Fabspeed

Fabspeed Complete high performance exhaust system provides loud & aggressive CUP car sound with dual outlets



FEATURES:
• Fits all Porsche 911 Carrera vehicles (1976-1989) WITHOUT HEAT
• Major improvement in power throughout the RPM range.
• Saves 43 lbs from the rear of the vehicle
• Loud and aggressive Cup car sound. Recommended for Track Use ONLY!
• Constructed from high quality 14-16 gauge, C.N.C. mandrel bent T304 stainless steel tubing
• RSR Long-tube headers feature equal length primary pipes with F1 style high velocity 3-into-1 pyramidal investment cast merge collectors
• Dual outlet system comes with all required hardware
• Available options include Heat Exchange, Sportcats &/or Tip

• All Fabspeed performance products are backed by the Fabspeed Lifetime Limited Warranty

NOTE: Requires slight modification to the factory rear bumper for proper fitment of the second outlets

INSTALLATION NOTE: To ensure proper header seal, after initial heat cycle, tighten all exhaust bolts to the OEM torque specs.

Please note: This is a special-order item manufactured to order. In some cases, please allow 4 – 5 weeks for the delivery. Special order items cannot be cancelled from this supplier once your order has been placed.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

FSPOR911RSRWOH

The product you are viewing cross references to these numbers

Valvetronic GT3 Muffler Conversion Kit.



Porsche Boxster Cayman owners have requested a conversion kit that allows the installation of a Porsche OEM 991 GT3 center muffler onto their cars. Fabspeed Motorsport listened and designed in CAD and built inhouse a lightweight installation kit that allows any 6 speed Porsche 981 GT4 or Spyder owner to install an OEM GT3 center muffler (A PDK version will also be available once we are able to test fitment). This kit also allows the installation of a Fabspeed 991 GT3 Center Muffler Bypass Pipe or 991 GT3 Center Mini Maxflo Performance Exhaust onto your 981 GT4/Spyder.

The system consists of 2.5" 63.5mm CNC mandrel bent one piece Left and Right side over axle pipes and clamps. Then a set of valved side muffler inlet Y-pipes that retain the factory PSE valved exhaust functionality. The valves are OEM Porsche GT3 HELICAL vacuum-actuated exhaust valves that are imported from the U.K. We use our FLOW Waterjet to cut a CAD designed, lightweight, stainless steel mounting bracket to hold the muffler; hardware for installation is included. This and the Factory Porsche muffler band straps hold everything in place. For tips, you can use the factory 991 GT3 tips or you can order our custom exhaust tip mount with any choice of our signature tips.

SOUND: Enjoy the characteristic sound of a factory Porsche engineered exhaust but with a nice increase in volume! With PSE off (valves closed), the exhaust is still tame and livable in the cabin. However, with PSE on (valves open) hear that flat 6 howl up to redline! The larger over axle pipes that are included also contribute to the overall louder tone.

POWER: The 991 GT3 muffler was designed by Porsche to support 475 HP, because of this it flows a lot better than the 981 GT4 muffler that was only designed for 385 HP. We expect this increase in flow, helped by our larger over axle pipes and muffler inlets, to give a nice HP increase.

FEATURES:

• Fits all 6 speed manual Porsche 981 Cayman GT4 / 981 Boxster Spyder vehicles (2015-2016). A PDK version will also be available once we are able to test fitment
• Choose between your choice of Premium Fabspeed Exhaust Tips or use OEM 991 GT3 Tips.
• CNC Mandrel bent 2.5" 63.5 precision over axle pipes to valvetronic inlet pipes
• Helical Aerospace United Kingdom exhaust valves- same OEM quality valves used on Porsche GT3, GT3RS. Made with Silica carbide.
• Constructed from 14-16ga T304L stainless steel tubing for maximum power and durability
• Direct bolt-on installation; no cutting or welding required
• All Fabspeed performance products are backed by the Fabspeed Lifetime Limited Warranty.

NOTE: OEM GT3 center muffler is NOT included

Please note: This is a special-order item manufactured to order. In some cases, please allow 4 – 5 weeks for the delivery. Special order items cannot be cancelled from this supplier once your order has been placed.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

FSPOR981GT4GT3CK

The product you are viewing cross references to these numbers

Fabspeed Cat-back valvetronic Maxflo exhaust system.



SOUND:

With PSE on and valves open, the Valvetronic exhaust really opens up your Carrera's exhaust, serving up the classic flat 6 exhaust note that is missing from the factory. Get a deep tone and aggressive pops on downshift in sport mode as well as turbo spool sounds. With PSE off and the valves closed the exhaust note is tame and totally drone-free. In-cabin conversations are just as easy as they were with the stock exhaust.

