Nordlicht

What does HID Stand for?
HID stands for High Intensity Discharge. The term xenon is comes from the type of gas that is found inside the bulb.

The HID system consists of 3 parts
2 Xenon bulbs 2 Electronic ballasts 2 Built-in Igniters (they are inside the ballast).

What advantages are there with HID compared to Halogen Bulbs?
There are many advantages to HID. 1/3 less power consumption . Xenon lamps are only 35 watts. The ballasts only draw 1.2 amps of power! This puts a much lower strain on the cars electrical system. Frees up more power to power other goodies, such as audio equipment 3 times the light output: No halogen bulb can even come close to the output of a normal HID light. More light output if you do Stage 2 Safety and Visibility. More visibility equals more nighttime safety. Much more powerful than halogen, HID allows you to see farther and brighter during nighttime driving. Plus, HID approximates the temperature of sunlight, so objects appear more real.

Installation.... What is involved?
Installation of HID is not very difficult or time consuming. You need some very basic mechanic skills and a little time. Detailed Instructions are included in every kit. Installation for Xenon kits should be fitted by an engineer / auto electictian. In a nutshell, simply insert the HID light in the light housing, find a suitable location for the ballasts and run 1 wire to the bulb connect the factory harness to the ballast.

This HID conversion kit cannot be approved for road
use unless automatic levelling and washing systems are installed.

How to install: CLICK HERE

Twin Beam H4 gas discharge bulb will be Xenon in high and low beam

Interior Lamp / Light. LED Pad with adaptors.

Brighten up the interior of your car. These SMD blocks bring the modern LED look to the inside of your car. They can be used in all the interior and boot spaces.

This product comes complete with interchangeable base adapters, T10/ BA9S and FESTOON to suit all denominations.

Simply remove and replace the existing halogen bulb, with the correct base adapter, attach to the SMD pod and you are done.

CHECK THAT IT WILL FIT IN THE SPACE
* Size – 32mm Length x 20mm Width
* Brilliant white light.
* Sold in single unit set

Please check your bulb type & fitment before ordering as these LED bulbs fit multiple vehicles

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90063110690LED

The product you are viewing cross references to these numbers

Number Plate Light Bulbs (PAIR). High Power LED Festoon 39mm long
This LED bulbs set replaces the dull yellow number plate bulbs.

* No on board error messages.
* 3 SMD LED - 180 degree coverage
* Reverse polarity protection.

Fits:
Porsche 964 1989-94
Porsche 993 1994-98
Porsche 986 Boxster 1997-02
Porsche 968 1992-95
Porsche 996

Price is for a Pair
Please check your bulb type & fitment before ordering as these LED bulbs fit multiple vehicles
(Bulbs only number plate unit not included)

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90063110590LED

The product you are viewing cross references to these numbers

Daytime running Lights (DRL Look) SET OF 2
Fits:

• Porsche 997 TURBO 2007>>
• Porsche 997 GT2 2007>>
• Porsche 997 MKII Turbo 2009>>
• Porsche 997 MKII GT2 RS 2011>>

New design LED daytime running lamps for Porsche 997 Carrera MKI (Just like the 997 MKII versions have from the factory.), Porsche 997 Turbo and new shape Porsche 957 Cayenne. Low energy LED lamps will automatically activate when the engine starts.



As well as looking great on the vehicle it seems that the EC has since decided to adopt a draft directive that will require all new types of cars and small delivery vans to be equipped with dedicated, low energy consumption DRLs, activated automatically when the engine starts.

The daytime running lamps will go off while indicating and come on again when you stop indicating

These units do not require any control modules they are "Plug & Play", you just need some wiring to the fuse box to make the DRL work.

LED rear lights / taillights converter Module 997.1 to 997.2 LED Lights - European / RoW Conversion Control Units

These control units should be used when converting 997 MKI to the later style 997 MKII look with the new LED REAR LAMPS. These control units will make the new LED lamps function.

For LHD rear lamps the lug on side of plug connection will require removal in order for the plugs to fit.

For more information about fitting conversions Click Here

Indicator Unit Rear Clear/Red with Leds

SET OF 2


Upgrade the old style amber rear lamps with the new CLEAR & RED light set with LED lamps.

