复古线

发动机线束束线器。

适合:
保时捷 964 Carrera 2 / Carrera 4 手册 - 1991 年至 1994 年
发动机代码 M64.01 和 M64.03

964 Carrera 2 / Carrera 4 的完整发动机线束

请注意，12 极公头的底盘部件和盖子不再是新的，需要从原始线束中重新使用（包括 2 分钟工作说明）

特殊订单定制零件请预留 2 - 4 周

图表参考编号 1

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

96460701603

您正在查看的产品与这些编号存在交叉引用关系

发动机线束束线器。

适合:
保时捷 964 Carrera 2 Tiptronic - 1991 至 1994
发动机代码 M64.02

964 Carrera Tiptronic 的完整发动机线束。

请注意，12 极公头的底盘部件和盖子不再是新的，需要从原始线束中重新使用（包括 2 分钟工作说明）

特殊订单定制零件请预留 2 - 4 周

图表参考编号 1

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

96460701602

您正在查看的产品与这些编号存在交叉引用关系

发动机线束束线器。

#复古线#

适合:
保时捷 964 Carrera 4 - 1989 年至 1990 年
发动机代码 M64.01

适用于 1989 -1990 年款 964 Carrera 4 的完整发动机线束

请注意 12 极公头的底盘部件和盖子不再有新品，需要从原始线束中重新使用（包含 2 分钟工作说明）

特殊订单定制零件请预留 2 - 4 周

单击“放大”可查看大部件图。
图表参考编号 1

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

96460701601

您正在查看的产品与这些编号存在交叉引用关系

DME wiring harness.



Fits:
Porsche 964 Carrera 2 tiptronic (M249) up to 1991

DME harness for 964 Complete harness with 55PIN ECU/DME connector to Motronic Box


Connectors for:

• T16
• Version coding
• Coding plug
• Oxygen sensor
• Pressure sensor
• Air flow sensor
• Throttle valve switch
• Idle speed sensor
• Resonance plate
• Tank vent valve
• Knock sensor 1
• Knock sensor 2
• NTC temp sensor
• Speed sender
• Ignition coil 1
• Ignition coil 2
• Ignition control unit 1
• Ignition control unit 2
• T31 connection
• Timing belt switch
• Hall sender

Special order made to order parts please allow 2 – 4 weeks

Comes with detailed connection diagram.

Loom is made to order

Click 'Zoom in' for large parts diagram.
Diagram ref no 2

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

96461217303

您正在查看的产品与这些编号存在交叉引用关系

防石屑保护套件 黑色保时捷 Boxster 986 / 987 Boxster / Cayman



适合后下 1/4 面板

适合
保时捷 986 Boxster
保时捷 987 Boxster / Cayman

2 个部分
左 & 右 - 纹理黑色

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

SG986B

您正在查看的产品与这些编号存在交叉引用关系

碎石防护装置 - 透明。保时捷 996 turbo

适合后下 1/4 面板



适合 - 宽体车
保时捷 996 涡轮增压

2 个部分
左 & 右

碎石防护装置 - 黑色。保时捷 996 Turbo

适合后下 1/4 面板



适合 - 宽体车
保时捷 996 涡轮增压

2 个部分
左 & 右 - 纹理黑色

碎石防护装置 - 透明。保时捷 996 Carrera 4S

适合后下 1/4 面板



适合 - 宽体车
保时捷 996 Carrera 4S

2 个部分
左 & 右

碎石防护装置 - 黑色。保时捷 996 Carrera 4S

适合后下 1/4 面板



适合 - 宽体车
保时捷 996 Carrera 4S

2 个部分
左 & 右 - 纹理黑色

碎石防护装置 - 透明。保时捷 996 Carrera / Carrera 4

适合后下 1/4 面板



适合 - 窄体车
保时捷 996 Carrera
保时捷 996 Carrera 4

2 个部分
左 & 右

碎石防护装置 - 黑色。保时捷 996 Carrera / Carrera 4

适合后下 1/4 面板



适合 - 窄体车
保时捷 996 Carrera
保时捷 996 Carrera 4

2 个部分
左 & 右 - 纹理黑色

Cup / drinks holder. Side mount



Fits
Fits 718 Boxster, 718 Cayman, 718 Spyder, 911, Boxster, Cayman.