FEATURES:

• Fits all 992 Carrera/Targa/Cabriolet Base/S/GTS vehicles Worldwide 2019+ 
• Completely retains PSE valved exhaust functionality 
• Uses aerospace quality Helical Limited exhaust valves imported from the U.K.
• This cat-back system is emissions legal in all 50 states and the rest of the world (ROW)
• This exhaust system will have no effect on the factory warranty
• Constructed from CNC mandrel-bent 14-16 gauge T304L stainless steel
• Laser scanned and CAD designed for perfect OEM fitment using an Ametek Handyscan 700
• Simple DIY (Do-It-Yourself) bolt-on installation, no cutting or welding required
• Compatible with OEM Porsche catalytic converters and Fabspeed Sport Catalytic Converters
• Increased exotic Twin Turbocharged Porsche sports car sound
• All Fabspeed performance products are backed by the Fabspeed Lifetime Warranty

NOTE:

• Please use this guide to select the correct OEM tip style

Please note: This is a special-order item manufactured to order. In some cases, please allow 4 – 5 weeks for the delivery. Special order items cannot be cancelled from this supplier once your order has been placed.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

FSPOR992VLV

The product you are viewing cross references to these numbers

Fabspeed Muffler bypass exhaust system
Race - Catbypass Pipes



Very aggressive "straight-pipe" system which replaces/bypasses the factory exhaust with a non-restrictive bypass solution available for STREET or RACE applications.

FEATURES:

• Fits all Porsche 997 Turbo vehicles (2006-2009)
• Available in a Street or Race Configuration (Includes either 200-Cell HJS Sport Cats for the STREET or Catbypass Pipes for the RACE)
• Saves 45lbs from the rear of the vehicle
• Optimized for maximum performance with NO check engine light, guaranteed (STREET)
• Includes Deluxe Quad Style Tips in your choice of finish.
• Constructed from high-quality 14-16 gauge C.N.C. mandrel-bent T304L stainless steel for optimum flow and maximum durability
• Direct bolt-on replacement for the factory exhaust
• All Fabspeed performance products are backed by the Fabspeed Lifetime Warranty

Why We Choose HJS Catalytic Converters:

HJS German imported catalytic converters are made from some of the highest grade materials you can find in a catalytic converter. This yields high performance gains and longevity so it wont deteriorate over time like lower grade catalytic converters. These catalytic converters flow up to 93-95% of a straight pipe in most applications. The benefit is that you get the "straight pipe sound" while still being able to provide enough emissions scrubbing to prevent a check engine light.

Please note: This is a special-order item manufactured to order. In some cases, please allow 4 – 5 weeks for the delivery. Special order items cannot be cancelled from this supplier once your order has been placed.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

FSPOR997TMBCB

The product you are viewing cross references to these numbers

Fabspeed Muffler bypass exhaust system
Street - Includes 200-Cell HJS Sport Cats



Very aggressive "straight-pipe" system which replaces/bypasses the factory exhaust with a non-restrictive bypass solution available for STREET or RACE applications.

FEATURES:

• Fits all Porsche 997 Turbo vehicles (2006-2009)
• Available in a Street or Race Configuration (Includes either 200-Cell HJS Sport Cats for the STREET or Catbypass Pipes for the RACE)
• Saves 45lbs from the rear of the vehicle
• Optimized for maximum performance with NO check engine light, guaranteed (STREET)
• Includes Deluxe Quad Style Tips in your choice of finish.
• Constructed from high-quality 14-16 gauge C.N.C. mandrel-bent T304L stainless steel for optimum flow and maximum durability
• Direct bolt-on replacement for the factory exhaust
• All Fabspeed performance products are backed by the Fabspeed Lifetime Warranty

Why We Choose HJS Catalytic Converters:

HJS German imported catalytic converters are made from some of the highest grade materials you can find in a catalytic converter. This yields high performance gains and longevity so it wont deteriorate over time like lower grade catalytic converters. These catalytic converters flow up to 93-95% of a straight pipe in most applications. The benefit is that you get the "straight pipe sound" while still being able to provide enough emissions scrubbing to prevent a check engine light.

Please note: This is a special-order item manufactured to order. In some cases, please allow 4 – 5 weeks for the delivery. Special order items cannot be cancelled from this supplier once your order has been placed.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

FSPOR997TMBSC

The product you are viewing cross references to these numbers

Fabspeed Maxflo Performance Exhaust System for Porsche 997 Turbo Cabrio / Tiptronic (2006-2009)

Sound Level: Mild



Fabspeed's Maxflo Performance Exhaust System is the perfect exhaust upgrade for someone who is looking for a more sportier sports car sound without being overbearing for street driving; available in either Sport or Mild exhaust tones.
Having two different muffler designs allows us provide a free-flowing design that produces horsepower and torque but can also provide two slightly different exhaust sounds. Which gives the ability to offer the end user a choice between a slightly louder sportier sound and a slightly more mild sound. From our years of experience and working with the owners of these cars, we have noticed a few things that will help you make your decision a little easier on the sound option. Most vehicle owners with a Manual Gearbox and Coupe model found the Sport version a better fit for their car and the Tiptronic / Cabriolet owners preferred the Mild version a better fit for vehicles with the open top and automatic transmissions for better sound control.

