Brey-Krause

Brey Krause Side Mount Brackets for OEM Manual Sliders.



For Mounting to Porsche OEM 991, 981, 997, 987 Manual Sliders

Material: 11 gauge, type 304, stainless steel
Finish: Powder-coated in satin black
Weight: 1 lbs.

Models: Model R-9052 secures aftermarket seats with a width between 390mm - 430mm for driver's side and/or passenger's side.

Installation: Installs a range of fixed back aftermarket seats to OEM manual sliders seat widths. Seat compatibility is dependent on how side mounts are installed. The Side Mount System installs aftermarket seats in the lowest possible position with OEM sliders. This Side Mount System installs seats about 0.5 inches lower than the stock seat, depending on the type of aftermarket seat used.

Not compatible with OEM sliders with powered fore and aft movement.

Miscellaneous: The R-9052 Side Mounts sold as a set to complete installation of one seat assembly with use of 3-point seat belt, Driver or Passenger side. Clip-In Lap Belt Mounts, Sub Strap Mount, and Fire Extinguisher Mount, for fire extinguisher and up to 6-point harness installation not included.

The Brey-Krause Side Mount System for Porsche OEM manual 991, 981, 997, and 987 sliders, provides a simple, light, and inexpensive seat mounting solution for your Porsche. This Side Mount System not only installs a wide range of seats, but offers integrated mounting points for Sub Strap, Lap Belts, and Fire Extinguisher Mounts. Due to factory testing requirements for seat belt anchorages, harnesses and seat belts can be mounted above the slider. This means no matter the seating position seat belts, harnesses, and fire extinguisher travel with the seat and remain in proper position in relation to the driver and seat. This provides a significant advantage compared to seat assemblies utilizing aftermarket sliders that are not design to have harnesses mounted above the sliders.

For Installation instructions please CLICK HERE

Related Parts:
R-9259 - Sub Strap Mount
R-9006 - Inside Clip-In Lap Belt Mount
R-9003 - Outside Clip-In Lap Belt Mount

Brey Krause Side Mount Brackets for GT3 Race Seat (for floor mounting) - 911 (1999 - present), Boxster, Cayman - Passenger Side



For 997, 996, Cayman, 987, 986

The R-9081 requires the R-9042 Side Mount to Floor Adapter

Material: 11 gauge, type 304, stainless steel.
Finish: Powder-coated in durable black wrinkle-finish.
Weight: 4 lbs.
Models: Model R-9081 secures Porsche model GT3 seats to floor on passenger's side. Model R-9080 secures Porsche mode GT3 seats to floor on passenger's side.
Installation: Adapts GT3 seats to 996/Boxster for direct floor mount with R-9042.
Miscellaneous: Allows taller drivers to floor mount seats for meeting clearance requirements. May be mounted in three positions with two inches of total adjustment forward and back. R-9042 adapter is required for installation. R-908X series seat mount kits provide an inboard seat belt mount. R-9031 optional anti-sub strap mount for R-908X series.

For Installation instructions please CLICK HERE

Related Parts:
R-9042 Seat Floor Mount Adapter

Brey Krause Seat Track Adapter.



For 986/996/987/997 Aftermarket Sparco and Cobra Slider Mounting

Material: Tig welded, 7 gauge, type 304, stainless steel
Finish: Satin finish stainless
Weight: 2 lb. 6 oz.
Models: Model R-9041 adapts Sparco, OMP, and Cobra sliders to 996/997/991/986/987/981
Installation: Attach to chassis using existing hardware

For Installation instructions CLICK HERE

Brey Krause Seat Track Adapter.



For 986/996/987/997 Aftermarket Recaro Slider Mounting

Material: Tig welded, 7 gauge, type 304, stainless steel.
Finish: Satin finish stainless.
Weight: 2 lb. 6 oz.
Models: Model R-9040 adapts part# 0.20.40 Recaro seat sliders to 996/997 or Boxster.
Installation: Attach to chassis using existing hardware.

For Installation instructions CLICK HERE

Related Parts:
R-9062 Side Mount Brackets for Recaro Pole Position (fits Recaro Slider Part 0.20.40)
R-9063 Side Mount Brackets for Recaro Profi SPG, Recaro Profi SPA, Recaro Pro Racer HANS, Recaro Pro Racer HANS SPA - (fits Recaro Slider Part 0.70.9NT)
R-9066 Side Mount Brackets for Recaro SPGxl (for Recaro Slider Part 0.70.9NT) 911 (1964-Present)

Brey Krause Side Mount Brackets for GT3 Race Seat (fits manual stock sliders) - 911 (1999 - present), Boxster, Cayman



For Mounting to OEM Porsche Manual Sliders: 996, 986

New: Now features threaded lug on both side mounts. This product in now interchangeable between driver and passenger sides.

