Wiring Harness / Cables

Alternator Ground Strap.

Fits:
Porsche 911 1978-89

Diagram ref no 18

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91161223300

The product you are viewing cross references to these numbers

Alternator Wiring Harness.
Restore reliable power delivery and charging performance with this Porsche 911 Alternator Wiring Harness.
This harness connects the alternator, ignition system, and engine electrical components in your Porsche 911, ensuring accurate current flow and dependable operation.
Whether you’re performing a restoration or replacing aged wiring, this harness guarantees a plug-and-play fit and restores the car’s electrical integrity.

Fits:

• Porsche 911 1987-1989 3.2L G50

Diagram Ref No 1

What This Product Does:

• Transfers the charging current produced by the alternator to the battery and electrical system.
• Keeps the battery charged while the engine runs.
• Carries voltage and signal lines for the alternator field and warning light circuits.
• Ensures proper communication between the alternator, voltage regulator, and ignition system.
• Integrates wiring for the ignition coil, temperature sensors, and other engine-side electrical parts.
• Ensures reliable power and data flow to these systems for smooth engine operation.
• Uses heat-resistant insulation, sleeves, and grommets to protect wires from engine-bay heat, oil, and vibration.
  
• Prevents short circuits and voltage drops caused by aging or damaged wires.

Common Issues / Symptoms Of A Bad Harness:

• The alternator may fail to charge the battery (no output or intermittent output)
  
• Ignition problems, misfires, poor engine running because sensors or ignition wiring is compromised
  
• Blown fuses or electrical faults in the engine bay
• Loose or corroded connectors, brittle insulation, broken wires
  
• Intermittent electrical gremlins — sometimes works, sometimes doesn’t

Why Replacement Matters:

• Stable voltage to charging and ignition systems
• Elimination of intermittent electrical faults
• Safer, more reliable engine operation

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91160701602

The product you are viewing cross references to these numbers

Pipe Clamp B20x20 – Multi-Use Clamp 
Sold each

High-quality pipe clamp B20x20 designed for a wide range of securing applications across Porsche 911, 924, 924S, and 944 models.

This versatile clamp is used in multiple locations including oil pump pipes, gearbox casing, air injection systems, brake servo pipes, and battery cables, making it an essential component for maintaining correct routing and system integrity throughout the vehicle.

Fits:

• Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
• Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
• Porsche 911 1978-1983 3.0L / SC
• Porsche 911 1984-1986 3.2L
• Porsche 911 1987-1989 3.2L G50
• Porsche 911 1978-1989 3.3L Turbo (930)
• Porsche 924 2.0L 1976-79
• Porsche 924 2.0L 1980-85
• Porsche 924 Turbo 2.0L 1979-81
• Porsche 924 Turbo 2.0L 1982-84
• Porsche 924 Carrera GT 2.0L 1981
• Porsche 924 Carrera GTS 2.0L 1982
• Porsche 924S 2.5L 1986-87
• Porsche 924S 2.5L 1988
• Porsche 944 2.5L 8V 1982-87
• Porsche 944S 2.5L 16V 1987-88
• Porsche 944 Turbo 2.5L 8V 1985-88
• Porsche 944 Turbo S 2.5L 8V 1988

Diagram ref no 39  

Manufactured to OEM specifications, this clamp provides secure fitment, durability, and resistance to corrosion. Supplied individually, it allows flexible replacement for maintenance, repair, or restoration projects.

Key Features

• Pipe clamp size B20x20
• Suitable for Porsche 911, 924, 924S, and 944
• Part number N0206071
• Multi-use: oil pipes, brake servo, air injection, battery cables
• Ensures secure mounting and routing
• Durable and corrosion-resistant construction
• OEM-style fit and performance
• Sold individually

Function and Purpose

This clamp is designed to secure various pipes, hoses, and cables.

It helps to:
• Hold components firmly in place
• Maintain correct routing and alignment
• Prevent vibration-related wear and damage
• Protect critical systems such as oil and braking
• Support long-term system reliability

Why Replace Pipe Clamps

Clamps can degrade over time due to heat and environmental exposure.

Common issues include:
• Loss of clamping strength
• Corrosion or fatigue
• Movement of pipes or cables
• Increased risk of wear or failure

Replacing worn clamps ensures proper securing and protects system components.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

N0206071

The product you are viewing cross references to these numbers

Pipe Clamp B20x20 – Multi-Use Clamp 
Sold each

High-quality pipe clamp B20x20 designed for a wide range of securing applications across Porsche 911, 924, 924S, and 944 models.

This versatile clamp is used in multiple locations including oil pump pipes, gearbox casing, air injection systems, brake servo pipes, and battery cables, making it an essential component for maintaining correct routing and system integrity throughout the vehicle.

