Cabrio

Convertible top drive cable.



Fits:
Only for cars with dual cable drive motors.
Porsche 911 1986-89 Cabrio
Porsche 964 1989-94 Cabrio
Porsche 993 >>1995 only Cabrio

For 993 1996 onwards you will need 99356192102 and 99356192202

Click 'zoom in' for large parts diagram.
Diagram Ref: 11

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99356192

The product you are viewing cross references to these numbers

A-pillar filler pad.



Fits:
Porsche 964 1989-94
Porsche 993 1995-98

Click 'Zoom in' for large parts diagram.
Diagram ref no 1A

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

96455556300

The product you are viewing cross references to these numbers

Cabrio Pull Handle.



Fits:
Porsche 911 1986-89 CABRIO
Porsche 964 1989-94 CABRIO
Porsche 993 1995-98 CABRIO

Click 'Zoom in' for large parts diagram.
Diagram ref no 27

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91156527

The product you are viewing cross references to these numbers

Replacement convertible hood canvas.

Front & Window Section complete

Fits:
Porsche 993 1994-97

Please note the canvas is available in various colours.

Cabriolet hood (B) pillar seal.



Fits:
Porsche 911 1986-89
Porsche 964 1989-94
Porsche 993 1994-98

Click 'Zoom in' for large parts diagram.
Diagram ref no 6

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99356132

The product you are viewing cross references to these numbers

Cabrio Hood (B)Piller Seal



Fits:
Porsche 911 1986-89
Porsche 964 1989-94
Porsche 993 1994-98

Click 'Zoom in' for large parts diagram.
Diagram ref no 6

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99356132

The product you are viewing cross references to these numbers

Cabriolet hood latch motor cog repair kit.

Fits:
Porsche 911 1987>>
Porsche 964
Porsche 993

For Replacement Instructions CLICK HERE

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91162405603K

The product you are viewing cross references to these numbers

Cabrio Hood Microswitch with Plate.



Fits:
Porsche 944 1989-91
Porsche 964 C2 / C4 1989-94
Porsche 968 1992-95
Porsche 993 C2 / C4 / C2S / C4S

Diagram ref no 12

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91161303701

The product you are viewing cross references to these numbers

Cabrio roof locking motor. Reconditioned unit on exchange basis.


Fits:
Porsche 911 1987-89
Porsche 964 1989-94
Porsche 993 1994-98

Left or right
Please select below

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91162405

The product you are viewing cross references to these numbers

Cabrio Roof Seal Latrual.



Fits:
Porsche 993 1994-98

Click picture for large parts diagram.
Diagram Ref: 2

Hood Tension Cable



Fits:
Porsche 993 1994-97

Click 'Zoom in' for large parts diagram.
Diagram ref no 31

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9935612

The product you are viewing cross references to these numbers

Cabriolet hood to rear motor cable.



Fits:
Porsche 911 1986-89
Porsche 964 1989-94
Porsche 993 >> 1995 only

Click picture for large parts diagram.
Diagram Ref: 11

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99356192

The product you are viewing cross references to these numbers

Complete, new and original cabriolet boot cover for your Porsche 993/ 911 cabriolet from 1994 through 1998. This is a gorgeous, OEM specification Porsche part available in dark blue and black, complete with the original bag.

Our cabriolet boot cover is probably the best you can buy for completeness, originality and fit. We use the original German materials; top grade "Sonnenland Classic" canvas and colour coded edge-binding canvas both from the original supplier, high resistance yarns and all original "Dot" and "Tenax" fasteners and fittings. Even the heavy gauge vinyl and "Velcro" used for the manufacturing the bag exactly match Stüttgart factory specifications. All materials are precision cut, pressure glued, form-stitched and edge bound to guarantee a factory authentic fit.

If you currently drive your Porsche without a boot cover, be aware that you may be damaging your convertible top. These cars were factory delivered with the boot cover to ensure the webbing structure inside the convertible top is protected under high speed, top-down driving. Furthermore, nothing beats the boot cover to accentuate the sex appeal of your curvaceous cabriolet.

