do not press the back button…
Enter your VAT number here and click Verify:
Your details have been verified. VAT number registered to:
,
.
Your order will now be zero rated for VAT purposes. We reserve the right to verify these details after your order request has been made and reinstate VAT if required.
Your VAT details were not recognised or were invalid. Your VAT number must be matched to your Billing Country as specified above. This is currently specified as . You do not need to enter the country code part of your VAT number as this has already been selected in your billing address details above.
The VAT number checking service is currently offline. Please supply your VAT details within the comments or special instructions field below and we will apply a VAT discount after placing your order request.
OE Match
OE Match for Porsche
OE Match is a brand that provides a wide range of Porsche components, from gaskets to suspension hardware, engine parts, and interior trim. Over 6,700 individual part numbers, and over 11,800 OE cross-references catalogued, and are constantly developing new lines.OE Match has over 100 new products currently in the engineering phase, which will be quality-controlled and added to their catalog. The mission is to keep all Porsche vehicles on the road by offering a vast selection of parts that can address various problems across different Porsche generations
A Quick Look at OE Match
OE Match information on this page is based on details supplied by the manufacturer or distributor, plus any OE references provided with the parts.
Choosing the Right Fit for Your Porsche
Where OE Match is listed for Porsche, use the supplied model coverage and OE references to confirm suitability. Check details that commonly affect fitment such as model year, side/position, and connector type where relevant.
- Often chosen when owners want OE-equivalent quality with sensible running costs, especially for routine service and wear items.
- Typical reasons to replace include restoring reliability, addressing age-related wear, or refreshing multiple components during larger repair work.
- Common defects from incorrect application include noise, premature wear, leaks, or fitment quirks if the wrong variant is selected or fitted with old seals/hardware.
- Watch for symptoms such as unusual noises, early wear, or repeat failures after recent work, which can indicate mismatched parts or supporting items left worn.
- Always cross-check OEM part numbers, read model-year notes, and verify compatibility before ordering.
- For safety-critical components, confirm specification and fitment carefully and have installation checked by a competent technician.
Browse by Category
If you already know the area you are working on, start with the category and then filter by Porsche model. Where real-world symptoms and typical reasons to replace are provided, use them to keep the wording grounded.
Brakes — Brake components are renewed to restore stopping performance, address wear or upgrade a Porsche for fast road or track use. Common symptoms include vibration under braking, longer stopping distances, squealing, pulling to one side, warning lights and visible wear to discs and pads.
Brake Pad Wear Sensors — Brake pad wear sensors are replaced when pads are renewed or when warning lights indicate a broken or worn sensor. Symptoms include brake wear warnings even with new pads, damaged sensor cables, or broken clips around the caliper area.
Engine Electrical — Engine electrical parts are changed when there are starting, charging, ignition, or sensor-related faults that affect drivability and reliability, such as intermittent no-start, misfires, rough idle, poor charging, warning lights or heat-soak failures.
Service Parts — Service parts are replaced as routine maintenance to keep the engine and systems reliable, efficient, and protected, often resolving hard starting, rough idle, poor fuel economy and warning lights caused by clogged filters or worn ignition components.
Service Kits — Service kits bundle key service components to simplify maintenance and set the car back to a known baseline, especially useful when catching up on overdue servicing or dealing with general sluggish running, inconsistent idle and reduced performance.
- For brake parts, confirm whether items are OE-equivalent replacements or performance upgrades and check if new fitting kits and sensors are required.
- On service items and kits, match the kit to your exact Porsche model, engine and year, and review what is included so you can add any extra “while you are there” parts.
Explore OE Match at Design911
View the current OE Match range for Porsche at Design911, then filter by model and category to narrow down to the right parts.
Keep your Porsche’s braking and stability systems performing at their best with these front ABS / speed sensor harness repair kits. Designed to repair the front left and front right harnesses, they fix faulty wiring and connector issues that can cause ABS and traction control warnings.
Over time, wiring can suffer from wear, corrosion, or cracking, leading to dashboard lights, false ABS activation, or complete system failure. These repair kits restore proper communication between the ABS sensors and control unit, ensuring accurate speed data for safe braking and stability control.
Fits:
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
The front ABS/speed sensor harness repair kit is designed to repair faulty wiring connections between the front wheel speed sensors and the ABS control unit. These repair kits are essential when the harness becomes damaged, corroded, or worn out.
Functions:
- Restores accurate wheel speed signal transmission.
- Ensures proper function of ABS, traction control, and Porsche Stability Management (PSM).
- Repairs worn wiring or connectors without needing a full loom replacement.
- Cost-effective repair solution.
- ABS warning light illuminated on the dash.
- Traction control or PSM light turning on or flashing.
- Erratic ABS function – brakes pulsing unnecessarily, or ABS not engaging when needed.
- Loss of stability or traction assistance during braking or acceleration.
- Fault codes logged for the affected wheel sensor.
- Visible damage such as frayed wires, cracked insulation, or corroded connectors.
The ABS and traction control systems are vital for safe braking and handling, especially in wet or slippery conditions. A faulty harness can disable these systems, increasing stopping distances and reducing stability. Repairing with these repair kits ensures the ABS system functions as intended, restoring safety and reliability.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99661295
The product you are viewing cross references to these numbers
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
Shop Securely
12 Month Warranty
Worldwide Delivery
Restore your Porsche’s braking and stability systems with these rear ABS / speed sensor harness repair kits. Designed for direct repair of the rear left and rear right sensor wiring, these kits replace worn or damaged harnesses that can trigger ABS and traction control faults.