Material: 11 gauge, type 304, stainless steel
Finish: Powder-coated in durable black wrinkle-finish
Weight: 4 lbs.
Models: Model R-9079 secures GT3 seats to 996/Boxster sliders
Installation: Repositions GT3 seats 1" lower when mounted to factory sliders.
Miscellaneous: R-907X series seat mount kits provides inboard & outboard seat belt mounts.

Brey Krause Race Seat Side Mount Brackets For OMP HTE Seats- Right Side and Left side (for manual stock sliders) - 996/986

For Mounting to OEM Porsche Manual Sliders: 996, 986

Material: 11 gauge, type 304, stainless steel
Finish: Powder-coated in durable black wrinkle-finish
Weight: 4 lbs.
Models: Model R-9751 secures OMP-HTE Seats to Passenger's side. Use R- 9751 for driver's side and passenger side.
Installation: Adapts OMP-HTE Seats to 996/986 factory sliders or can be used with BK's R-9044 assembly.
Miscellaneous: Seat mount kits provide an inboard seat belt mount.

Brey Krause Brackets for Bottom Mount OMP Seats - for Boxster or 996/TT Non-Power Sliders



For Mounting to OEM Porsche Manual Sliders

Material: 11 gauge, type 304, stainless steel
Finish: Powder-coated in durable black wrinkle-finish
Weight: 3 lbs.
Models: Model R-9091 secures OMP brand bottom mount seats to Boxster/996/TT sliders.
Installation: Mounts bottom mount seat to Porsche non-power factory seats.

For Installation instructions please CLICK HERE

Brey Krause Side Mount Brackets for Sparco Evo-2 Plus (Evo-2 GRP), Passenger Side - 996/986 OEM Manual Sliders



For Mounting to 996/986 OEM Manual Sliders

Material: 11 gauge, type 304 stainless steel
Finish: Powder-coated in durable black wrinkle-finish
Weight: 4.4 lbs.
Models: Model R-9762 secures Sparco Evo 2 Plus (Evo-2 GRP) seat to Passenger side. Use R-9761 for Driver side. OEM 996-986 Porsche Manual Sliders
Installation: Adapts Sparco Evo 2 Plus (Evo-2 GRP) seat to 996/986 OEM manual sliders or R-9044 floor mounting assembly.
Miscellaneous: R-9762 fits 996 / 997 / 986 / 987 installations using methods mentioned above with this seat.

Brey Krause Side Mount Brackets for Sparco Evo-2 Plus (Evo-2 GRP), Driver Side - 996/986 OEM Manual Sliders



For Mounting to OEM 996/986 Boxster Manual Sliders or R-9044 Floor Mount

Material: 11 gauge, type 304 stainless steel
Finish: Powder-coated in durable black wrinkle-finish
Weight: 4.4 lbs.
Models: Model R-9761 secures Sparco Evo 2 Plus (Evo-2 GRP) seat to Driver side. Use R-9067 for Passenger side. OEM 996-986 Porsche Manual Sliders
Installation: Adapts Sparco Evo 2 Plus (Evo-2 GRP) seat to 996/986 OEM manual sliders or R-9044 floor mounting assembly.
Miscellaneous: R-9761 fits 996 / 997 / 986 / 987 installations using methods mentioned above with this seat.

Related Parts:
R-9044 - Seat Floor Mount Adapter

Brey Krause Side Mount Brackets for Sparco Evo 2 - 911 (for manual 996 or 2001 TT sliders) - 911, Boxster, Cayman (99 - present when combined with 996/TT slider)



For Mounting to OEM Porsche Manual Sliders: 996, 986 Boxster

The R-9073 fits passenger's side 996/Boxster manual sliders.


Material: 11 gauge, type 304, stainless steel.
Finish: Powder-coated in durable black wrinkle-finish.
Weight: 4 lbs.
Models: Model R-9073 secures Sparco Evo 2 to driver's side. Use R-9074 for passenger's side.
Installation: Adapts Sparco Evo 2, Cobra Imola II GT, and Cobra Sebring S GT to 996//Boxster/TT factory sliders.
Miscellaneous: R-907X series seat mount kits provide an inboard seat belt mount.

Related Parts:
R-9073 Side Mount Brackets for Sparco Evo 2 - Driver Side

Brey Krause Side Mount Brackets for Sparco Evo 2 - 911 (for manual 996 or 2001 TT sliders) - 911, Boxster, Cayman (99 - present when combined with 996/TT slider)



For Mounting to OEM Porsche Manual Sliders: 996, 986 Boxster

The R-9073 fits driver's side 996/Boxster manual sliders.