** Any Porsche with this centre console design will fit ** (some may be missing from below, I will update as best I can)

Porsche 991 ALL
Porsche 718 ALL
Porsche 981 ALL
Porsche 911 ALL 2011+
Porsche Boxster ALL 2013+
Porsche Cayman ALL 2014+

I'm a fan of the fold out cup holders but if you've had any amount of seat time with a drink in the car then you'll know drinks move and spill on your HVAC buttons. This commonly makes your fan/temp controls sticky and sometimes non responsive. With the 992 911 2020+ interior update some cars have a cup holder in the centre console where a small ashtray or cubby is on all previous 911s and current Caymans. This is a custom made cupholder to utilize un-used space in the car and add an additional convenience to your experience to all other makes and models. Visually the goal is to offer a piece that does not deviate from the OEM look of the car while adding function.

Package Includes: 1x Cup holder. 1x Side Bracket. 1x Cup Bracket. Satin Black. Plug and play. 5-15 min install time.

Fitment: 2011 - 2022 all two door Porsche cars with the ashtray/cubby in front of the armrest. YETI, Blender bottles, and larger size tumblers fit great.

Plug & Play: Minimal to no tools required. Pull on the centre console passenger side cover. Slip the side bracket in. It will slide into place and you will feel it lock into the casting behind the side cover. Screw the cup bracket into the side bracket. Slide cup onto the bracket.




Note
These are 3d printed parts. There will be support marks and small/minor blemishes on some surfaces. We post treat these as best we can to match the OEM look and feel. The pictures above represent exactly what you should expect.

保时捷 964 / 993 仪表盘上的MPH液晶显示屏替换件



此 LCD 面板适用于配备 M659 车载电脑的汽车的转速表 LCD 面板只能由专业人员安装

适合：
保时捷 964 1989-94
保时捷 993 1994-98

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

993641312XX

您正在查看的产品与这些编号存在交叉引用关系

Centre console cup / drinks holder. Low Profile Edition



Fits
Porsche 991.1 - All
Porsche 991.2 - All
Porsche 981 Boxster - All
Porsche 981 Cayman - All
Porsche 718 Boxster - All
Porsche 718 Cayman - All

Available Versions
• Standard Edition
• Low Profile Edition
• Phone Holder Edition - Additional slot is added to fit your phone

If you've had any amount of seat time with a drink in the car then you'll know drinks move and spill on your HVAC buttons.
This commonly makes your fan/temp controls sticky and sometimes non responsive. With the 992 911 2020+ interior update some cars have a cup holder in the centre console where a small ashtray or cubby is on all previous 911s and current Caymans.

This is a custom made cup holder to mimic the location of the 992 ones to add additional convenience
Visually the goal is to offer a piece that does not deviate from the OEM look of the car while adding function.

Package Includes: 1x Cup holder. Satin Black (Matching black to centre console)

Plug and play. 5 min install time

Fitment:
2011 - 2022 all two door Porsche cars with the ashtray/cubby in front of the armrest. 2 3/4 Cup size. This is going to fit everything the slide out cup holder could. Additionally, with this design you can add on a "Cup holder extender" that will sit higher and larger to fit your YETI, Blender bottles, and larger size tumblers should you like.

Plug & Play:
No tools required. Remove trim ring by pulling up. Remove button cluster by pulling up. Slide OEM ashtray forward and up. Install your new cup holder. Re-install the cluster and trim ring.

Direct replacement for Part Number: 99155314300A05
Supersession(s): 991-553-143-00-A05

Some 911's have a cigarette/charger port in the ashtray area (Smokers Package). This cup holder will fit the same. The charging port can be relocated or deleted.