FEATURES:
• Fits all Porsche 997 Turbo vehicles Coupe / Manual (2006-2009)
• Increases horsepower and torque by 26 whp and 31 ft-lbs
• Saves weight from the rear of the vehicle
• Includes 200-cell HJS Sport Catalytic Converters
• Optimized for maximum performance with NO check engine light, guaranteed
• Constructed from high-quality 14-16 gauge C.N.C. mandrel-bent T304L stainless steel for optimum flow and maximum durability
• Direct bolt on installation for factory muffler system
• All Fabspeed performance products are backed by the Fabspeed Lifetime Warranty

Please note: This is a special-order item manufactured to order. In some cases, please allow 4 – 5 weeks for the delivery. Special order items cannot be cancelled from this supplier once your order has been placed.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

FSPOR997TMAXM

The product you are viewing cross references to these numbers

Fabspeed Maxflo Performance Exhaust System for Porsche 997 Turbo Coupe / Manual (2006-2009)

Sound Level: Sport



Fabspeed's Maxflo Performance Exhaust System is the perfect exhaust upgrade for someone who is looking for a more sportier sports car sound without being overbearing for street driving; available in either Sport or Mild exhaust tones.
Having two different muffler designs allows us provide a free-flowing design that produces horsepower and torque but can also provide two slightly different exhaust sounds. Which gives the ability to offer the end user a choice between a slightly louder sportier sound and a slightly more mild sound. From our years of experience and working with the owners of these cars, we have noticed a few things that will help you make your decision a little easier on the sound option. Most vehicle owners with a Manual Gearbox and Coupe model found the Sport version a better fit for their car and the Tiptronic / Cabriolet owners preferred the Mild version a better fit for vehicles with the open top and automatic transmissions for better sound control.

FEATURES:
• Fits all Porsche 997 Turbo vehicles Coupe / Manual (2006-2009)
• Increases horsepower and torque by 26 whp and 31 ft-lbs
• Saves weight from the rear of the vehicle
• Includes 200-cell HJS Sport Catalytic Converters
• Optimized for maximum performance with NO check engine light, guaranteed
• Constructed from high-quality 14-16 gauge C.N.C. mandrel-bent T304L stainless steel for optimum flow and maximum durability
• Direct bolt on installation for factory muffler system
• All Fabspeed performance products are backed by the Fabspeed Lifetime Warranty

Please note: This is a special-order item manufactured to order. In some cases, please allow 4 – 5 weeks for the delivery. Special order items cannot be cancelled from this supplier once your order has been placed.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

FSPOR997TMAXS

The product you are viewing cross references to these numbers

Fabspeed's Supersport X-Pipe RACE application includes catbypass pipes with O2 bungs in the factory position, and is recommended for Off-Road Track Use Only



Aggressive X-Pipe exhaust which runs from the turbo outlets to the tips. (Louder then the Maxflo System, but not as loud as Muffler Bypass System).

FEATURES:
• Fits Fits all Porsche 997 Turbo vehicles (2006-2009)
• Includes 200-cell HJS Sport Cats for maximum flow and performance
• Includes Deluxe Quad Style Tips in your choice of finish
• Constructed from high-quality 14-16 gauge C.N.C. mandrel-bent T304L stainless steel for optimum flow and maximum durability
• Direct replacement for factory muffler system
• All Fabspeed performance products are backed by the Fabspeed Lifetime Warranty

Sport Catalytic Converter (STREET) - This product removes the OEM catalytic converters from the vehicle, and as such, is strictly intended for closed track events and off-road use only. This product contains a High-Flow Sport Catalytic Converter solely intended for track and race cars as it is NOT California Air Resources Board Certified and not EPA certified. You are hereby informed and warned to check your local, state, and federals laws before buying and installing these or any aftermarket parts to be sure whether usage is in violation. All installation-risk and use-risk is borne by the end-user and installer of these parts.

Why We Choose HJS Catalytic Converters:

HJS German imported catalytic converters are made from some of the highest grade materials you can find in a catalytic converter. This yields high performance gains and longevity so it wont deteriorate over time like lower grade catalytic converters. These catalytic converters flow up to 93-95% of a straight pipe in most applications. The benefit is that you get the "straight pipe sound" while still being able to provide enough emissions scrubbing to prevent a check engine light.

Please note: This is a special-order item manufactured to order. In some cases, please allow 4 – 5 weeks for the delivery. Special order items cannot be cancelled from this supplier once your order has been placed.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

FSPOR997TSSRX

The product you are viewing cross references to these numbers

Fabspeed's Supersport X-Pipe STREET application includes high performance 200-cell HJS Sport Catalytic Converters for improved flow and exhaust sound



Aggressive X-Pipe exhaust which runs from the turbo outlets to the tips. (Louder then the Maxflo System, but not as loud as Muffler Bypass System).