To ensure that our boot cover will fit perfectly on both original and replaced soft tops, TENAX fasteners are delivered with the cover but not pre-installed.

Delivery Time is Normally 14 - 21 working days on this product

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

993561100

The product you are viewing cross references to these numbers

Cabriolet hood tonneau cover.



Fits
Porsche 993 Cabriolet - 1994 to 1998

Product information:
Hood cover for covering and protecting the hood when open. The cover has two functions: - The hood cover protects the hood and exposed areas of headliner from dust and UV radiation (fading) while driving. - The hood cover prevents open hood parts from being blown about by the wind or becoming inflated and blocking the view to the rear.

Material:
Sonnenland Classic
Hood cover made of Sonnenland® canvas with separate Tenax fasteners. The fasteners have to be attached after fitting the cover to make sure that it fits properly.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

993561123

The product you are viewing cross references to these numbers

Cabrio Hood Transmission.


Fits:
Porsche 911 1984 >> Cabrio *
Porsche 964 Cabrio
Porsche 993 C2 / C4 >>1995 Cabrio

*For 911 1984-89 the RIGHT hand side transmission will also need part numbers 94461255000 & 94461254800.

This product supersedes the older part numbers 91156104566, 91156104666, 9115610456670B, 9115610466670B, 91156104567, 91156104667, 9115610456770B, 9115610466770B.

Click picture for large parts diagram.
Diagram Ref: 1

Left or Right transmission
Please Select below

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99356104

The product you are viewing cross references to these numbers

Cabriolet hood with sewn-in rear screen.

Rear screen is clear, non-tinted



Fits
Porsche 993 Cabriolet - 1994 to 1998

Headlining need to be reused from old hood or ordered separately.

Material:
Sonnenland Classic
Sonnenland® is a registered trademark for a very high quality canvas made in Germany and used by car manufacturers worldwide for their
original equipment, including Porsche and Mercedes
This is highly UV and abrasion resistant.
The canvas's trademark is a fish bone or criss-cross pattern on its back.
Sonnenland only refers to the material, i.e. yard goods, and not the finished hood

Sonnenland canvases comprise of three layers:



Outer layer: is made of Dralon, which is a woven acrylic fibre (polyacrylonitrile). This fabric is highly UV and abrasion resistant.

Intermediate layer: The intermediate rubber layer comprises of a waterproof synthetic
rubber material. This removes the need for any additional waterproofing. This is why
we do not offer waterproofing products and advise our customers against using any
such products offered on the market.

Inner layer: The backing used to be made of cotton (Sonnenland Classic) and is now
made of polyester

100% waterproof:
We use a kind of thread that has been specially developed for soft tops that swells up when wet and consequently effectively seals the seam holes. All of the seams on the hood are furthermore treated with a fabric seam sealer to ensure that they are 100% waterproof.

No cleaning or waterproofing required:
There will not be any need for expensive cleaning or waterproofing agents. Sonnenland® canvas is a 3-ply material and has a rubber middle layer. The rubber layer keeps water from penetrating through the roof.

Information on the rear window:
Flexible polyglas rear window, with the same thickness (1 mm) as the original, TÜV-certified, permanently sewn-in.
In the original hood, the PVC window was welded to the cloth, which meant that it often came loose. Sewing the window into place has completely solved this issue. The window is made of a clear panel just like the original. The entire window is framed by a sewn-in zip on the inside to which the headliner is connected, just as in the original.

PVC window protection:
The PVC windows for our hoods are protected with our carefully sewn-on window protector and tissue paper during transport and right up until they are fully fitted. This was an intentional move on our part, and is very different from the less expensive fastening options that only involve tape and/or paper. Although this involves more work, it prevents the window protector from moving out of place or coming loose during transport and fitting, and the window from becoming scratched. It also ensures that there will not be any adhesive residues on the hood canvas/window, which are often difficult to remove.

What's included:
Ready-to-fit soft top without frame and seals - which will be reused.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

993561900

The product you are viewing cross references to these numbers