Note
These are 3d printed parts. There will be support marks and small/minor blemishes on some surfaces. We post treat these as best we can to match the OEM look and feel. The pictures above represent exactly what you should expect.

Centre console cup / drinks holder. Phone Holder Edition - Additional slot is added to fit your phone



Fits
Porsche 991.1 - All
Porsche 991.2 - All
Porsche 981 Boxster - All
Porsche 981 Cayman - All
Porsche 718 Boxster - All
Porsche 718 Cayman - All

Available Versions
• Standard Edition
• Low Profile Edition
• Phone Holder Edition - Additional slot is added to fit your phone

If you've had any amount of seat time with a drink in the car then you'll know drinks move and spill on your HVAC buttons.
This commonly makes your fan/temp controls sticky and sometimes non responsive. With the 992 911 2020+ interior update some cars have a cup holder in the centre console where a small ashtray or cubby is on all previous 911s and current Caymans.

This is a custom made cup holder to mimic the location of the 992 ones to add additional convenience
Visually the goal is to offer a piece that does not deviate from the OEM look of the car while adding function.

Package Includes: 1x Cup holder. Satin Black (Matching black to centre console)

Plug and play. 5 min install time

Fitment:
2011 - 2022 all two door Porsche cars with the ashtray/cubby in front of the armrest. 2 3/4 Cup size. This is going to fit everything the slide out cup holder could. Additionally, with this design you can add on a "Cup holder extender" that will sit higher and larger to fit your YETI, Blender bottles, and larger size tumblers should you like.

Plug & Play:
No tools required. Remove trim ring by pulling up. Remove button cluster by pulling up. Slide OEM ashtray forward and up. Install your new cup holder. Re-install the cluster and trim ring.

Direct replacement for Part Number: 99155314300A05
Supersession(s): 991-553-143-00-A05

Some 911's have a cigarette/charger port in the ashtray area (Smokers Package). This cup holder will fit the same. The charging port can be relocated or deleted.

Note
These are 3d printed parts. There will be support marks and small/minor blemishes on some surfaces. We post treat these as best we can to match the OEM look and feel. The pictures above represent exactly what you should expect.

Centre console cup / drinks holder, Standard Edition



Fits
Porsche 991.1 - All
Porsche 991.2 - All
Porsche 981 Boxster - All
Porsche 981 Cayman - All
Porsche 718 Boxster - All
Porsche 718 Cayman - All

Available Versions
• Standard Edition
• Low Profile Edition
• Phone Holder Edition - Additional slot is added to fit your phone

If you've had any amount of seat time with a drink in the car then you'll know drinks move and spill on your HVAC buttons.
This commonly makes your fan/temp controls sticky and sometimes non responsive. With the 992 911 2020+ interior update some cars have a cup holder in the centre console where a small ashtray or cubby is on all previous 911s and current Caymans.

This is a custom made cup holder to mimic the location of the 992 ones to add additional convenience
Visually the goal is to offer a piece that does not deviate from the OEM look of the car while adding function.

Package Includes: 1x Cup holder. Satin Black (Matching black to centre console)

Plug and play. 5 min install time

Fitment:
2011 - 2022 all two door Porsche cars with the ashtray/cubby in front of the armrest. 2 3/4 Cup size. This is going to fit everything the slide out cup holder could. Additionally, with this design you can add on a "Cup holder extender" that will sit higher and larger to fit your YETI, Blender bottles, and larger size tumblers should you like.

Plug & Play:
No tools required. Remove trim ring by pulling up. Remove button cluster by pulling up. Slide OEM ashtray forward and up. Install your new cup holder. Re-install the cluster and trim ring.

Direct replacement for Part Number: 99155314300A05
Supersession(s): 991-553-143-00-A05

Some 911's have a cigarette/charger port in the ashtray area (Smokers Package). This cup holder will fit the same. The charging port can be relocated or deleted.

Note
These are 3d printed parts. There will be support marks and small/minor blemishes on some surfaces. We post treat these as best we can to match the OEM look and feel. The pictures above represent exactly what you should expect.