FEATURES:
• Fits Fits all Porsche 997 Turbo vehicles (2006-2009)
• Includes 200-cell HJS Sport Cats for maximum flow and performance
• Optimized for maximum performance with NO catalyst generated check engine light, guaranteed (STREET)
• Includes Deluxe Quad Style Tips in your choice of finish
• Constructed from high-quality 14-16 gauge C.N.C. mandrel-bent T304L stainless steel for optimum flow and maximum durability
• Direct replacement for factory muffler system
• All Fabspeed performance products are backed by the Fabspeed Lifetime Warranty

Sport Catalytic Converter (STREET) - This product removes the OEM catalytic converters from the vehicle, and as such, is strictly intended for closed track events and off-road use only. This product contains a High-Flow Sport Catalytic Converter solely intended for track and race cars as it is NOT California Air Resources Board Certified and not EPA certified. You are hereby informed and warned to check your local, state, and federals laws before buying and installing these or any aftermarket parts to be sure whether usage is in violation. All installation-risk and use-risk is borne by the end-user and installer of these parts.

Why We Choose HJS Catalytic Converters:

HJS German imported catalytic converters are made from some of the highest grade materials you can find in a catalytic converter. This yields high performance gains and longevity so it wont deteriorate over time like lower grade catalytic converters. These catalytic converters flow up to 93-95% of a straight pipe in most applications. The benefit is that you get the "straight pipe sound" while still being able to provide enough emissions scrubbing to prevent a check engine light.

Please note: This is a special-order item manufactured to order. In some cases, please allow 4 – 5 weeks for the delivery. Special order items cannot be cancelled from this supplier once your order has been placed.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

FSPOR997TSSSX

The product you are viewing cross references to these numbers

Fabspeed Exhaust center muffler bypass X-pipe.



The 997.2 Carrera Center Muffler Bypass X-Pipe makes a great compliment to either the factory side mufflers or to Fabspeed's Maxflo Performance Side Exhaust System. It improves exhaust tone and saves weight by replacing the factory center muffler with a lightweight x-pipe.

POWER:

You'll experience a nice seat of the pants power gain. We saw peak gains of 12 whp and 15 ft-lbs.

SOUND:

Without PSE: A subtle improvement, with a throatier, deeper exhaust note. A perfect first exhaust upgrade for your Carrera. Combine with our Maxflow Performance Side Exhaust System for the perfect level of volume and a refined sports car sound.

With PSE: A great delta between valves closed and open. With valves open and the side mufflers allowed to channel through the free flowing CMBP, the exhaust offers a race like, brilliant exhaust note. Very aggressive, noticeable burbles and crackles. With valves closed, return to a refined, non droning civil level of exhaust tone.

FEATURES:

• Fits all Porsche 997.2 Carrera vehicles (2009-2012) (2012 was a split model year, a 2012 911 Carrera could be either a 997.2 or 991, please verify if your car is a 997.2 or a 991 before purchase)
• Improves horsepower and torque by 12 whp and 15 ft-lbs
• Saves 5 lbs. versus the factory center muffler
• Constructed from high-quality .065" thick C.N.C. mandrel-bent T304L stainless steel for optimum flow and maximum durability
• Direct bolt-on replacement for the factory center muffler
• All Fabspeed performance products are backed by the Fabspeed Lifetime Warranty

Please note: This is a special-order item manufactured to order. In some cases, please allow 4 – 5 weeks for the delivery. Special order items cannot be cancelled from this supplier once your order has been placed.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

FSPOR9972CMBPX

The product you are viewing cross references to these numbers

Fabspeed link comp. pipe.



DESCRIPTION:

Increase exhaust flow by replacing the restrictive factory catalytic converter with a much less restrictive straight-through pipe for maximum flow and performance. Unlock your vehicles potential performance and engine response with maximum turbo spool and improved efficiency, while creating an exciting and aggressive exhaust tone.

The portion of the exhaust that contains the catalyst is a rather large component, making a full replacement section costly. Our design incorporates a Torca clamp for easy installation into the factory double walled exhaust configuration - cutting is required for installation. The system can be reverted back to stock at any time utilizing the same clamp.

FEATURES:

• Fits all Porsche 718 Boxster/Cayman Base/S Models 2017+ and GTS Models 2017-2020 Worldwide
• Improves power, sound, and throttle response by decreasing back pressure and increasing exhaust flow
• Constructed from high-quality .065" thick T304L stainless steel for optimum flow and maximum durability
• Designed and built in-house at Fabspeed in our full precision machine shop
• Includes integrated O2 sensor bung in factory location
• Included Torca clamp allows for re-installation of factory catalyst at any time
• Optional 02 spacers available that may help to prevent triggering the Check Engine Light
• Fabspeed performance products are backed by Fabspeed's Lifetime Warranty

NOTE: Cutting of the factory exhaust pipe is required, but is simple and reversible at any time. Please see our Installation Instructions to gauge your ability to perform the installation. If you have any doubts - please contact us for a referral to your local Fabspeed dealer / installation center.

