Cancellation kit for PASM Porsche 997 (not cabrio.)

Adjustable suspension kit. Advanced Trackday. Porsche 991 GT3 (2013-) 120/200 N/mm

Fits:
Porsche 911 (991) GT3 RS, year 2015>>

General Features:
• TTX technology
• 2-way adjustable
• Height adjustable
• Rebuildable
• Corrosion salt spray tested (ISO 9227)
• 2 year limited warranty

Front:
• McPherson strut, upside down
• Twin tube technology
• Separate compression and rebound adjusters
• Spring preload adjuster
• Approx. 20 mm lower than standard with recommended setup
• Spring rate main spring 120 N/mm
• Spring rate helper spring 20 N/mm
• Dustcovers
• Use with original top mounts

Rear:
• Conventional Shock Absorber
• Twin Tube technology
• Separate compression and rebound adjusters
• Spring preload adjuster
• Approx. 20 mm lower than standard with recommended setup
• Spring rate main spring 200 N/mm
• Spring rate helper spring 20 N/mm
• Dustcovers
• Use with original top mounts

Notes: The set consists of 2 dampers POF 5R00 for the front and 2 dampers POF 6R00 for the rear. 

Adjustable suspension kit (without springs). 

Fits:
Porsche 911 (991.1) GT3/RS, 2013 – 2015
Porsche 911 (991.2) GT3/RS, 2017 – 2018

TTX technology:
•  2-way adjustable
•  Height adjustable
•  Rebuildable
•  Corrosion salt spray tested (ISO 9227)
•  2 year limited warranty
•  Delivery without springs - please add them separately

This coil over set is available as a:
•  Track day kit with softer springs
   - front: 48120-17 (main) / 05173-12 (help.)
   - rear: 48140-37 (main) / 05173-12 (help.)
•  Motorsport kit with stiffer springs
   - front: 48120-21 (main) / 05173-12 (help.)
   - rear: 48140-37 (main) / 05173-12 (help.)

Front:
•   McPherson strut, upside down
•   Twin tube technology
•   Separate compression and rebound adjusters
•   Spring preload adjuster
•   Approx. 20 mm lower than standard with recommended setup
•   Spring rate main spring 200 N/mm (TRACKDAY KIT)
•   Spring rate main spring 120 N/mm (MOTORSPORT KIT)
•   Spring rate helper spring 7,5 N/mm

•   Dustcovers
•   Use with original top mounts

Rear:
•   McPherson strut, upside down
•   Twin tube technology
•   Separate compression and rebound adjusters
•   Spring preload adjuster
•   Approx. 20 mm lower than standard with recommended setup
•   Dustcovers
•   Use with original top mounts

CARGRAPHIC AirLift Evolution Upgrade Kit

The CARGRAPHIC AirLift Evolution is available as an upgrade kit to be mounted on an existing factory front coilover suspension.  Fits cars with PASM or without 

It is important to note that the CARGRAPHIC AirLift Evolution can only be fitted to coilovers with cylindrical suspension springs. Alternatively, the kit can be fitted to Bilstein, Ohlins and KW coilover suspension kits, which are available to purchase from Design911

Please note when ordering we will need your full vehicle details, together with which type of coilover kit is being used with the kit 

Consisting of:
• 2x CARGRAPHIC AirLift Air spring / Air bellows
• 1x CARGRAPHIC AirLift Control unit V9
• 1x Wiring loom
• 1x Air duct set with connections
• 1x Remote control
• Fitting material
• Installation manual
• TÜV-Certificate*
• For vehicles with coilover suspension with cylindrical suspension springs

Features:
• Raising of the body by 55mm, measured at the fender
• Fast response time: maximum increase within 15 seconds
• No change or impairment of driving behaviour
• Safe control with automatic lowering from 50km/h
• Pneumatic operation, thus no liquid in the vehicle
• No reduction of the luggage compartment volume
• Low weight of approx. 3Kg
• Short installation time of approx. 3 hours.
• Operation via radio or permanently installed switch
• German TUEV certificate*
• Tested by world champion Walter Röhrl
• Fitting:  A qualified, experienced technician will need to fit this kit needs with due skill, care and diligence.