Switchable Silencers / Mufflers
Refine by Car Type
- Porsche 991 Carrera 2 3.0L (370 Bhp)
- Porsche 991 Carrera 2S 3.0L (420 Bhp)
- Porsche 991 Carrera 4 3.0L (370 Bhp)
- Porsche 991 Carrera 4S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 2 3.0L (370 Bhp)
- Porsche 991 Cabriolet 2S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 4 3.0L (370 Bhp)
- Porsche 991 Cabriolet 4S 3.0L (420 Bhp)
- Porsche 991 Targa 4 3.0L (370 Bhp)
- Porsche 991 Targa 4S 3.0L (420 Bhp)
- Porsche 991 Turbo Coupe 3.8L (540 Bhp)
- Porsche 991 Turbo S Coupe 3.8L (580 Bhp)
- Porsche 991 Turbo Cabriolet 3.8L (540 Bhp)
- Porsche 991 Turbo S Cabriolet 3.8L (580 Bhp)
- Porsche 991 Speedster 4.0L (510Bhp)
- Porsche 991 GT3 4.0L (500 Bhp) / GT3 RS 4.0L (520 Bhp)
- Porsche 991 GT2 RS 3.8L PDK (700 bhp)
Filter by brand
S-PO/TI/5H
Product Information
For Porsche sport exhaust system only
Fits:
Porsche 911 (991.2) Carrera / S / 4 / 4S/ GTS 2017>>
Built from high-grade, heat-resistant, ultra-lightweight titanium alloys – which are sandblasted and coated for durability – the Slip-On Line is the first step in exhaust modification. Delivering weight savings in excess of 35% over stock, while increasing performance, the exhaust uses the latest innovative technologies in its construction, including parts cast in Akrapovič's in-house foundry. It is perfectly tuned to give a unique sound to the turbocharged boxer engine and is finished with two beautiful tailpipes to add to the aesthetic pleasure. Designed to replace the Porsche sport system, the Slip-On Line can also be used with the optional stainless-steel link pipe set to further improve sound and performance.
Fitment notice: The system is designed to replace the Porsche sport exhaust system.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
S-PO
The product you are viewing cross references to these numbers
Product Information
Akrapovic Slip-On Line Titanium Exhaust SystemFor Porsche sport exhaust system only
Fits:
Porsche 911 (991.2) Carrera / S / 4 / 4S/ GTS 2017>>
Built from high-grade, heat-resistant, ultra-lightweight titanium alloys – which are sandblasted and coated for durability – the Slip-On Line is the first step in exhaust modification. Delivering weight savings in excess of 35% over stock, while increasing performance, the exhaust uses the latest innovative technologies in its construction, including parts cast in Akrapovič's in-house foundry. It is perfectly tuned to give a unique sound to the turbocharged boxer engine and is finished with two beautiful tailpipes to add to the aesthetic pleasure. Designed to replace the Porsche sport system, the Slip-On Line can also be used with the optional stainless-steel link pipe set to further improve sound and performance.
Fitment notice: The system is designed to replace the Porsche sport exhaust system.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
S-PO
9P1251053A
9P1251053C
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 991 Carrera 2 3.0L (370 Bhp)
- Porsche 991 Carrera 2S 3.0L (420 Bhp)
- Porsche 991 Carrera 4 3.0L (370 Bhp)
- Porsche 991 Carrera 4S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 2 3.0L (370 Bhp)
- Porsche 991 Cabriolet 2S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 4 3.0L (370 Bhp)
- Porsche 991 Cabriolet 4S 3.0L (420 Bhp)
- Porsche 991 Targa 4 3.0L (370 Bhp)
- Porsche 991 Targa 4S 3.0L (420 Bhp)
£4,516.00 inc. VAT
Now £3,883.76 inc. VAT
Orderable - 3 to 6 Days
Shop Securely
12 Month Warranty
Worldwide Delivery
Request a
Trade Price Match
P-HF1065
Product Information
Fits:
Porsche 911 (991.2) Carrera /S/4/4S/GTS 2016 - 2019
Porsche 911 (991.2) Carrera Cabriolet /S/4/4S/GTS 2016 - 2019
The optional Akrapovič Sound Kit enables owners of selected Akrapovič car exhausts to control the sound of the system from the cockpit of their machine. Using Akrapovič technology, drivers can easily switch between the quiet mode and a sportier sound. With the use of a receiver to drive the actuators that open or close the valves at the end of the exhaust system, drivers can use the Sound Remote Controller or the new smartphone app (for iOS and Android) to regulate the valves.