DISCLAIMER: This product removes the OEM catalytic converters from the vehicle, and as such, is strictly intended for closed track events and off-road use only, never to be driven on public roads. This product is or contains a Racing Cat Bypass Pipe, which will give you check engine lights on OBD2 cars. Racing Cat Bypass Pipes are solely intended for track and race cars as they are NOT California Air Resources Board Certified (CARB) and not EPA certified. You are hereby informed and warned to check your local, state, and federal laws before buying and installing these or any aftermarket parts to be sure whether usage is in violation. All installation-risk and use-risk is borne by the end-user and installer of these parts.

Purchase Disclaimer: Fabspeed Motorsport does not condone the use of emission defeat devices for any vehicles used on public streets or roadways. Fabspeed Motorsport will not tamper, remove, disable, or bypass emissions equipment on a motor vehicle in accordance with 40 CFR Section 86.1854.12(a)(3), Clean Air Act 40 CFR 1068.101(b). This includes software, known as tunes, that reprogram a motor vehicles electronic control module to alter engine performance and enable the removal of filters, catalysts, and other critical emissions controls.

Please note: This is a special-order item manufactured to order. In some cases, please allow 4 – 5 weeks for the delivery. Special order items cannot be cancelled from this supplier once your order has been placed.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

FSPOR718CB

The product you are viewing cross references to these numbers

Fabspeed Header Muffler Kit WITH Heat Exchange



Fits : all Porsche 993 Carrera vehicles 1994-1998 - 3.6L / 3.8L and engines

Fabspeed's RSR Header Muffler Kit is a full exhaust system developed for track use provides an aggressive exhaust note while adding horsepower, torque, and throttle response; available as single or dual outlet and with or without heat exchange. Works great on street cars too. This Header/Muffler kit is built from the ground up to optimize performance for the Porsche 993 Carrera. Beyond just improving horsepower, torque, and throttle response, this package will also reduce the overall weight of your car by 43 pounds, which improves handling and acceleration.

SOUND:

This kit is designed specifically for use on the track, but works well for street drivers who want an aggressive and track-inspired exhaust note.

POWER:

We developed every inch of it to bring out the aggressive performance that the Carrera is capable of. On our dyno we saw gains of 29whp and 25ft/lbs of tq.

FEATURES:

• Loud and aggressive cup car sound
• 1.75" / 45mm Header tubes, 26" long
• This system can be ordered with single or double outlets
• Maintain your factory in-cabin heat with the optional heat exchange on the headers
• Saves 43lbs from the rear of the vehicle with heat exchange option, and saves 47lbs without heat exchange option
• Constructed from mandrel bent T304L stainless steel
• Simple DIY bolt-on installation, no cutting or welding required
• All Fabspeed performance products are backed by the Fabspeed Lifetime Warranty

NOTE:

This package can be purchased with a heat exchange on the headers that will help maintain the factory in-cabin heat. Without the exchange system, you'll save an additional 4 lbs, for a total of 47 pounds of weight reduction.

PURCHASE DISCLAIMER: Fabspeed Motorsport does not condone the use of emission defeat devices for any vehicles used on public streets or roadways. Fabspeed Motorsport will not tamper, remove, disable, or bypass emissions equipment on a motor vehicle in accordance with 40 CFR Section 86.1854.12(a)(3), Clean Air Act 40 CFR 1068.101(b). This includes software, known as tunes, that reprogram a motor vehicles electronic control module to alter engine performance and enable the removal of filters, catalysts, and other critical emissions controls.

Please note: This is a special-order item manufactured to order. In some cases, please allow 4 – 5 weeks for the delivery. Special order items cannot be cancelled from this supplier once your order has been placed.

NOTE: In the United Kingdom, sports catalytic converters and bypass pipes do not have type approval and are not legally permitted for use on vehicles manufactured after 1st March 2001. They are not MOT compliant and cannot be used on public roads. These components are intended solely for race and track use.

For vehicles manufactured before 1st March 2001, a non-type approved sports catalytic converter may be fitted, provided it offers comparable performance to the original and the vehicle continues to meet the applicable emissions standards for its age.

The vehicle must still pass an MOT test. If you are located outside the UK, please check your local laws and regulations to ensure compliance.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

FSPOR993RSRWH

The product you are viewing cross references to these numbers

Fabspeed RENNKRAFT™ Modular GTLM exhaust package.