Material: 11 gauge, type 304, stainless steel
Finish: Powder-coated in durable black wrinkle-finish
Weight: 4 lbs.
Models: Model R-9073 secures Sparco Evo 2 to driver's side. Use R-9074 for passenger's side.
Installation: Adapts Sparco Evo 2, Cobra Imola II GT, and Cobra Sebring S GT to 996/Boxster/TT factory sliders.
Miscellaneous: R-907X series seat mount kits provide an inboard seat belt mount.

Related Parts:
R-9074 Side Mount Brackets for Sparco Evo 2

Brey Krause Side Mount Brackets for Sparco Evo, Sparco Pro 2000 (for manual 996 or 2001 TT sliders) - 911, Boxster, Cayman (99 - present when combined with 996/TT slider).



For Mounting to OEM Porsche Manual Sliders: 996, 986

The R-9071 fits driver's side or passenger side 996/Boxster manual sliders.

Material: 11 gauge, type 304, stainless steel.
Finish: Powder-coated in durable black wrinkle-finish.
Weight: 4 lbs.
Models: Model R-9071 secures Sparco Evo/Pro 2000, OMP, and MOMO Super Cup Seats to driver's side. Use R- 9072 for passenger's side.
Installation: Adapts Sparco Evo/Pro 2000, OMP, MOMO Super Cup Seats to 996/Boxster/TT factory sliders.
Miscellaneous: R-907X series seat mount kits provide an inboard seat belt mount.

For Installation instructions please CLICK HERE

Brey Krause Side Mount Brackets - Passenger's Side for Recaro SPG/SPA (includes Hans Pro Racer models) - 986/996 manual sliders.



For Mounting to OEM Porsche Manual Sliders: 996, 986

Material: 11 gauge, type 304, stainless steel.
Finish: Powder-coated in durable black wrinkle-finish
Weight: 4.5 lbs.
Models: Model R-9756 secures Recaro SPG/SPA seats to passenger's side. Use R- 9755 for driver's side.
Installation: Adapts Recaro SPG/SPA seats (including Pro Racer Hans models) to 996/986 OEM manual sliders or BK's R-9044 fixed floor mount assembly.
Miscellaneous: R-9756 provides an inboard seat belt mount.

Brey Krause Side Mount Brackets - Driver's side and Passenger side for Recaro SPG/SPA (includes Hans Pro Racer models)- 986/996 manual sliders.



This is sold per a Seat

For Mounting to OEM Porsche Manual Sliders: 996, 986

Material: 11 gauge, type 304 stainless steel.
Finish: Powder-coated in durable black wrinkle-finish
Weight: 4.5 lbs.
Models: Model R-9755 secures Recaro SPG/SPA Driver's side and Passenger side.
Installation: Adapts Recaro SPG/SPA seats (including Pro Racer Hans models) to 996/986 OEM manual sliders or BK's R-9044 fixed floor mount assembly.
Miscellaneous: R-9755 provides an inboard seat belt mount.

Brey Krause Side Mount Brackets - Drivers Side and Passenger Side - for Recaro Pole Position, Sparco Evo II US, Recaro Profi SPGxl (for manual 996 or 2001 TT sliders) - 911, Boxster, Cayman (99 - present when combined with 996/TT slider)

For Mounting to OEM Porsche Manual Sliders: 996, 986

Material: 11 gauge, type 304, stainless steel.
Finish: Powder-coated in durable black wrinkle-finish.
Weight: 4 lbs.
Models: Model R-9075 secures Recaro Pole Position, Recaro SPGxl, or Sparco Evo II US
Installation: Adapts Recaro Pole Position to 996/Boxster/TT factory sliders.
Miscellaneous: R-907X series seat mount kits provide an inboard seat belt mount.

Related Parts:
R-9044 Seat Floor Mount Adapter with Integrated Sub Strap Mount

Brey Krause 996/986/987/997 Sliders and Seats Adapter Kit.



Fits:
Porsche 911 (964/993) 1984-1998
Porsche 944 / 924 / 968

The R-9043 mounts 996/986/987/997 sliders with seats in a 911(993/964) & 944/924/968.

Material: Tig-welded, 7 gauge, type 304, stainless steel
Finish: Satin finish stainless
Weight: 1 lb. 6 oz.
Models: Model R-9043
Installation: Mounts 996 sliders and seats to floor pans. This kit is for installation of one seat.

For Installation instructions CLICK HERE