Fits:
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 Carrera 2S 3.8L 2005>>
- Porsche 997 Carrera 4 3.6L 2005>>
- Porsche 997 Carrera 4S 3.8L 2005>>
- Porsche 997 TURBO 2007>>
- Porsche 997 GT3 2007>>
- Porsche 997 GT2 2007>>
- Porsche 997 MKII Carrera C2 3.6L 2009>>
- Porsche 997 MKII Carrera C4 3.6L 2009>>
- Porsche 997 MKII Carrera C2S 3.8L 2009>>
- Porsche 997 MKII Carrera C4S 3.8L 2009>>
- Porsche 997 MKII GT3 2010>>
- Porsche 997 MKII Turbo 2009>>
- Porsche 997 MKII GT2 RS 2011>>
What This Product Does:
The rear ABS/speed sensor harness repair kit is designed to replace the damaged or faulty wiring that connects the rear wheel speed sensors to the ABS control module.
Functions Include:
- Restoring ABS accuracy – Transmits precise wheel speed data from the rear wheels.
- Maintaining Traction Control & PSM (Porsche Stability Management) – Critical for stability and braking systems.
- Repairing Faulty Wiring/Connectors – Fixes issues caused by wear, corrosion, or damage.
- Cost-Efficient Solution – Replaces only the defective section of harness instead of the entire loom.
Over time, ABS wiring can suffer from corrosion, cracks, or connector wear, leading to dashboard warning lights and reduced braking performance. These repair kits provide a cost-effective solution without needing to replace the full wiring loom, ensuring your ABS, traction control, and Porsche Stability Management (PSM) operate as intended.
Symptoms Of A Failing Rear ABS Sensor Harness:
- ABS warning light illuminated on the dashboard.
- Traction control / PSM light on or flashing.
- Inconsistent ABS operation – pulsing brakes when unnecessary or ABS not engaging when it should.
- Loss of stability or traction control under acceleration or cornering.
- Stored fault codes for rear left or rear right ABS/speed sensor.
- Physical damage – cracked insulation, frayed wiring, or corroded connectors at the sensor.
The ABS and traction control systems are safety-critical. A failed harness can disable these systems, leading to longer stopping distances and reduced control in poor conditions. Installing a new repair kit restores reliable communication between the rear wheel sensors and the ABS control unit.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99761296
The product you are viewing cross references to these numbers
- Porsche 997 MK1 Carrera 2 3.6L 2005-08
- Porsche 997 MK1 Carrera 2S 3.8L 2005-08
- Porsche 997 MK1 Carrera 4 3.6L 2005-08
- Porsche 997 MK1 Carrera 4S 3.8L 2005-08
- Porsche 997 MK1 TURBO 2007-09
- Porsche 997 MK1 GT3 2007-09
- Porsche 997 MK1 GT2 2007-09
- Porsche 997 MKII Carrera C2 3.6L 2009-12
- Porsche 997 MKII Carrera C4 3.6L 2009-12
- Porsche 997 MKII Carrera C2S 3.8L 2009-12
- Porsche 997 MKII Carrera C4S 3.8L 2009-12
- Porsche 997 MKII GT3 2010-11
- Porsche 997 MKII Turbo 2010-13
- Porsche 997 MKII GT2 RS 2011-13
Shop Securely
12 Month Warranty
Worldwide Delivery
.jpeg?width=197&height=148&format=webp "Suspension wishbone arms, ball joints & tie rods kit front. Porsche 993 1989-94 (NEW) Part No. 99334101702 / 99334101802 - 99334104902, 99334104906, 99334104907, 99334101700, 99334101801, 99334101702, 99334101802, 99334141501, 993.341.415.01, 993 341 415 01, 993.341.017.02, 993 341 017 02, 99334141500, 993.341.415.00, 993 341 415 00, 993.341.017.00, 993 341 017 00, 99334703105, PCG419831C")
Front Suspension Wear and Replacement
On the Porsche 993, common failure points in the front suspension include the
control arms, ball joints, tie rods and bellows. As these components wear, you may notice clunking over bumps, loose or vague steering, uneven tire wear, or steering wheel vibration. Because the front suspension system is highly interconnected, wear in one part often accelerates the deterioration of other components.
To address this, we’ve developed a complete wishbone arms, ball joints & tie rods designed to restore handling, performance, and safety. This kit includes new front control arms, ball joints, tie rods and bellows ensuring a comprehensive solution rather than piecemeal repairs.
Fits:
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
Why Control Arms Matter
Control arms serve as a critical link between the suspension and the subframe. Their hinged design allows the suspension to articulate as the vehicle absorbs bumps or navigates turns. On vehicles with independent suspension, like the 993, multiple arms and connection points contribute to better ride comfort and stability.
As bushings and joints within a control arm wear out, the suspension can begin to feel loose or unstable. While some designs allow individual components to be serviced, many control arms require complete replacement to restore proper function.
Symptoms of Control Arm Failure
Signs that your control arms may need replacement include:
- Excessive play where the arms connect to the subframe or knuckle
- Clunking or knocking noises from the suspension
- Uneven tire wear
- Difficulty achieving proper wheel alignment
- Steering wheel vibration at highway speeds
- Wandering or pulling sensation through the steering wheel
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
SUSPENSIONKIT993.3
The product you are viewing cross references to these numbers
- Porsche 964 (911) TURBO 3.6L 1991-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
.jpg?width=197&height=148&format=webp "Suspension wishbone control arm & ball joints kit front. Porsche 993 1989-94 (NEW) Part No. 99334101702 / 99334101802 - 99334104902, 99334104906, 99334104907, 99334101700, 99334101801, 99334101702, 99334101802, 99334141501, 993.341.415.01, 993 341 415 01, 993.341.017.02, 993 341 017 02, 99334141500, 993.341.415.00, 993 341 415 00, 993.341.017.00, 993 341 017 00")
Front Suspension Wear and Replacement
On the Porsche 993, common failure points in the front suspension include the control arm bushings and ball joints. As these components wear, you may notice clunking over bumps, loose or vague steering, uneven tire wear, or steering wheel vibration. Because the front suspension system is highly interconnected, wear in one part often accelerates the deterioration of other components.