This is a complete headers to tips exhaust solution for the 992 GT3. Designed to be the most powerful emissions compliant exhaust system possible. We used all 25+ years of Porsche exhaust design experience and our finest manufacturing techniques to engineer this incredible modular system. We started with the headers. From our experience designing our 991/991.2 Long Tube Headers, we knew that "long tube" headers were essential for making BIG power on the GT3 platform. After dozens of dyno runs and many revisions to runner length, diameter, and collector design we moved on to the catalytic converters and rear section. With perfectly optimized headers and cats, there was no room to fit the factory muffler section, so that went out the window. In its place we implemented extra large 200 cell HJS cats and our signature cast X-pipe. These cats flow so much better than stock, that we only gained 1-2 peak WHP when we tested the system with no cats. You can see the dyno graph for yourself above. Finally, after much testing we found that our cast X-pipe provided some significant gains from 3-6K RPM when compared to a simple crossover tube. With the RENNKRAFT™ system, you can easily swap between catted and cat bypass using the quick release v-band clamps (patent pending). So if you're going to the track you can swap in cat-bypass pipes.

SOUND:

This system isn't for the faint of heart, it'll turn your GT3 into a snarling race-bred monster. This system is LOUD, it pops and gurgles, and it will absolutely scream at redline. This is at the cost of some interior drone and day-to-day livability.

POWER:

This is the way; the most powerful emissions compliant 992 GT3 exhaust system on the market. Max gains of 31 WHP and 39 ft/lbs of TQ are seen at 4250 RPM. That's 35 HP at the crank! Gains of over 20 WHP are carried all the way from 6000 RPM up to redline. You're going to feel the power that this system adds to your GT3!

FEATURES:

• Fits all Porsche 992 GT3 / GT3 RS Vehicles (2022+) (This system does delete the GPF, and will cause a check engine light for a monitored GPF system unless a simulator or tune is used)
• Adds 31 WHP and 39 ft/lbs of TQ at 4250 RPM (35 HP at the crank)
vSaves a massive 18lbs / 8.2 KGs versus the stock factory Porsche OEM system
• Equal length headers with Burns Stainless Formula 1/ Indy car style high velocity merge collectors
• Springs used for collector retention to accommodate for expansion and increase durability
• Constructed from T321 stainless steel Mil Spec tubing- ASME specifications
• CNC mandrel bent tubing featuring 2.75in / 70mm tubing
• Investment cast stainless steel flanges for maximum flow and strength
• Modular design that uses a V-band clamp so one can quickly swap between cats and cat bypass
• Switching to cat-bypass for track events prevents catalytic converter degradation during all out competition racing abuse
• We use German-made HJS HD tri-metallic 200-cell EURO 6 homologated catalytic converters for the best performance and reliability
• Optimized for maximum performance with NO catalyst generated check engine light, guaranteed, when Sport Cats are installed
• Comes with your choice of exhaust tips: Matte carbon fiber, mirror polished stainless steel, brushed stainless steel, Satin Black and 90 degree race turn down tips for sound control
• Simple bolt-on installation, no cutting or welding required
• Race / Track oriented products not covered under the Sound Solutions Warranty
• All Fabspeed performance products are backed by the Fabspeed Lifetime Warranty

Why We Choose HJS Catalytic Converters:

HJS German imported catalytic converters are made from some of the highest grade materials you can find in a catalytic converter. This yields high performance gains and longevity so it wont deteriorate over time like lower grade catalytic converters. These catalytic converters flow up to 93-95% of a straight pipe in most applications. The benefit is that you get the "straight pipe sound" while still being able to provide enough emissions scrubbing to prevent a check engine light. If you'd like to learn more, watch our video about HJS catalytic converters.

Sport Catalytic Converter (STREET) - This product removes the OEM catalytic converters from the vehicle, and as such, is strictly intended for closed track events and off-road use only. This product contains a High-Flow Sport Catalytic Converter solely intended for track and race cars as it is NOT California Air Resources Board Certified and not EPA certified. You are hereby informed and warned to check your local, state, and federals laws before buying and installing these or any aftermarket parts to be sure whether usage is in violation. All installation-risk and use-risk is borne by the end-user and installer of these parts.

Cat Bypass (RACE) - This product removes the OEM catalytic converters from the vehicle, and as such, is strictly intended for closed track events and off-road use only. This product is or contains a Racing Cat Bypass Pipe, which will give you check engine lights on OBD2 cars. Racing Cat Bypass Pipes are solely intended for track and race cars as they are NOT California Air Resources Board Certified and not EPA certified. You are hereby informed and warned to check your local, state, and federals laws before buying and installing these or any aftermarket parts to be sure whether usage is in violation. All installation-risk and use-risk is borne by the end-user and installer of these parts.

Please note: This is a special-order item manufactured to order. In some cases, please allow 4 – 5 weeks for the delivery. Special order items cannot be cancelled from this supplier once your order has been placed.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

FSPOR992GT3GTLMSC

The product you are viewing cross references to these numbers

Fabspeed RENNKRAFT™ Modular street and racing headers with HJS catalytic converters.



