马格内科

Ignition HT lead set, 7mm Electrosports. 



Fits:
Porsche 993 turbo  - 1994 to 1996

Ignition HT lead set for an unmodified engine with the coil in its original location.
Set comes with 6 x HT leads and 1 x coil lead (king lead) 
Coil lead is 7.75 inches long - Please check original item.
HT lead set comes in black 

SAE / Post / Male fittings on distributor, conventional DIN fitting on the coil. Only to be used with original type coil.

Magnecor Electrosports 7mm HT leads

Hand-assembled by our highly trained production staff, Magnecor leads are covered by a 10 year guarantee which ensures long lasting reliability and service life.
Magnecor’s Exclusive Metallic Inductance Suppressed Conductor will outlast the life of any engine as Magnecor lead sets are not manufactured just to be a service item. To further improve reliability some Magnecor leads use different connectors to overcome problems associated with the original set you are replacing and this is particularly important if your vehicle is used for competition. Stainless steel snap-lock terminals are used for spark plug ends and phosphor-bronze, brass or stainless steel terminals for distributor/coil ends. 

Leads are individually numbered for ease of installation

Whatever the application – motorsport, performance or family motoring, your engine’s performance will always benefit from a set of Magnecor ignition leads.

• Direct replacement for 7mm original equipment carbon conductor leads with excellent RFI (radio frequency) and EMI (electro magnetic) suppression. 
• Overcomes problems associated with limited-life carbon conductors and poorly suppressed aftermarket spiral conductor leads on modern engines. 
• Extreme strength, high temperature resistant silicone rubber jacket and high dielectric strength internal silicone insulator bonded by tape to outer jacket for superior terminal retention.

Leads are Special Order. Please allow 2-3 weeks for delivery

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

67186

您正在查看的产品与这些编号存在交叉引用关系

Ignition HT lead set, 7mm Electrosports. 

Fits:
Porsche 964 turbo 3.6ltr - M64.50 engine code

Ignition HT lead set for an unmodified engine with the coil in its original location.
Set comes with 6 x HT leads and 1 x coil lead (king lead) 
Coil lead is 5.5 inches long - Please check original item.
HT lead set comes in black 

SAE / Post / Male fittings on distributor, conventional DIN fitting on the coil. Only to be used with original type coil.

Magnecor Electrosports 7mm HT leads

Hand-assembled by our highly trained production staff, Magnecor leads are covered by a 10 year guarantee which ensures long lasting reliability and service life.
Magnecor’s Exclusive Metallic Inductance Suppressed Conductor will outlast the life of any engine as Magnecor lead sets are not manufactured just to be a service item. To further improve reliability some Magnecor leads use different connectors to overcome problems associated with the original set you are replacing and this is particularly important if your vehicle is used for competition. Stainless steel snap-lock terminals are used for spark plug ends and phosphor-bronze, brass or stainless steel terminals for distributor/coil ends. 

Leads are individually numbered for ease of installation

Whatever the application – motorsport, performance or family motoring, your engine’s performance will always benefit from a set of Magnecor ignition leads.

• Direct replacement for 7mm original equipment carbon conductor leads with excellent RFI (radio frequency) and EMI (electro magnetic) suppression. 
• Overcomes problems associated with limited-life carbon conductors and poorly suppressed aftermarket spiral conductor leads on modern engines. 
• Extreme strength, high temperature resistant silicone rubber jacket and high dielectric strength internal silicone insulator bonded by tape to outer jacket for superior terminal retention.

Leads are Special Order. Please allow 2-3 weeks for delivery

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

6766

您正在查看的产品与这些编号存在交叉引用关系

Ignition HT lead set, 7mm Electrosports. 

Fits:
Porsche 964 turbo 3.3ltr - M30.69 engine code

Ignition HT lead set for an unmodified engine with the coil in its original location.
Set comes with 6 x HT leads and 1 x coil lead (king lead) 
Coil lead is 5.5 inches long - Please check original item.
HT lead set comes in black 

SAE / Post / Male fittings on distributor, conventional DIN fitting on the coil. Only to be used with original type coil.

Magnecor Electrosports 7mm HT leads
Hand-assembled by our highly trained production staff, Magnecor leads are covered by a 10 year guarantee which ensures long lasting reliability and service life. 
Magnecor’s Exclusive Metallic Inductance Suppressed Conductor will outlast the life of any engine as Magnecor lead sets are not manufactured just to be a service item. To further improve reliability some Magnecor leads use different connectors to overcome problems associated with the original set you are replacing and this is particularly important if your vehicle is used for competition. Stainless steel snap-lock terminals are used for spark plug ends and phosphor-bronze, brass or stainless steel terminals for distributor/coil ends. 

Leads are individually numbered for ease of installation

Whatever the application – motorsport, performance or family motoring, your engine’s performance will always benefit from a set of Magnecor ignition leads.

• Direct replacement for 7mm original equipment carbon conductor leads with excellent RFI (radio frequency) and EMI (electro magnetic) suppression. 
• Overcomes problems associated with limited-life carbon conductors and poorly suppressed aftermarket spiral conductor leads on modern engines. 
• Extreme strength, high temperature resistant silicone rubber jacket and high dielectric strength internal silicone insulator bonded by tape to outer jacket for superior terminal retention.

Leads are Special Order. Please allow 2-3 weeks for delivery

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

67185

您正在查看的产品与这些编号存在交叉引用关系

Ignition HT lead set, 7mm Electrosports. 