Fits:

• Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
• Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
• Porsche 911 1978-1983 3.0L / SC
• Porsche 911 1984-1986 3.2L
• Porsche 911 1987-1989 3.2L G50
• Porsche 911 1978-1989 3.3L Turbo (930)
• Porsche 924 2.0L 1976-79
• Porsche 924 2.0L 1980-85
• Porsche 924 Turbo 2.0L 1979-81
• Porsche 924 Turbo 2.0L 1982-84
• Porsche 924 Carrera GT 2.0L 1981
• Porsche 924 Carrera GTS 2.0L 1982
• Porsche 924S 2.5L 1986-87
• Porsche 924S 2.5L 1988
• Porsche 944 2.5L 8V 1982-87
• Porsche 944S 2.5L 16V 1987-88
• Porsche 944 Turbo 2.5L 8V 1985-88
• Porsche 944 Turbo S 2.5L 8V 1988

Diagram ref no 39  

Manufactured to OEM specifications, this clamp provides secure fitment, durability, and resistance to corrosion. Supplied individually, it allows flexible replacement for maintenance, repair, or restoration projects.

Key Features

• Pipe clamp size B20x20
• Suitable for Porsche 911, 924, 924S, and 944
• Part number N0206071
• Multi-use: oil pipes, brake servo, air injection, battery cables
• Ensures secure mounting and routing
• Durable and corrosion-resistant construction
• OEM-style fit and performance
• Sold individually

Function and Purpose

This clamp is designed to secure various pipes, hoses, and cables.

It helps to:
• Hold components firmly in place
• Maintain correct routing and alignment
• Prevent vibration-related wear and damage
• Protect critical systems such as oil and braking
• Support long-term system reliability

Why Replace Pipe Clamps

Clamps can degrade over time due to heat and environmental exposure.

Common issues include:
• Loss of clamping strength
• Corrosion or fatigue
• Movement of pipes or cables
• Increased risk of wear or failure

Replacing worn clamps ensures proper securing and protects system components.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

N0206071

The product you are viewing cross references to these numbers

Fuel Injector Connector Housing – Electrical Plug 

High-quality replacement fuel injector connector housing designed for a wide range of Porsche models including 911, 964, 924S, 944, 968, and 928.

This component forms the electrical connector housing for the fuel injector wiring, ensuring a secure and reliable connection between the vehicle’s wiring harness and the fuel injectors. It is essential for maintaining correct electrical signal transmission and consistent fuel delivery.

Fits:

• Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
• Porsche 911 1978-1983 3.0L / SC
• Porsche 911 1984-1986 3.2L
• Porsche 911 1987-1989 3.2L G50
• Porsche 911 1975-1977 3.0L Turbo (930)
• Porsche 911 1978-1989 3.3L Turbo (930)
• Porsche 964 (911) C2 1989-93
• Porsche 964 (911) C4 1989-93
• Porsche 964 (911) RS 3.6L 1991-93
• Porsche 964 (911) RS 3.8L 1991-93
• Porsche 964 (911) TURBO 3.3L 1991-93
• Porsche 964 (911) TURBO 3.6L 1991-93
• Porsche 924S 2.5L 1986-87
• Porsche 924S 2.5L 1988
• Porsche 944 2.5L 8V 1982-87
• Porsche 944 2.7L 8V 1988-89
• Porsche 944S 2.5L 16V 1987-88
• Porsche 944S2 3.0L 16V 1989-91
• Porsche 944 Turbo 2.5L 8V 1985-88
• Porsche 944 Turbo 2.5L 8V 1989-91
• Porsche 944 Turbo S 2.5L 8V 1988
• Porsche 968 3.0L 1992-94
• Porsche 968 Sport 3.0L 1994-95
• Porsche 968 CS 3.0L 1993-95
• Porsche 968 Turbo S 3.0L 1993-94
• Porsche 928S4 5.0L 1987-92
• Porsche 928GT 5.0L 1989-91
• Porsche 928GTS 5.4L 1992-95

Diagram ref no 3

Manufactured to OEM specifications, this connector housing is built from durable materials designed to withstand engine bay heat, vibration, and long-term use while maintaining a secure fit and reliable electrical contact.

A direct replacement part, this injector connector housing is ideal for repairing damaged or degraded connectors within the fuel injection system.

Key Features

• Direct replacement fuel injector connector housing
• Suitable for multiple Porsche models (911, 964, 924S, 944, 968, 928)
• Ensures secure electrical connection to fuel injectors
• Designed for wiring harness repair and maintenance
• Durable construction for engine bay conditions
• OEM-style fit and function

Function and Purpose

This connector housing provides the interface between the wiring harness and fuel injectors.

It helps to:

• Ensure reliable electrical signal transmission
• Maintain correct injector operation
• Prevent loose or intermittent connections
• Support efficient fuel delivery and engine performance

Why Replace Your Injector Connector Housing

Electrical connectors can degrade over time due to heat and exposure.

Common issues include:

• Cracked or brittle plastic housing
• Loose or poor electrical connections
• Corrosion or wear at contact points
• Misfires or inconsistent injector performance

Replacing the connector housing restores proper electrical integrity and improves engine reliability.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

92861282501

The product you are viewing cross references to these numbers

Fuel Injector Connector Housing – Electrical Plug 

High-quality replacement fuel injector connector housing designed for a wide range of Porsche models including 911, 964, 924S, 944, 968, and 928.