To address this, we’ve developed a complete wishbone control arm & ball joints kit designed to restore handling, performance, and safety. This kit includes new front control arms and ball joints, ensuring a comprehensive solution rather than piecemeal repairs.
Fits:
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
Why Control Arms Matter
Control arms serve as a critical link between the suspension and the subframe. Their hinged design allows the suspension to articulate as the vehicle absorbs bumps or navigates turns. On vehicles with independent suspension, like the 993, multiple arms and connection points contribute to better ride comfort and stability.
As bushings and joints within a control arm wear out, the suspension can begin to feel loose or unstable. While some designs allow individual components to be serviced, many control arms require complete replacement to restore proper function.
Symptoms of Control Arm Failure
Signs that your control arms may need replacement include:
- Excessive play where the arms connect to the subframe or knuckle
- Clunking or knocking noises from the suspension
- Uneven tire wear
- Difficulty achieving proper wheel alignment
- Steering wheel vibration at highway speeds
- Wandering or pulling sensation through the steering wheel
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
SUSPENSIONKIT993.2
The product you are viewing cross references to these numbers
- Porsche 964 (911) TURBO 3.6L 1991-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
Restore your Porsche’s braking safety with this ABS / Speed Sensor Harness Repair Kit – Front Left. Designed as a direct-fit repair solution, this kit replaces the damaged wiring and connectors between the ABS wheel speed sensor and the control module.
Worn or corroded harnesses can trigger ABS and traction control warning lights, compromise stability systems, and affect braking performance. This repair kit provides a cost-effective fix without needing to replace the full wiring loom.
Fits:
What This Product Does:
- Restores ABS Functionality – Ensures the ABS system receives accurate wheel speed signals.
- Maintains Traction Control & Stability Systems – Many Porsche safety systems rely on proper ABS sensor signals.
- Corrects Electrical Faults – Replaces damaged or corroded wiring/connectors in the sensor harness.
- Cost-Effective Solution – Allows repair without replacing the full wiring loom.
- ABS warning light illuminated on the dashboard.
- Traction control / PSM (Porsche Stability Management) light turning on.
- Inconsistent or false ABS activation (brakes pulsing when they shouldn’t).
- Loss of ABS or traction control functions under braking or acceleration.
- Fault codes stored for front left ABS/speed sensor in diagnostics.
- Physical damage such as cracked insulation, frayed wiring, or corroded connectors.
The ABS system is critical for safe braking performance. If the harness is faulty, the system may become disabled, putting safety at risk. This repair kit restores proper connection between the ABS sensor and control module, ensuring reliable operation of ABS, traction control, and stability systems.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99761296500
The product you are viewing cross references to these numbers
- Porsche 997 MK1 Carrera 4 3.6L 2005-08
- Porsche 997 MK1 Carrera 4S 3.8L 2005-08
- Porsche 997 MK1 TURBO 2007-09
- Porsche 997 MK1 GT2 2007-09
- Porsche 997 MKII Carrera C4 3.6L 2009-12
- Porsche 997 MKII Carrera C4S 3.8L 2009-12
- Porsche 997 MKII Turbo 2010-13
- Porsche 997 MKII GT2 RS 2011-13
Shop Securely
12 Month Warranty
Worldwide Delivery
Shock Absorber Top Mount Kit (OE Ref: 99733306103 ) For Cars with Standard Chassis (I029) Porsche 997 C2 / C4 MKI 2005-08 CABRIO This kit includes two rear upper shock mounts—the perfect solution if your existing mounts are worn, noisy, or if you’re fitting new rear shocks.
The suspension shock absorber mount secures the shock absorber to the vehicle’s chassis or body, while allowing the necessary movement and cushioning within the suspension system. Constructed from a combination of metal and rubber, the mount provides both strength and flexibility to absorb vibrations and impacts from the road.
Fits:
For Cars with Standard Chassis (I029)
Porsche 997 C2 / C4 MKI 2005-08 CABRIO
Common Signs of Shock Mount Wear
Clunking or Banging Noises: Damaged or worn mounts can cause knocking or rattling sounds, especially over bumps, potholes, or uneven roads. This occurs when the shock absorber is no longer properly secured
Excessive Body Roll or Bouncing: Faulty mounts may limit the shock absorber’s effectiveness, leading to increased body roll when cornering or excessive bouncing over rough surfaces.
Click 'Zoom in' for large parts diagram
Diagram ref no 2
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99733306103
The product you are viewing cross references to these numbers
- Porsche 997 MK1 Carrera 2 3.6L 2005-08
- Porsche 997 MK1 Carrera 4 3.6L 2005-08
Shock Absorber Top Mount Kit (OE Ref: 99733306100 ) For Cars with Standard Chassis (I029) This kit includes two rear upper shock mounts—the perfect solution if your existing mounts are worn, noisy, or if you’re fitting new rear shocks.
The suspension shock absorber mount secures the shock absorber to the vehicle’s chassis or body, while allowing the necessary movement and cushioning within the suspension system. Constructed from a combination of metal and rubber, the mount provides both strength and flexibility to absorb vibrations and impacts from the road.