These modular headers are the perfect solution for any street driven 992 GT3. Our RENNKRAFT™ modular design features a quick release V-band connector that allows the owner to easily swap between our German made HJS 200 cell cats and QUICKTRACK™ cat bypass "straight pipes" for track use (patent pending). Rennkraft, translated from German is "race power". These unique headers offer true street and racetrack functionality in an innovative precision engineered package.

SOUND:

Many say sound is a subjective thing, but we like to think we've made the 992 GT3 sound objectively better with these high flowing headers. Equipped with our 200 cell cats, you will get a louder exhaust note with a much more raw sound. Higher frequency tones are more defined, and deceleration burbles are more robust and transparent. With the cat bypass pipes installed, the GT3 turns into a motorsport bred monster. At [art throttle the volume isn't overbearing, but the sound is very aggressive and race bred. With the stock muffler in place, there is no drone what-so-ever, even with the cat bypass option installed.

POWER:

After extensive dyno development we found the optimal header length and diameter. With no tune, compared to a stock car we gained 16 whp and 20 ft/lbs of TQ with the Sport Cats and 19 whp and 26 ft/lbs of TQ with Cat Bypass installed. That's a gain of 19 HP and 23 HP, respectively, at the crank! Peak horsepower also increased from our baseline of 452 whp to 461 whp with our HJS Sport Cats and 468 whp with Cat Bypass Pipes. See our dyno graph above for more details.

FEATURES:

• Fits all Porsche 992 GT3 / GT3 RS 2022+ Models worldwide (This system does delete the GPF, and will cause a check engine light for a monitored GPF system unless a simulator or tune is used)
• Impressive dyno proven power gains of 16 whp and 20 ft/lbs of TQ with the Sport Cats and 19 whp and 26 ft/lbs of TQ with Cat Bypass installed
• Save 6 lbs / 2.7 KGs with Cat Bypass compared to the factory headers
• Modular design that uses a V-band clamp so one can quickly swap between cats and cat bypass
• Constructed from CNC mandrel-bent T304L stainless steel
• Switching to cat-bypass for track events prevents catalytic converter degradation during all out competition racing abuse
• With the RENNKRAFT™ system, you can quickly install our QUICKTRACK™ cat bypass pipes for Racing and all out Race track-only competition events
• F1 style high velocity merge collectors
• Designed from 3D scans of the OEM headers so we can achieve perfect bolt-on fitment
• We use German-made HJS HD tri-metallic 200-cell EURO 6 homologated catalytic converters for the best performance and reliability
• We use the largest catalytic converters that will fit in the factory location for maximum flow
• Optimized for maximum performance with NO catalyst generated check engine light, guaranteed, when Sport Cats are installed
• Built 100% in house at Fabspeed Motorsport USA in Fort Washington, PA
• 25+ years of air-cooled and water-cooled Porsche experience went into our design for these hand-crafted headers
• Simple bolt-on installation, no cutting or welding required
• All Fabspeed performance products are backed by the Fabspeed Lifetime Warranty

Why We Choose HJS Catalytic Converters:

HJS German imported catalytic converters are made from some of the highest grade materials you can find in a catalytic converter. This yields high performance gains and longevity so it wont deteriorate over time like lower grade catalytic converters. These catalytic converters flow up to 93-95% of a straight pipe in most applications. The benefit is that you get the "straight pipe sound" while still being able to provide enough emissions scrubbing to prevent a check engine light. If you'd like to learn more, watch our video about HJS catalytic converters.

Sport Catalytic Converter (STREET) - This product removes the OEM catalytic converters from the vehicle, and as such, is strictly intended for closed track events and off-road use only. This product contains a High-Flow Sport Catalytic Converter solely intended for track and race cars as it is NOT California Air Resources Board Certified and not EPA certified. You are hereby informed and warned to check your local, state, and federals laws before buying and installing these or any aftermarket parts to be sure whether usage is in violation. All installation-risk and use-risk is borne by the end-user and installer of these parts.

Cat Bypass (RACE) - This product removes the OEM catalytic converters from the vehicle, and as such, is strictly intended for closed track events and off-road use only. This product is or contains a Racing Cat Bypass Pipe, which will give you check engine lights on OBD2 cars. Racing Cat Bypass Pipes are solely intended for track and race cars as they are NOT California Air Resources Board Certified and not EPA certified. You are hereby informed and warned to check your local, state, and federals laws before buying and installing these or any aftermarket parts to be sure whether usage is in violation. All installation-risk and use-risk is borne by the end-user and installer of these parts.

PURCHASE DISCLAIMER: Fabspeed Motorsport does not condone the use of emission defeat devices for any vehicles used on public streets or roadways. Fabspeed Motorsport will not tamper, remove, disable, or bypass emissions equipment on a motor vehicle in accordance with 40 CFR Section 86.1854.12(a)(3), Clean Air Act 40 CFR 1068.101(b). This includes software, known as tunes, that reprogram a motor vehicles electronic control module to alter engine performance and enable the removal of filters, catalysts, and other critical emissions controls.