This component forms the electrical connector housing for the fuel injector wiring, ensuring a secure and reliable connection between the vehicle’s wiring harness and the fuel injectors. It is essential for maintaining correct electrical signal transmission and consistent fuel delivery.

Fits:

• Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
• Porsche 911 1978-1983 3.0L / SC
• Porsche 911 1984-1986 3.2L
• Porsche 911 1987-1989 3.2L G50
• Porsche 911 1975-1977 3.0L Turbo (930)
• Porsche 911 1978-1989 3.3L Turbo (930)
• Porsche 964 (911) C2 1989-93
• Porsche 964 (911) C4 1989-93
• Porsche 964 (911) RS 3.6L 1991-93
• Porsche 964 (911) RS 3.8L 1991-93
• Porsche 964 (911) TURBO 3.3L 1991-93
• Porsche 964 (911) TURBO 3.6L 1991-93
• Porsche 924S 2.5L 1986-87
• Porsche 924S 2.5L 1988
• Porsche 944 2.5L 8V 1982-87
• Porsche 944 2.7L 8V 1988-89
• Porsche 944S 2.5L 16V 1987-88
• Porsche 944S2 3.0L 16V 1989-91
• Porsche 944 Turbo 2.5L 8V 1985-88
• Porsche 944 Turbo 2.5L 8V 1989-91
• Porsche 944 Turbo S 2.5L 8V 1988
• Porsche 968 3.0L 1992-94
• Porsche 968 Sport 3.0L 1994-95
• Porsche 968 CS 3.0L 1993-95
• Porsche 968 Turbo S 3.0L 1993-94
• Porsche 928S4 5.0L 1987-92
• Porsche 928GT 5.0L 1989-91
• Porsche 928GTS 5.4L 1992-95

Diagram ref no 3

Manufactured to OEM specifications, this connector housing is built from durable materials designed to withstand engine bay heat, vibration, and long-term use while maintaining a secure fit and reliable electrical contact.

A direct replacement part, this injector connector housing is ideal for repairing damaged or degraded connectors within the fuel injection system.

Key Features

• Direct replacement fuel injector connector housing
• Suitable for multiple Porsche models (911, 964, 924S, 944, 968, 928)
• Ensures secure electrical connection to fuel injectors
• Designed for wiring harness repair and maintenance
• Durable construction for engine bay conditions
• OEM-style fit and function

Function and Purpose

This connector housing provides the interface between the wiring harness and fuel injectors.

It helps to:

• Ensure reliable electrical signal transmission
• Maintain correct injector operation
• Prevent loose or intermittent connections
• Support efficient fuel delivery and engine performance

Why Replace Your Injector Connector Housing

Electrical connectors can degrade over time due to heat and exposure.

Common issues include:

• Cracked or brittle plastic housing
• Loose or poor electrical connections
• Corrosion or wear at contact points
• Misfires or inconsistent injector performance

Replacing the connector housing restores proper electrical integrity and improves engine reliability.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

92861282501

The product you are viewing cross references to these numbers

DME / Engine harness. Porsche 911 3.2L 1986-89



This harness connects to the DME computer on the 3.2 Carrera models from '86 to the end of '89. It connects to several engine sensors including the air flow sensor, o2 sensor, engine speed sensor, etc.

It uses all the proper shielded cables to improve the accuracy of signals coming from the engine. Unlike some competitors, no connectors need to be re-used from original harnesses.

Click 'Zoom in' for large parts diagram.
Diagram ref no 1A

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91161217309

The product you are viewing cross references to these numbers

Motronic DME connector kit - 35 Pin 



Fits:
Porsche 924S - 1986 to 1988
Porsche 944 - 1982 to 1991
Porsche 944 turbo - 1985 to 1991
Porsche 968 - 1992 to 1995
Porsche 911 - 1984 to 1989

Connector will fit Bosch units
0 281 200 076
0 281 200 050

Connector List:

• 35 Pin ECU Connector
• Wire Seals
• JPT Terminals
• Connector Screws

Features:
After three decades of heat and extreme environmental conditions, the connectors and wires become extremely brittle and fragile and can break. Oftentimes, they break by just unplugging them. This can cause signal loss and prevent your engine from starting.

This OEM+ replacement kit will replace the stock ECU Bosch DME connector.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

94461200207

The product you are viewing cross references to these numbers

Motronic DME connector kit - 55 Pin 



Fits:
Porsche 944 S - 1987 to 1988
Porsche 944  S2- 1989 to 1991

Connector will fit Bosch units
0 281 200 195

Connector List:

• 55 Pin ECU Connector
• Wire Seals
• Terminals
• Connector Screws
  

Suitable for Bosch Motronic
M1.3 / M1.5 / M1.52 / M1.54
MP5.1 / MP5.2 / MP7 / M2.5 / M2.7 /M2.10

Features:
After three decades of heat and extreme environmental conditions, the connectors and wires become extremely brittle and fragile and can break. Oftentimes, they break by just unplugging them. This can cause signal loss and prevent your engine from starting.

This OEM+ replacement kit will replace the stock ECU Bosch DME connector.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

94461812405

The product you are viewing cross references to these numbers