Fitment notice: Akrapovič Sound Kit is mandatory part needed for mounting the Akrapovič exhaust system (slip-on, link pipe set and diffuser) to Porsche Carrera 991.2 models, equipped with non sport standard systems without valves. In case the vehicle is equipped with non sport system with valves, then the Sound Kit is not needed. Please read the instructions carefully before the start of the installation.
Pictures are symbolic.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
P-HF1065
The product you are viewing cross references to these numbers
Product Information
Akrapovič Sound KitFits:
Porsche 911 (991.2) Carrera /S/4/4S/GTS 2016 - 2019
Porsche 911 (991.2) Carrera Cabriolet /S/4/4S/GTS 2016 - 2019
The optional Akrapovič Sound Kit enables owners of selected Akrapovič car exhausts to control the sound of the system from the cockpit of their machine. Using Akrapovič technology, drivers can easily switch between the quiet mode and a sportier sound. With the use of a receiver to drive the actuators that open or close the valves at the end of the exhaust system, drivers can use the Sound Remote Controller or the new smartphone app (for iOS and Android) to regulate the valves.
Fitment notice: Akrapovič Sound Kit is mandatory part needed for mounting the Akrapovič exhaust system (slip-on, link pipe set and diffuser) to Porsche Carrera 991.2 models, equipped with non sport standard systems without valves. In case the vehicle is equipped with non sport system with valves, then the Sound Kit is not needed. Please read the instructions carefully before the start of the installation.
Pictures are symbolic.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
P-HF1065
P-HF1065
PHF1065
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 991 Carrera 2 3.0L (370 Bhp)
- Porsche 991 Carrera 2S 3.0L (420 Bhp)
- Porsche 991 Carrera 4 3.0L (370 Bhp)
- Porsche 991 Carrera 4S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 2 3.0L (370 Bhp)
- Porsche 991 Cabriolet 2S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 4 3.0L (370 Bhp)
- Porsche 991 Cabriolet 4S 3.0L (420 Bhp)
- Porsche 991 Targa 4 3.0L (370 Bhp)
- Porsche 991 Targa 4S 3.0L (420 Bhp)
£768.92 inc. VAT
Now £661.27 inc. VAT
Orderable - 3 to 6 Days
Shop Securely
12 Month Warranty
Worldwide Delivery
Request a
Trade Price Match
3606009140
Product Information
The silencers in this exhaust are linked to one another, creating a greater balance between the two silencers which improves flow, performance and provides a sports sound. It is a performance exhaust with a louder note and boasts significant power gains over OE system. This is race / offroad use only.
NOTE: Sports catalytic converters and bypass pipes do not have type approval and are not legally permitted for use on vehicles manufactured after 1st March 2001 in the United Kingdom. They are not MOT compliant and must not be used on public roads. These components are intended for race and track use only. If you are located outside the UK, please consult your local laws and regulations to ensure compliance.
Product Information
Exhaust Muffler / Sport Switchable Race Exhaust System in Titanium DesignTek. With Cat bypass pipes.Fits:
Porsche 991.2 3.0L cars without switchable exhaust system (PSE)
High quality titanium exhaust system for the Porsche 991.2. Manifold back exhaust that includes Catalytic converter bypass and tailpipes.Porsche 991.2 3.0L cars without switchable exhaust system (PSE)
The silencers in this exhaust are linked to one another, creating a greater balance between the two silencers which improves flow, performance and provides a sports sound. It is a performance exhaust with a louder note and boasts significant power gains over OE system. This is race / offroad use only.