Please note: This is a special-order item manufactured to order. In some cases, please allow 4 – 5 weeks for the delivery. Special order items cannot be cancelled from this supplier once your order has been placed.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

FSPOR992GT3MH

The product you are viewing cross references to these numbers

Fabspeed Supercup cat-back exhaust system.



This cat-back exhaust system for the 992 GT3 gives the 4.0L a more pronounced tone, and reduces weight from the rear of the car.

SOUND:

We thought the 992 GT3 was a bit quiet from the factory, even with PSE turned on. This system gives the high revving 4.0L the exhaust note it should have had from the factory, without introducing any interior drone.

FEATURES:

• Fits all Porsche 992 GT3 / GT3 RS 2022+ Models worldwide
• Saves 17bs / 7.7kg compared to the stock/OEM muffler
• Your choice of matte carbon fiber tips, polished stainless steel or brushed stainless steel tips
• Balance tube equalizes exhaust pulses which reduces drone and helps exhaust scavenging
• Constructed from mandrel bent T304L stainless steel
• Comes with Fabspeed electronic valve simulators that prevent a CEL
• Simple DIY (Do-It-Yourself) bolt-on installation, no cutting or welding required
• This cat-back system is emissions legal in all 50 states and the rest of the world (ROW)
• No Check Engine Light guaranteed
• Designed, developed, street and race track tested by Fabspeed Motorsport 25+ years of aircooled and water-cooled experience
• All Fabspeed performance products are backed by the Fabspeed Lifetime Warranty

Please note: This is a special-order item manufactured to order. In some cases, please allow 4 – 5 weeks for the delivery. Special order items cannot be cancelled from this supplier once your order has been placed.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

FSPOR992GT3SSX

The product you are viewing cross references to these numbers

Fabspeed Valvetronic Nordschleife cat-back exhaust system.



The Fabspeed Valvetronic Nordschleife Cat-Back Exhaust System gives the 992 GT3 a truly exotic sports car sound, all while retaining the functionality of PSE (Porsche Sport Exhaust). Our design process started with 3D scanning the entire OEM exhaust system using our CREAFORM 700 Handscan so that we could make a complete Solidworks 3D model of the exhaust. We then designed the exhaust and fixtures using that model so that the exhaust fit perfectly to OEM standards. After multiple revisions for sound and dyno testing we decided to use our signature cast X-Pipe to tie the two cylinder banks together for exhaust scavenging and to defeat resonance. The exhaust valves are made by Helical Limited in the United Kingdom. These ISO 9001 certified valves are the same ones Ferrari, McLaren and Porsche use on their GT cars. The piping is mandrel bent from T304 Stainless steel, and you have five different tip options to choose from.

SOUND:

With PSE off our Valvetronic exhaust gives a nice subtle increase in volume. With PSE on it turns the 4.0L's exhaust note into a truly exotic sound with a significant increase in volume. The exhaust note changes from the smooth purr of the OEM exhaust to the aggressive race-bred snarl of a 911 CUP car. (If you need to cut down on how loud your exhaust is because of race track rules, we sell turn down tips which cut 3-6db of exhaust SPL.)

POWER:

This system improves on Porsche's design by increasing pipe diameter from 2.5 in to 2.75 in and using our signature cast X-pipe instead of the factory H-Pipe. On our DynoJet we saw +14 whp at 4200 RPM and a healthy dose of torque down low at 4200 RPM gaining 17 ft/lbs of tq. That's 16 HP gain at the crank.

FEATURES:

• Fits all Porsche 992 GT3 / GT3 RS 2022+ Models worldwide w/o monitored GPF (Solution for GPF monitored cars will be released shortly)
• Significant Dyno gains across the RPM band. +17 ft/lbs tq @ 4200RPM and +14 whp @ 4200RPM
• Weight savings of 5lbs / 2.3KGs vs the factory exhaust
• Completely retains PSE valved exhaust functionality
• Uses aerospace quality Helical Limited exhaust valves imported from the U.K.
• Incorporates our signature cast X-pipe for superior flow and exhaust scavenging
• This cat-back system is emissions legal in all 50 states and the rest of the world (ROW)
• Constructed from high-quality 14-16ga CNC mandrel-bent T304L stainless steel for optimum flow and maximum durability
• Laser scanned and CAD designed for perfect OEM fitment using an Ametek Handyscan 700
• No Check Engine Light guaranteed
• Simple DIY bolt-on installation, no cutting or welding required
• All Fabspeed performance products are backed by the Fabspeed Lifetime Warranty

Please note: This is a special-order item manufactured to order. In some cases, please allow 4 – 5 weeks for the delivery. Special order items cannot be cancelled from this supplier once your order has been placed.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

FSPOR992GT3VLV

The product you are viewing cross references to these numbers