Fits:
Porsche 911 SC 3.0ltr - 1978 to 1983
Porsche 911 turbo 3.0ltr - 1975 to 1977
Porsche 911 turbo 3.3ltr - 1978 to 1989
For cars with K-Jetronic fuel injection only

Ignition HT lead set for an unmodified engine with the coil in its original location.
Set comes with 6 x HT leads and 1 x coil lead (king lead) 
Coil lead is 9.5 inches long - Please check original item.
HT lead set comes in black 

Conventional DIN fitting on the coil. Only to be used with original type coil

Magnecor Electrosports 7mm HT leads
Hand-assembled by our highly trained production staff, Magnecor leads are covered by a 10 year guarantee which ensures long lasting reliability and service life. 
Magnecor’s Exclusive Metallic Inductance Suppressed Conductor will outlast the life of any engine as Magnecor lead sets are not manufactured just to be a service item. To further improve reliability some Magnecor leads use different connectors to overcome problems associated with the original set you are replacing and this is particularly important if your vehicle is used for competition. Stainless steel snap-lock terminals are used for spark plug ends and phosphor-bronze, brass or stainless steel terminals for distributor/coil ends. 

Leads are individually numbered for ease of installation

Whatever the application – motorsport, performance or family motoring, your engine’s performance will always benefit from a set of Magnecor ignition leads.

• Direct replacement for 7mm original equipment carbon conductor leads with excellent RFI (radio frequency) and EMI (electro magnetic) suppression. 
• Overcomes problems associated with limited-life carbon conductors and poorly suppressed aftermarket spiral conductor leads on modern engines. 
• Extreme strength, high temperature resistant silicone rubber jacket and high dielectric strength internal silicone insulator bonded by tape to outer jacket for superior terminal retention.

Leads are Special Order. Please allow 2-3 weeks for delivery

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

6704

您正在查看的产品与这些编号存在交叉引用关系

Ignition HT lead set, 7mm Electrosports. 



Fits:

Porsche 911 3.2 Carrera - 1984 to 1989

Ignition HT lead set for an unmodified engine with the coil in its original location. 
Set comes with 6 x HT leads and 1 x coil lead (king lead)
Coil lead (king lead) is 21.5 inches long - Please check original item. 
HT lead set comes in black 

SAE / Post / Male fittings on distributor, conventional DIN fitting on the coil. Only to be used with original type coil

Magnecor Electrosports 7mm HT leads
Hand-assembled by our highly trained production staff, Magnecor leads are covered by a 10 year guarantee which ensures long lasting reliability and service life. 
Magnecor’s Exclusive Metallic Inductance Suppressed Conductor will outlast the life of any engine as Magnecor lead sets are not manufactured just to be a service item. To further improve reliability some Magnecor leads use different connectors to overcome problems associated with the original set you are replacing and this is particularly important if your vehicle is used for competition. Stainless steel snap-lock terminals are used for spark plug ends and phosphor-bronze, brass or stainless steel terminals for distributor/coil ends. 

Leads are individually numbered for ease of installation

Whatever the application – motorsport, performance or family motoring, your engine’s performance will always benefit from a set of Magnecor ignition leads.

• Direct replacement for 7mm original equipment carbon conductor leads with excellent RFI (radio frequency) and EMI (electro magnetic) suppression. 
• Overcomes problems associated with limited-life carbon conductors and poorly suppressed aftermarket spiral conductor leads on modern engines. 
• Extreme strength, high temperature resistant silicone rubber jacket and high dielectric strength internal silicone insulator bonded by tape to outer jacket for superior terminal retention.on HT lead set, 7mm Electrosports. 

Leads are Special Order. Please allow 2-3 weeks for delivery

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

6714

您正在查看的产品与这些编号存在交叉引用关系

Ignition HT lead set, 7mm Electrosports

Fits:
Porsche 911 2.0ltr - 1964 to 1968

Ignition HT lead set for an unmodified engine with the coil in its original location. 
Set comes with 6 x HT lead and 1 x coil lead (king lead)
Coil lead (king lead) is 20.75 inches long - Please check original item. 
Leads are black

Conventional DIN fitting on the coil. Only to be used with original type coil

Magnecor Electrosports 7mm HT leads
Hand-assembled by our highly trained production staff, Magnecor leads are covered by a 10 year guarantee which ensures long lasting reliability and service life.
Magnecor’s Exclusive Metallic Inductance Suppressed Conductor will outlast the life of any engine as Magnecor lead sets are not manufactured just to be a service item. To further improve reliability some Magnecor leads use different connectors to overcome problems associated with the original set you are replacing and this is particularly important if your vehicle is used for competition. Stainless steel snap-lock terminals are used for spark plug ends and phosphor-bronze, brass or stainless steel terminals for distributor/coil ends. 

Leads are individually numbered for ease of installation.

Whatever the application – motorsport, performance or family motoring, your engine’s performance will always benefit from a set of Magnecor ignition leads.

• Direct replacement for 7mm original equipment carbon conductor leads with excellent RFI (radio frequency) and EMI (electro magnetic) suppression. 
• Overcomes problems associated with limited-life carbon conductors and poorly suppressed aftermarket spiral conductor leads on modern engines. 
• Extreme strength, high temperature resistant silicone rubber jacket and high dielectric strength internal silicone insulator bonded by tape to outer jacket for superior terminal retention.

Leads are Special Order. Please allow 2-3 weeks for delivery

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

6792

您正在查看的产品与这些编号存在交叉引用关系