Fits:
For Cars with Standard Chassis (I029)
- Porsche 997 C2 / C2S / C4 MKI 2005-08 COUPE / TARGA
- Porsche 997 C2 MKII 2009-12 COUPE
- Porsche 997 C4 MKII 2009-12 COUPE / TARGA
Common Signs of Shock Mount Wear
Clunking or Banging Noises: Damaged or worn mounts can cause knocking or rattling sounds, especially over bumps, potholes, or uneven roads. This occurs when the shock absorber is no longer properly secured
Excessive Body Roll or Bouncing: Faulty mounts may limit the shock absorber’s effectiveness, leading to increased body roll when cornering or excessive bouncing over rough surfaces.
Click 'Zoom in' for large parts diagram
Diagram ref no 2
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99733306100
The product you are viewing cross references to these numbers
- Porsche 997 MK1 Carrera 2 3.6L 2005-08
- Porsche 997 MK1 Carrera 2S 3.8L 2005-08
- Porsche 997 MK1 Carrera 4 3.6L 2005-08
- Porsche 997 MKII Carrera C2 3.6L 2009-12
- Porsche 997 MKII Carrera C4 3.6L 2009-12
Shock Absorber Top Mount Kit (OE Ref: 99733306101) For Cars with Sport Chassis (I030) or PASM (I475, This kit includes two rear upper shock mounts—the perfect solution if your existing mounts are worn, noisy, or if you’re fitting new rear shocks.
The suspension shock absorber mount secures the shock absorber to the vehicle’s chassis or body, while allowing the necessary movement and cushioning within the suspension system. Constructed from a combination of metal and rubber, the mount provides both strength and flexibility to absorb vibrations and impacts from the road.
Fits:
For Cars with Sport Chassis (I030) or PASM (I475)
Porsche 997 MKI C2 / C2S / C4 / C4S 2005-08 COUPE / TARGA
Porsche 997 TURBO MKI 2005-08
Porsche 997 GT3 MKI 2007-2008
Porsche 997 MKII C2 / C2S / C4 /C4S 2009-2012 COUPE / TARGA
Porsche 997 MKII GTS (I011) / (I019)
Porsche 997 MKII 911 SPORT CLASSIC
(I756)
Porsche 997 TURBO MKII 2010-2013
Common Signs of Shock Mount Wear
Clunking or Banging Noises: Damaged or worn mounts can cause knocking or rattling sounds, especially over bumps, potholes, or uneven roads. This occurs when the shock absorber is no longer properly secured
Excessive Body Roll or Bouncing: Faulty mounts may limit the shock absorber’s effectiveness, leading to increased body roll when cornering or excessive bouncing over rough surfaces.
Click 'Zoom in' for large parts diagramDiagram ref no 2
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99733306101
The product you are viewing cross references to these numbers
- Porsche 997 MK1 Carrera 2 3.6L 2005-08
- Porsche 997 MK1 Carrera 2S 3.8L 2005-08
- Porsche 997 MK1 Carrera 4 3.6L 2005-08
- Porsche 997 MK1 Carrera 4S 3.8L 2005-08
- Porsche 997 MK1 TURBO 2007-09
- Porsche 997 MK1 GT3 2007-09
- Porsche 997 MKII Carrera C2 3.6L 2009-12
- Porsche 997 MKII Carrera C4 3.6L 2009-12
- Porsche 997 MKII Carrera C2S 3.8L 2009-12
- Porsche 997 MKII Carrera C4S 3.8L 2009-12
- Porsche 997 MKII Turbo 2010-13
Shock Absorber Top Mount Kit (OE Ref: 99733306102)
This kit includes two rear upper shock mounts for Porsche cabrio models with PASM — the perfect solution if your
existing mounts are worn, noisy, or if you’re fitting new rear shocks.
The suspension shock absorber mount secures the shock absorber to the vehicle’s chassis or body, while allowing the necessary movement and cushioning within the suspension system. Constructed from a combination of metal and rubber, the mount provides both strength and flexibility to absorb vibrations and impacts from the road.
Fits:
Porsche 997 MKI C2 / C2S / C4 / C4S CABRIO with PASM (I475)
Porsche 997 MKII C2 / C2S / C4 CABRIO with STD suspension (I029)
Porsche 997 MKII C4 / C4S CABRIO with PASM (I475)
Porsche 997 MKII GTS CABRIO with PASM (I475) / (I019)
Porsche 997 MKII SPEEDSTER with PASM (I475) / (I503)
Common Signs of Shock Mount Wear
Clunking or Banging Noises: Damaged or worn mounts can cause knocking or rattling sounds, especially over bumps, potholes, or uneven roads. This occurs when the shock absorber is no longer properly secured
Excessive Body Roll or Bouncing: Faulty mounts may limit the shock absorber’s effectiveness, leading to increased body roll when cornering or excessive bouncing over rough surfaces.
Click 'Zoom in' for large parts diagram
Diagram ref no 2
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99733306102
The product you are viewing cross references to these numbers
- Porsche 997 MK1 Carrera 2 3.6L 2005-08
- Porsche 997 MK1 Carrera 2S 3.8L 2005-08
- Porsche 997 MK1 Carrera 4 3.6L 2005-08
- Porsche 997 MK1 Carrera 4S 3.8L 2005-08
- Porsche 997 MKII Carrera C2 3.6L 2009-12
- Porsche 997 MKII Carrera C4 3.6L 2009-12
- Porsche 997 MKII Carrera C2S 3.8L 2009-12
- Porsche 997 MKII Carrera C4S 3.8L 2009-12
Brake Hydraulic Hose Kit. This kit contains 2 x front & 2 x rear brake lines
Brake hydraulic hoses are flexible lines that connect the rigid brake lines running along your vehicle’s body or frame to the brake calipers. These hoses are specially engineered and sized to move with the suspension, allowing for smooth travel as the vehicle goes over bumps and uneven road surfaces.