NOTE: Sports catalytic converters and bypass pipes do not have type approval and are not legally permitted for use on vehicles manufactured after 1st March 2001 in the United Kingdom. They are not MOT compliant and must not be used on public roads. These components are intended for race and track use only. If you are located outside the UK, please consult your local laws and regulations to ensure compliance.
Vehicle Group
Vehicle Group
- Porsche 991 Carrera 2 3.0L (370 Bhp)
- Porsche 991 Carrera 2S 3.0L (420 Bhp)
- Porsche 991 Carrera 4 3.0L (370 Bhp)
- Porsche 991 Carrera 4S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 2 3.0L (370 Bhp)
- Porsche 991 Cabriolet 2S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 4 3.0L (370 Bhp)
- Porsche 991 Cabriolet 4S 3.0L (420 Bhp)
- Porsche 991 Targa 4 3.0L (370 Bhp)
- Porsche 991 Targa 4S 3.0L (420 Bhp)
£1,995.00 inc. VAT
Now £1,695.75 inc. VAT
In Stock - 24 Hour Dispatch
Shop Securely
12 Month Warranty
Worldwide Delivery
Request a
Trade Price Match
3606009106
Product Information
Fits:
Porsche 991.2 Carrera (except Turbo / GT3 / R)
For cars with Sport exhaust fitted or cars with sport exhaust bumper conversion (centre exit pipes)
Not suitable for cars built after April 2018 which have PPF fitted.
Please note: This system does not come with valve control system as you can use existing wiring from your sport exhaust. If you wish to have a wireless remote control kit you need to order one here in the basket stage.
Please note: These catalytic bypasses will make your car sound a lot louder than with stock cats. This exhaust is intended for offroad use and will be very loud . We recommend to use sport exhaust if you are concerned about decibel levels.
Please note: It is illegal to fit this product for road use on type-approved vehicles first used on or after 1/3/2001
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
3606009106
The product you are viewing cross references to these numbers
Product Information
DesignTek Race Exhaust Switachable turbo-back cat bypass system with Black Diamond tail pipe. Titanium.Fits:
Porsche 991.2 Carrera (except Turbo / GT3 / R)
For cars with Sport exhaust fitted or cars with sport exhaust bumper conversion (centre exit pipes)
Not suitable for cars built after April 2018 which have PPF fitted.
Please note: This system does not come with valve control system as you can use existing wiring from your sport exhaust. If you wish to have a wireless remote control kit you need to order one here in the basket stage.
Please note: These catalytic bypasses will make your car sound a lot louder than with stock cats. This exhaust is intended for offroad use and will be very loud . We recommend to use sport exhaust if you are concerned about decibel levels.
Please note: It is illegal to fit this product for road use on type-approved vehicles first used on or after 1/3/2001
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
3606009106
9P1251053A
9P1251053C
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 991 Carrera 2 3.0L (370 Bhp)
- Porsche 991 Carrera 2S 3.0L (420 Bhp)
- Porsche 991 Carrera 4 3.0L (370 Bhp)
- Porsche 991 Carrera 4S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 2 3.0L (370 Bhp)
- Porsche 991 Cabriolet 2S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 4 3.0L (370 Bhp)
- Porsche 991 Cabriolet 4S 3.0L (420 Bhp)
- Porsche 991 Targa 4 3.0L (370 Bhp)
- Porsche 991 Targa 4S 3.0L (420 Bhp)
£2,395.00 inc. VAT
Now £2,035.75 inc. VAT
In Stock - 24 Hour Dispatch
Shop Securely
12 Month Warranty
Worldwide Delivery
Request a
Trade Price Match
3606009105
Product Information
Fits:
Porsche 991.2 Carrera (except Turbo / GT3 / R)
For cars with Sport exhaust fitted or cars with sport exhaust bumper conversion (centre exit pipes)
Not suitable for cars built after April 2018 which have PPF fitted.
Please note: This system does not come with valve control system as you can use existing wiring from your sport exhaust. If you wish to have a wireless remote control kit you need to order one here in the basket stage.
