005 - 2008
Porsche 997 Gen 1 Carrera 4 2005 - 2008
Porsche 997 Gen 1 Carrera 2S 2005 - 2008
Porsche 997 Gen 1 Carrera 4S 2005 - 2008

Protect your 997 Gen 1 911 front radiator from rocks and leaf debris that can damage and corrode your expensive coolant system and radiators.

This is a two piece kit to protect the left and right radiators.

Black powder coating creates an OEM look while protecting your car and are easy install

包括两个外部（散热器）格栅，采用黑色粉末涂层处理，具有 OEM 外观。



保护您的 997 Gen 2 GTS 前散热器免受岩石和树叶碎片的侵害，这些碎片可能会损坏和腐蚀您昂贵的冷却液系统和散热器，而无需拆卸前保险杠。

適用於:
保时捷 997 Gen 2 GTS
保时捷 997 Gen 2 Carrera 2 / 4 / S / 4S 2009-12 - 仅适用于配备前部 Aerokit 保险杠的车辆

997.2 GTS / Carrera 车型前保险杠中央格栅。



保护 997 Gen 2 上的大型进气口或增加攻击性外观，并为没有第三个散热器的汽车搭配 RGS 侧散热器格栅。无需拆卸前保险杠即可安装此格栅。

適用於:
保时捷 997 第二代卡雷拉 2 / 4 / S / 4S 2009-12
保时捷 997 Gen 2 GTS 2009-12

安装需要双面胶带

格栅采用黑色粉末涂层

包括两个外部（散热器）格栅，采用黑色粉末涂层处理，具有 OEM 外观。



保护您的 997 Gen 2 前散热器免受岩石和树叶碎片的侵害，这些碎片可能会损坏和腐蚀您昂贵的冷却液系统和散热器，而无需拆卸前保险杠。

適用於:
保时捷 997 第二代 Carrera 2 / 4 / S / 4S 2009 - 2012

*请注意，此套件不适用于配备 Aerokit 前保险杠的车辆。请使用 997.2GTSFRONT。

Front bumper side grille wire mesh kit.



Fits:
Porsche 996 C4S
Porsche 996 turbo

Protect your turbo and C4S vehicles from track and leaf debris.
These REQUIRE bumper removal to install They install quickly with cable ties, no screwing into the bumper and are easily reversible. Black powder coated aluminum grilles.

Black powder coating creates an OEM look while protecting your car and are easy install

Front bumper side grille wire mesh kit.



Fits:
Gen 2 Porsche 996 Carrera 2 2002 - 2005
Gen 2 Porsche 996 Carrera 4 2002 - 2005

Protect your 996 Gen 2 911 front radiator from rocks and leaf debris that can damage and corrode your expensive coolant system and radiators.

This is a two piece kit to protect the left and right radiators.

Black powder coating creates an OEM look while protecting your car and are easy install

Front bumper side grille wire mesh kit.



Fits:
Gen 1 Porsche 996 1998 - 2001

Protect your 996 Gen 1 911 front radiator from rocks and leaf debris that can damage and corrode your expensive coolant system and radiators.

Grilles are powder coated black

Please check out the Porsche 996.1 Radiator Grille Installation Instructions here:

This is a two piece kit to protect the left and right radiators.

前保险杠中央格栅金属网。



適用於:
保时捷 991.1 2012-2016

安装需要双面胶带

保护 991.1 上的大进气口或增添其侵略性外观，并为没有第三个散热器的汽车匹配 RGS 侧散热器格栅。

让您的 911 991.1 拥有 GT3 工厂外观，并保护您的保时捷 911 脆弱的低前散热器免受道路和轨道碎片的伤害。
无需拆除保险杠

这些不适合 991 GTS 或 Aerokit 碰碰车

格栅采用黑色粉末涂层

请观看下面的视频，了解保时捷 911 991.1（2012-2016）中央散热器格栅的安装说明，981 Cayman 上采用了相同的技术。



相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

991.1CTR

您正在查看的产品与这些编号存在交叉引用关系