Because they carry brake fluid and transmit hydraulic pressure to the calipers or wheel cylinders, it’s essential to inspect brake hoses regularly. Over time, rubber hoses can deteriorate, with the inner lining shrinking and restricting fluid flow, which negatively affects braking performance
Fits:
- Porsche Boxster 987 2.7L 2005 -08/08
- Porsche Boxster 987 S 3.2/3.4L 2005-08/08
- Porsche Boxster 987 MKII 2.9L 2009-2012
- Porsche Boxster S 987 MKII 3.4L 2009-2012
- Porsche Cayman 2.7L 987C 2006-08
- Porsche Cayman S 3.4L 987C 2005-08
- Porsche Cayman 2.9L 987C MKII 2009-12
- Porsche Cayman S / R 3.4L 987C MKII 2009-12
Brake Hydraulic Hose Kit Failure Symptoms
- Cracks or frays on external layer of hose
- Heavy corrosion on end fittings
- Leaks of any kind
- Loss of brake pedal pressure
- Poor braking performance
- Inoperable brakes
Click 'Zoom in' for large parts diagram.
Diagram ref no 4
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
98735563701
The product you are viewing cross references to these numbers
- Porsche Boxster 987 2.7L 2005-08/08
- Porsche Boxster 987 S 3.2/3.4L 2005-08/08
- Porsche Boxster 987 MKII 2.9L 2009-12
- Porsche Boxster S 987 MKII 3.4L 2009-12
- Porsche Cayman 2.7L 987C 2006-08
- Porsche Cayman S 3.4L 987C 2005-08
- Porsche Cayman 2.9L 987C MKII 2009-12
- Porsche Cayman S / R 3.4L 987C MKII 2009-12
Front Suspension Wear and Replacement
On the Porsche 964, common failure points in the front suspension include the control arm bushings and ball joints. As these components wear, you may notice clunking over bumps, loose or vague steering, uneven tire wear, or steering wheel vibration. Because the front suspension system is highly interconnected, wear in one part often accelerates the deterioration of other components.
To address this, we’ve developed a complete wishbone control arm & ball joints kit designed to restore handling, performance, and safety. This kit includes new front control arms and ball joints, ensuring a comprehensive solution rather than piecemeal repairs.
Fits:
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
Why Control Arms Matter
Control arms serve as a critical link between the suspension and the subframe. Their hinged design allows the suspension to articulate as the vehicle absorbs bumps or navigates turns. On vehicles with independent suspension, like the 964, multiple arms and connection points contribute to better ride comfort and stability.
As bushings and joints within a control arm wear out, the suspension can begin to feel loose or unstable. While some designs allow individual components to be serviced, many control arms require complete replacement to restore proper function.
Symptoms of Control Arm Failure
Signs that your control arms may need replacement include:
- Excessive play where the arms connect to the subframe or knuckle
- Clunking or knocking noises from the suspension
- Uneven tire wear
- Difficulty achieving proper wheel alignment
- Steering wheel vibration at highway speeds
- Wandering or pulling sensation through the steering wheel
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
SUSPENSIONKIT964
The product you are viewing cross references to these numbers
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
Designed to deliver clear visibility and safe driving in all weather conditions, this wiper arm and blade set provides the correct pressure and alignment for streak-free wiping.
Fits:
- Porsche Panamera V6 3.6L 2WD
- Porsche Panamera 4 V6 3.6L 4WD
- Porsche Panamera S V8 4.8L
- Porsche Panamera 4S V8 4.8L
- Porsche Panamera GTS V8 4.8L
- Porsche Panamera Turbo V8 4.8L
- Porsche Panamera Turbo S V8 4.8L
- Porsche Panamera Diesel V6 3.0L
- Porsche Panamera S Hybrid V6 3.0L
- Porsche Panamera V6 3.6L 2WD (310Hp)
- Porsche Panamera 4 V6 3.6L 4WD (310Hp)
- Porsche Panamera S V6 Turbo 3.0L 2WD (420Hp)
- Porsche Panamera S V6 Turbo 3.0L 2WD Executive
- Porsche Panamera 4S V6 Turbo 3.0L 4WD (420Hp)
- Porsche Panamera 4S V6 Turbo 3.0L 4WD Executive
- Porsche Panamera GTS V8 4.8L 4WD (440Hp)
- Porsche Panamera Turbo V8 4.8L (520Hp)
- Porsche Panamera Turbo V8 Executive
- Porsche Panamera Turbo S V8 4.8L
- Porsche Panamera Diesel V6 3.0L (250Hp)
- Porsche Panamera S E-Hybrid V6 3.0L (416Hp)
- Porsche Panamera V6 3.0L 2WD (330 Hp)
- Porsche Panamera 4 V6 3.0L 4WD (330 Hp)
- Porsche Panamera 4 V6 3.0L 4WD Executive
- Porsche Panamera 4 3.0L Turbocharged V6 Sport Turismo
- Porsche Panamera 4S V6 3.0L 4WD (440 Hp)
- Porsche Panamera 4S V6 3.0L 4WD Executive
- Porsche Panamera 4S 2.9L Twin-Turbo V6 Sport Turismo
- Porsche Panamera 4S Diesel V8 4.0L 4WD (422 Hp)
- Porsche Panamera 4S Diesel 4.0L Twin-Turbo V8 Sport Turismo
