已种植

Planted seat bracket.



Fits:
Chevrolet Corvette (C5 Chassis) (1997-2004)

Planted Offset Universal Side Mount- BLACK



The Planted Steel Offset Universal Side Mount is made from 1/8th inch thick steel which complies with FIA's required thickness, weighs approximately 6 lbs, and powder coated black. These will fit Side Mount Seats offered by: OMP, Cobra, Status, Racetech, Sparco, Recaro & Bride for sure and will most likely fit most other seat manufacturers but have not been test fitted. In most cases you'll want to use the 90 Degree Universal Side Mount. However, when installing a seat that is the same width as the holes you wish to mount to you'll want to use the Offset Side Mount because a 90 degree side mount will not allow you to install the bolts. An example would be when installing a Recaro slider, which is 16 inches wide, with a side mount seat that is also 16 inches wide. The vertical part of the 90 Degree Side Mount will actually block the holes and not allow you to install the nuts and bolt to hold down your seat. In this case you will definitely want to use the Offset Side Mount. The Side Mounts are made to bolt directly to sliders but have multiple slots for adjustability when direct mounting (eliminating sliders). Price listed is for Side Mounts for one seat.

These sports seats are manufactured for all makes and models.
Due to the universal nature of this product some modification or
alteration maybe required to the seat or car to ensure correct fitting

Planted 90 Degree Universal Sidemount - BLACK



The Planted Universal Side Mount is made from 1/8th inch thick steel which complies with FIA's required thickness, weighs approximately 5 lbs and is powder coated black. These will fit Side Mount Seats offered by: OMP, Cobra, Status, Racetech, Sparco, Recaro & Bride for sure and will most likely fit most other seat manufacturers but have not been test fitted. The Side Mounts are made to bolt directly to sliders but have multiple slots for adjustability when direct mounting (eliminating sliders). 

These sports seats are manufactured for all makes and models.
Due to the universal nature of this product some modification or
alteration maybe required to the seat or car to ensure correct fitting

Planted Aluminium Offset Universal Side Mount - GREY



The Planted Aluminium Offset Universal Side Mount is made from 1/4th inch thick aluminium to comply with FIA's 13/64 inch minimum, weighs approximately 3.5 lbs, and powder coated grey. These will fit Side Mount Seats offered by: OMP, Cobra, Status, Racetech, Sparco, Recaro & Bride for sure and will most likely fit most other seat manufacturers but have not been test fitted. In most cases you'll want to use the 90 Degree Universal Side Mount. However, when
installing a seat that is the same width as the holes you wish to mount to you'll want to use the Offset Side Mount because a 90 degree side mount will not allow you to install the bolts.
An example would be when installing a Recaro slider, which is 16 inches wide, with a side mount seat that is also 16 inches wide. The vertical part of the 90 Degree Side Mount will actually block the holes and not allow you to install the nuts and bolt to hold down your seat. In this case you will definitely want to use the Offset Side Mount.

The Side Mounts are made to bolt directly to sliders but have multiple slots for adjustability when direct mounting (eliminating sliders). Price listed is for Side Mounts for one seat.

These sports seats are manufactured for all makes and models.
Due to the universal nature of this product some modification or
alteration maybe required to the seat or car to ensure correct fitting

Planted Aluminium 90 Degree Universal Sidemount - GREY



The Planted Aluminium 90 Degree Universal Side Mount is made from 1/4th inch thick aluminium to comply with FIA's 13/64 inch minimum, weighs approximately 3 lbs, and powder coated grey. These will fit Side Mount Seats offered by: OMP, Cobra, Status, Racetech, Sparco, Recaro & Bride for sure and will most likely fit most other seat manufacturers but have not been test fitted. The Side Mounts are made to bolt directly to sliders but have multiple slots for adjustability when direct mounting (eliminating sliders). Price listed is for Side Mounts for one seat.

种植座椅地板支架。

适合:
保时捷 996
保时捷 Boxster
保时捷 997
保时捷卡曼
保时捷 991

植绒座椅支架采用 3/16 英寸厚的钢材制成，强度更高。它可兼容大多数主流座椅制造商的滑轨，例如 Bride、Cipher Auto、Cobra、Corbeau、Momo、OMP、Racetech、Recaro、Sparco、Status 等。如果希望省去滑轨，则可提供额外的材料，用于直接安装座椅或侧装。支架表面采用黑色粉末涂层，适用于大多数车型。

这些运动座椅适用于所有品牌和型号。
由于该产品的通用性，一些修改或
可能需要对座椅或汽车进行改动以确保正确安装

Planted floor seat bracket.
Fits LEFT or RIGHT side.



Fits:
Porsche 911/912 (1966-1973)

The Planted Seat Bracket is made with 3/16" thick steel for superior strength. It is built to accept sliders from most major seat manufacturers like Bride, Cipher Auto, Cobra, Corbeau, Momo, OMP, Racetech, Recaro, Sparco, Status & more. Extra material is provided for direct seat or side mount applications where eliminating sliders is preferred. They are finished with a black powder coat and applications are available for most cars.

These sports seats are manufactured for all makes and models.
Due to the universal nature of this product some modification or
alteration maybe required to the seat or car to ensure correct fitting

Planted floor seat bracket.



Fits:
Porsche 911 1974-89
Porsche 964
Porsche 993
Porsche 944
Porsche 928
Porsche 968
Porsche 924S

The Planted Seat Bracket is made with 3/16" thick steel for superior strength. It is built to accept sliders from most major seat manufacturers like Bride, Cipher Auto, Cobra, Corbeau, Momo, OMP, Racetech, Recaro, Sparco, Status & more. Extra material is provided for direct seat or side mount applications where eliminating sliders is preferred. They are finished with a black powder coat and applications are available for most cars.

These sports seats are manufactured for all makes and models.
Due to the universal nature of this product some modification or
alteration maybe required to the seat or car to ensure correct fitting