Fits:
Porsche 986 Boxster 1997-04

For Fitting & Troubleshooting Guide: CLICK HERE

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

00004490999

The product you are viewing cross references to these numbers

What does HID Stand for?
HID stands for High Intensity Discharge. The term xenon is comes from the type of gas that is found inside the bulb.

The HID system consists of 3 parts
2 Xenon bulbs 2 Electronic ballasts 2 Built-in Igniters (they are inside the ballast).

What advantages are there with HID compared to Halogen Bulbs?
There are many advantages to HID. 1/3 less power consumption . Xenon lamps are only 35 watts. The ballasts only draw 1.2 amps of power! This puts a much lower strain on the cars electrical system. Frees up more power to power other goodies, such as audio equipment 3 times the light output: No halogen bulb can even come close to the output of a normal HID light. More light output if you do Stage 2 Safety and Visibility. More visibility equals more nighttime safety. Much more powerful than halogen, HID allows you to see farther and brighter during nighttime driving. Plus, HID approximates the temperature of sunlight, so objects appear more real.

Installation.... What is involved?
Installation of HID is not very difficult or time consuming. You need some very basic mechanic skills and a little time. Detailed Instructions are included in every kit. Installation for Xenon kits should be fitted by an engineer / auto electictian. In a nutshell, simply insert the HID light in the light housing, find a suitable location for the ballasts and run 1 wire to the bulb connect the factory harness to the ballast.

This HID conversion kit cannot be approved for road
use unless automatic levelling and washing systems are installed.

Winter Offer

For Fitting Instructions Please Click Here

What does HID Stand for?
HID stands for High Intensity Discharge. The term xenon is comes from the type of gas that is found inside the bulb.

The HID system consists of 3 parts
2 Xenon bulbs 2 Electronic ballasts 2 Built-in Igniters (they are inside the ballast).

What advantages are there with HID compared to Halogen Bulbs?
There are many advantages to HID. 1/3 less power consumption . Xenon lamps are only 35 watts. The ballasts only draw 1.2 amps of power! This puts a much lower strain on the cars electrical system. Frees up more power to power other goodies, such as audio equipment 3 times the light output: No halogen bulb can even come close to the output of a normal HID light. More light output if you do Stage 2 Safety and Visibility. More visibility equals more nighttime safety. Much more powerful than halogen, HID allows you to see farther and brighter during nighttime driving. Plus, HID approximates the temperature of sunlight, so objects appear more real.

Installation.... What is involved?
Installation of HID is not very difficult or time consuming. You need some very basic mechanic skills and a little time. Detailed Instructions are included in every kit. Installation for Xenon kits should be fitted by an engineer / auto electictian. In a nutshell, simply insert the HID light in the light housing, find a suitable location for the ballasts and run 1 wire to the bulb connect the factory harness to the ballast.

This HID conversion kit cannot be approved for road
use unless automatic levelling and washing systems are installed.

For CAN Bus Equipped Vehicles

For Fitting Instructions Please Click Here

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

999000HIDH7

The product you are viewing cross references to these numbers

What does HID Stand for?
HID stands for High Intensity Discharge. The term xenon is comes from the type of gas that is found inside the bulb.

The HID system consists of 3 parts
2 Xenon bulbs 2 Electronic ballasts 2 Built-in Igniters (they are inside the ballast).

What advantages are there with HID compared to Halogen Bulbs?
There are many advantages to HID. 1/3 less power consumption . Xenon lamps are only 35 watts. The ballasts only draw 1.2 amps of power! This puts a much lower strain on the cars electrical system. Frees up more power to power other goodies, such as audio equipment 3 times the light output: No halogen bulb can even come close to the output of a normal HID light. More light output if you do Stage 2 Safety and Visibility. More visibility equals more nighttime safety. Much more powerful than halogen, HID allows you to see farther and brighter during nighttime driving. Plus, HID approximates the temperature of sunlight, so objects appear more real.

Installation.... What is involved?
Installation of HID is not very difficult or time consuming. You need some very basic mechanic skills and a little time. Detailed Instructions are included in every kit. Installation for Xenon kits should be fitted by an engineer / auto electictian. In a nutshell, simply insert the HID light in the light housing, find a suitable location for the ballasts and run 1 wire to the bulb connect the factory harness to the ballast.

This HID conversion kit cannot be approved for road
use unless automatic levelling and washing systems are installed.

For Fitting Instructions Please Click Here

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

HIDH7PRO6K

The product you are viewing cross references to these numbers