- Porsche Panamera 4 E-Hybrid V6 2.9L 4WD
- Porsche Panamera 4 E-Hybrid V6 2.9L 4WD Executive
- Porsche Panamera 4 E-Hybrid 2.9L Twin-Turbo V6 Sport Turismo
- Porsche Panamera Turbo V8 4.0L 4WD (550 Hp)
- Porsche Panamera Turbo V8 4.0L 4WD Executive
- Porsche Panamera Turbo 4.0L Twin-Turbo V8 Sport Turismo
- Porsche Panamera Turbo S E-Hybrid V8 4.0L 4WD
- Porsche Panamera Turbo S E-Hybrid V8 4.0L 4WD Executive
- Porsche Panamera 2.9L V6
- Porsche Panamera 4 2.9L V6
- Porsche Panamera 4 Sport Turismo 2.9L V6
- Porsche Panamera 4S 2.9L V6
- Porsche Panamera 4S Sport Turismo 2.9L V6
- Porsche Panamera 4 E-Hybrid 2.9L V6
- Porsche Panamera 4 E-Hybrid Sport Turismo 2.9L V6
- Porsche Panamera 4S E-Hybrid 2.9L V6
- Porsche Panamera 4S E-Hybrid Sport Turismo 2.9L V6
- Porsche Panamera GTS 4.0L V8
- Porsche Panamera GTS Sport Turismo 4.0L V8
- Porsche Panamera Turbo S 4.0L V8
- Porsche Panamera Turbo S Sport Turismo 4.0L V8
- Porsche Panamera Turbo S E-Hybrid 4.0L V8
- Porsche Panamera Turbo S E-Hybrid Sport Turismo 4.0L V8
- Porsche Macan Petrol 2.0L 237Bhp
- Porsche Macan S Petrol 3.0L V6 340Bhp
- Porsche Macan S Diesel 3.0L V6 258Bhp
- Porsche Macan GTS Petrol 3.0L V6 360Bhp
- Porsche Macan Turbo 3.6L V6 400Bhp
- Porsche Macan Petrol 2.0L 245Bhp
- Porsche Macan S Petrol 3.0L V6 354Bhp
- Porsche Macan GTS Petrol 2.9L V6 380Bhp
- Porsche Macan Turbo 2.9L V6 440Bhp
- Porsche Macan Petrol 2.0L 265Bhp
- Porsche Macan T Petrol 2.0L 265Bhp
- Porsche Macan S Petrol 2.9L V6 380Bhp
- Porsche Macan
GTS Petrol 2.9L V6 440Bhp
The rear window wiper arm and rear wiper blade work as a pair to keep your rear windshield clean and clear.
- Wiper Arm - Connects to the wiper motor and applies the correct spring pressure to hold the blade against the glass.
- Wiper Blade - The rubber wiping edge that clears rain, dirt, and debris from the rear window.
Together, they ensure clear visibility in all weather conditions by wiping the glass smoothly and evenly.
Symptoms of Wear or Failure:
Wiper Blade Issues:
- Streaking or smearing on the glass
- Cracked, split, or hardened rubber
- Chattering, squeaking, or skipping across the window
- Wiper blade not sitting flush against the window
- Loose or floppy wiper movement
- Rust, corrosion, or visible damage on the arm
- Wiper not moving properly (slipping on the spindle)
- A worn blade reduces visibility and leaves streaks, making driving unsafe in rain or snow.
- A faulty arm means the blade won’t maintain proper contact, so even a new blade won’t wipe correctly.
- Replacing both together ensures your Porsche rear windscreen stays crystal clear.
Diagram Ref No 3 And 6
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
971955707AKIT
The product you are viewing cross references to these numbers
- Porsche 970.1 Panamera V6 3.6L 2WD 2009-13
- Porsche 970.1 Panamera 4 V6 3.6L 4WD 2009-13
- Porsche 970.1 Panamera S V8 4.8L 2009-13
- Porsche 970.1 Panamera 4S V8 4.8L 2009-13
- Porsche 970.1 Panamera GTS V8 4.8L 2011-13
- Porsche 970.1 Panamera Turbo V8 4.8L 2009-13
- Porsche 970.1 Panamera Turbo S V8 4.8L 2009-13
- Porsche 970.1 Panamera Diesel V6 3.0L 2011-13
- Porsche 970.1 Panamera S Hybrid V6 3.0L 2011-13
- Porsche 970.2 Panamera V6 3.6L 2WD (310Hp) 2014-16
- Porsche 970.2 Panamera 4 V6 3.6L 4WD (310Hp) 2014-16
- Porsche 970.2 Panamera S V6 Turbo 3.0L 2WD (420Hp) 2014-16
- Porsche 970.2 Panamera S V6 Turbo 3.0L 2WD Executive 2014-16
- Porsche 970.2 Panamera 4S V6 Turbo 3.0L 4WD (420Hp) 2014-16
- Porsche 970.2 Panamera 4S V6 Turbo 3.0L 4WD Executive 2014-16
- Porsche 970.2 Panamera GTS V8 4.8L 4WD (440Hp) 2014-16
- Porsche 970.2 Panamera Turbo V8 4.8L (520Hp) 2014-16
- Porsche 970.2 Panamera Turbo V8 Executive 2014-16
- Porsche 970.2 Panamera Turbo S V8 4.8L 2014-16
- Porsche 970.2 Panamera Diesel V6 3.0L (250Hp) 2014-16
- Porsche 970.2 Panamera S E-Hybrid V6 3.0L (416Hp) 2014-16
- Porsche 971.1 Panamera V6 3.0L 2WD (330 Hp) 2017-20
- Porsche 971.1 Panamera 4 V6 3.0L 4WD (330 Hp) 2017-20
- Porsche 971.1 Panamera 4 V6 3.0L 4WD Executive 2017-20
- Porsche 971.1 Panamera 4 3.0L Turbocharged V6 Sport Turismo 2017-20
- Porsche 971.1 Panamera 4S V6 3.0L 4WD (440 Hp) 2017-20
- Porsche 971.1 Panamera 4S V6 3.0L 4WD Executive 2017-20
- Porsche 971.1 Panamera 4S 2.9L Twin-Turbo V6 Sport Turismo 2017-20
- Porsche 971.1 Panamera 4S Diesel V8 4.0L 4WD (422 Hp) 2017-18
- Porsche 971.1 Panamera 4S Diesel 4.0L Twin-Turbo V8 Sport Turismo 2017-18
- Porsche 971.1 Panamera 4 E-Hybrid V6 2.9L 4WD 2017-20
- Porsche 971.1 Panamera 4 E-Hybrid V6 2.9L 4WD Executive 2017-20
- Porsche 971.1 Panamera 4 E-Hybrid 2.9L Twin-Turbo V6 Sport Turismo 2017-20
- Porsche 971.1 Panamera Turbo V8 4.0L 4WD (550 Hp) 2017-20
- Porsche 971.1 Panamera Turbo V8 4.0L 4WD Executive 2017-20
- Porsche 971.1 Panamera Turbo 4.0L Twin-Turbo V8 Sport Turismo 2017-20
- Porsche 971.1 Panamera Turbo S E-Hybrid V8 4.0L 4WD 2017-20
- Porsche 971.1 Panamera Turbo S E-Hybrid V8 4.0L 4WD Executive 2017-20
- Porsche 971.2 Panamera 2.9L V6 2021-23
- Porsche 971.2 Panamera 4 2.9L V6 2021-23
- Porsche 971.2 Panamera 4 Sport Turismo 2.9L V6 2021-23
- Porsche 971.2 Panamera 4S 2.9L V6 2021-23
- Porsche 971.2 Panamera 4S Sport Turismo 2.9L V6 2021-23
- Porsche 971.2 Panamera 4 E-Hybrid 2.9L V6 2021-23
- Porsche 971.2 Panamera 4 E-Hybrid Sport Turismo 2.9L V6 2021-23
- Porsche 971.2 Panamera 4S E-Hybrid 2.9L V6 2021-23
- Porsche 971.2 Panamera 4S E-Hybrid Sport Turismo 2.9L V6 2021-23
- Porsche 971.2 Panamera GTS 4.0L V8 2021-23
- Porsche 971.2 Panamera GTS Sport Turismo 4.0L V8 2021-23
- Porsche 971.2 Panamera Turbo S 4.0L V8 2021-23
- Porsche 971.2 Panamera Turbo S Sport Turismo 4.0L V8 2021-23
- Porsche 971.2 Panamera Turbo S E-Hybrid 4.0L V8 2021-23
- Porsche 971.2 Panamera Turbo S E-Hybrid Sport Turismo 4.0L V8 2021-23
- Porsche 95B.1 Macan Petrol 2.0L (237Bhp) 2014-18
- Porsche 95B.1 Macan S Petrol 3.0L V6 (340Bhp) 2014-18
- Porsche 95B.1 Macan S Diesel 3.0L V6 (258Bhp) 2014-18
- Porsche 95B.1 Macan GTS Petrol 3.0L V6 (360Bhp) 2014-18
- Porsche 95B.1 Macan Turbo 3.6L V6 (400Bhp) 2014-18
- Porsche 95B.2 Macan Petrol 2.0L (245Bhp) 2019-21
- Porsche 95B.2 Macan S Petrol 3.0L V6 (354Bhp) 2019-21
- Porsche 95B.2 Macan GTS Petrol 2.9L V6 (380Bhp) 2019-21
- Porsche 95B.2 Macan Turbo 2.9L V6 (440Bhp) 2019-21
- Porsche 95B.3 Macan Petrol 2.0L (265Bhp) 2022>>
- Porsche 95B.3 Macan T Petrol 2.0L (265Bhp) 2022>>
- Porsche 95B.3 Macan S Petrol 2.9L V6 (380Bhp) 2022>>
- Porsche 95B.3 Macan GTS Petrol 2.9L V6 (440Bhp) 2022>>
Shop Securely
12 Month Warranty
Worldwide Delivery
Speed ABS / Sensor Harness Repair Kit, FRONT.
Fits:
Porsche 987 Boxster MKI 2005>>2008
Porsche 987 Boxster MKII 2009>>2012
Porsche 987 Cayman MKI 2006>>2008
Porsche 987 Cayman MKII 2009>>2012
Porsche 997.1 Carrera 2 / 2S MKI 2005>>2008
Porsche 997.2 Carrera 2 / 2S MKII 2009>>2012
Porsche 997 GT3 MKI / MKII 2007>>2011
One of the most common problems ABS/PASM light coming on and it says it is the right front sensor with a reading out of range. If you switched the left front and right front sensors and still getting the same fault code. Next course of action is going to be to replace the wiring going to the sensor since assuming there is a break in the wires or a short.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99761296
The product you are viewing cross references to these numbers
- Porsche Boxster 987 2.7L 2005-08/08
- Porsche Boxster 987 S 3.2/3.4L 2005-08/08
- Porsche Boxster 987 MKII 2.9L 2009-12
- Porsche Boxster S 987 MKII 3.4L 2009-12
- Porsche 997 MK1 Carrera 2 3.6L 2005-08
- Porsche 997 MK1 Carrera 2S 3.8L 2005-08
- Porsche 997 MK1 GT3 2007-09
- Porsche 997 MKII Carrera C2 3.6L 2009-12
- Porsche 997 MKII Carrera C2S 3.8L 2009-12
- Porsche 997 MKII GT3 2010-11
- Porsche Cayman 2.7L 987C 2006-08
- Porsche Cayman S 3.4L 987C 2005-08
- Porsche Cayman 2.9L 987C MKII 2009-12
- Porsche Cayman S / R 3.4L 987C MKII 2009-12
Shop Securely
12 Month Warranty
Worldwide Delivery
Fits:
Porsche 987 Boxster MKI 2005>>2008
Porsche 987 Boxster MKII 2009>>2012
Porsche 987 Cayman MKI 2006>>2008
Porsche 987 Cayman MKII 2009>>2012
One of the most common problems is ABS/PASM light coming on and it says it is the right front sensor with a reading out of range. If you switched the left front and right front sensors and still getting the same fault code. Next course of action is going to be to replace the wiring going to the sensor since assuming there is a break in the wires or a short.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
98761296
The product you are viewing cross references to these numbers
- Porsche Boxster 987 2.7L 2005-08/08
- Porsche Boxster 987 S 3.2/3.4L 2005-08/08
- Porsche Boxster 987 MKII 2.9L 2009-12
- Porsche Boxster S 987 MKII 3.4L 2009-12
- Porsche Cayman 2.7L 987C 2006-08
- Porsche Cayman S 3.4L 987C 2005-08
- Porsche Cayman 2.9L 987C MKII 2009-12
- Porsche Cayman S / R 3.4L 987C MKII 2009-12
Shop Securely
12 Month Warranty
Worldwide Delivery
This clutch pedal switch sits behind the clutch pedal and communicates pedal position to the vehicle’s electrical systems. When the clutch pedal is depressed or released, it relays that signal to the starter, cruise control, PSM (Porsche Stability Management), and other relevant systems that depend on clutch position information. Designed to match the original part’s electrical characteristics, housing, and fitment, it installs into the factory mounting point without modification.
Sold Each.
Fits:
Porsche 986 Boxster 1997 - 2004 (M249 / M454)
Porsche 987 Boxster MKI & MKII 2005 - 2012
Porsche 987C Cayman MKI & MKII 2005 - 2012
Porsche 996 C2 / C4 >>1999 (M454)
Porsche 996 C2 / C4 / C4S 2000 - 2005
Porsche 996 Turbo 2001 - 2005 (M454)
Porsche 996 GT3 1999 - 2005
Porsche 997 Carrera MKI 2005 - 2008 (I480)
Porsche 997 Carrera MKII 2009 - 2012
Porsche 997 Turbo MKI & MKII 2007 - 2013
Porsche 997 GT3 2007 - 2011
* M249 - Tiptronic Transmission
* M454 - Automatic Speed Control
* I480 - 6-Speed Manual Transmission
Diagram Ref No 17
The clutch pedal switch ensures the vehicle can only be started when the clutch is depressed, enhances safety by providing input to cruise control and transmission logic, and informs stability and traction systems of clutch engagement status. A properly functioning switch prevents starter engagement unless conditions are safe and contributes to smooth operation of related vehicle functions.
Function:
As a microswitch mounted near the clutch pedal, this part closes and opens its contact in sync with pedal travel. That change in contact state is interpreted by the vehicle’s ECU and safety systems, enabling starter activation, cancelling cruise when appropriate, and helping ensure proper control logic throughout the driveline. Its OE-match design ensures consistent signal quality and long service life in typical operating environments.
A failed clutch pedal switch can prevent the engine from starting, inhibit cruise control function, trigger false warnings, or interfere with stability control inputs. Because it’s a safety-critical sensor tied to multiple control systems, replacing a worn, intermittent, or failed switch with an OE Match part ensures proper system response and restores reliable interface between the clutch and vehicle electronics.
When to replace:
• Engine won’t start unless specific clutch pedal positions are met
• Cruise control doesn’t engage or disengages unexpectedly
• Clutch position signal feels intermittent or inconsistent
• Dashboard warnings related to clutch/safety logic
• During clutch or pedal assembly service
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99661311402
The product you are viewing cross references to these numbers
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche Boxster 987 2.7L 2005-08/08
- Porsche Boxster 987 S 3.2/3.4L 2005-08/08
- Porsche Boxster 987 MKII 2.9L 2009-12
- Porsche Boxster S 987 MKII 3.4L 2009-12
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 997 MK1 Carrera 2 3.6L 2005-08
- Porsche 997 MK1 Carrera 2S 3.8L 2005-08
- Porsche 997 MK1 Carrera 4 3.6L 2005-08
- Porsche 997 MK1 Carrera 4S 3.8L 2005-08
- Porsche 997 MK1 TURBO 2007-09
- Porsche 997 MK1 GT3 2007-09
- Porsche 997 MKII Carrera C2 3.6L 2009-12
- Porsche 997 MKII Carrera C4 3.6L 2009-12
- Porsche 997 MKII Carrera C2S 3.8L 2009-12
- Porsche 997 MKII Carrera C4S 3.8L 2009-12
- Porsche 997 MKII GT3 2010-11
- Porsche 997 MKII Turbo 2010-13
- Porsche Cayman 2.7L 987C 2006-08
- Porsche Cayman S 3.4L 987C 2005-08
- Porsche Cayman 2.9L 987C MKII 2009-12
- Porsche Cayman S / R 3.4L 987C MKII 2009-12
Shop Securely
12 Month Warranty
Worldwide Delivery
.jpeg){kind=link}
.jpg){kind=link}
Fits:
Porsche 987.2 Boxster / Boxster S 2009>>2012
Porsche 987.2 Cayman / Cayman S 2009>>2012
Diagram Ref No 18
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
98710650131
The product you are viewing cross references to these numbers
- Porsche Boxster 987 MKII 2.9L 2009-12
- Porsche Boxster S 987 MKII 3.4L 2009-12
- Porsche Cayman 2.9L 987C MKII 2009-12
- Porsche Cayman S / R 3.4L 987C MKII 2009-12
Shop Securely
12 Month Warranty
Worldwide Delivery
Monday-Friday: 8.30am - 5.30pm (GMT)
Saturday: Closed
Sunday: Closed