Please note: These catalytic bypasses will make your car sound a lot louder than with stock cats. This exhaust is intended for offroad use and will be very loud . We recommend to use sport exhaust if you are concerned about decibel levels.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
3606009105
The product you are viewing cross references to these numbers
Product Information
DesignTek Race Exhaust Switachable turbo-back cat bypass system with Black Diamond tail pipe. Stainless steel.Fits:
Porsche 991.2 Carrera (except Turbo / GT3 / R)
For cars with Sport exhaust fitted or cars with sport exhaust bumper conversion (centre exit pipes)
Not suitable for cars built after April 2018 which have PPF fitted.
Please note: This system does not come with valve control system as you can use existing wiring from your sport exhaust. If you wish to have a wireless remote control kit you need to order one here in the basket stage.
Please note: These catalytic bypasses will make your car sound a lot louder than with stock cats. This exhaust is intended for offroad use and will be very loud . We recommend to use sport exhaust if you are concerned about decibel levels.
Please note: It is illegal to fit this product for road use on type-approved vehicles first used on or after 1/3/2001
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
3606009105
9P1251053A
9P1251053C
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 991 Carrera 2 3.0L (370 Bhp)
- Porsche 991 Carrera 2S 3.0L (420 Bhp)
- Porsche 991 Carrera 4 3.0L (370 Bhp)
- Porsche 991 Carrera 4S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 2 3.0L (370 Bhp)
- Porsche 991 Cabriolet 2S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 4 3.0L (370 Bhp)
- Porsche 991 Cabriolet 4S 3.0L (420 Bhp)
- Porsche 991 Targa 4 3.0L (370 Bhp)
- Porsche 991 Targa 4S 3.0L (420 Bhp)
£1,395.00 inc. VAT
Now £1,185.75 inc. VAT
In Stock - 3- 5 Days Dispatch
Shop Securely
12 Month Warranty
Worldwide Delivery
Request a
Trade Price Match
3606009103
Product Information
Fits:
Porsche 991.2 Carrera (except Turbo / GT3 / R)
For cars with Sport exhaust fitted or cars with sport exhaust bumper conversion (centre exit pipes)
Not suitable for cars built after April 2018 which have PPF fitted.
Please note: This system does not come with valve control system as you can use existing wiring from your sport exhaust. If you wish to have a wireless remote control kit you need to order one here 9996001111
For Wiring Diagram please CLICK HERE
NOTE: Sports catalytic converters and bypass pipes do not have type approval and are not legally permitted for use on vehicles manufactured after 1st March 2001 in the United Kingdom. They are not MOT compliant and must not be used on public roads. These components are intended for race and track use only. If you are located outside the UK, please consult your local laws and regulations to ensure compliance.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
3606009103
The product you are viewing cross references to these numbers
Product Information
DesignTek Sport Exhaust VALVETRONIC system with 300 cell cats and Euro 4 coating. Stainless steel.Fits:
Porsche 991.2 Carrera (except Turbo / GT3 / R)
For cars with Sport exhaust fitted or cars with sport exhaust bumper conversion (centre exit pipes)
Not suitable for cars built after April 2018 which have PPF fitted.
Please note: This system does not come with valve control system as you can use existing wiring from your sport exhaust. If you wish to have a wireless remote control kit you need to order one here 9996001111
For Wiring Diagram please CLICK HERE
NOTE: Sports catalytic converters and bypass pipes do not have type approval and are not legally permitted for use on vehicles manufactured after 1st March 2001 in the United Kingdom. They are not MOT compliant and must not be used on public roads. These components are intended for race and track use only. If you are located outside the UK, please consult your local laws and regulations to ensure compliance.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
3606009103
3606009103
9P1251053A
9P1251053C
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 991 Carrera 2 3.0L (370 Bhp)
- Porsche 991 Carrera 2S 3.0L (420 Bhp)
- Porsche 991 Carrera 4 3.0L (370 Bhp)
- Porsche 991 Carrera 4S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 2 3.0L (370 Bhp)
- Porsche 991 Cabriolet 2S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 4 3.0L (370 Bhp)
- Porsche 991 Cabriolet 4S 3.0L (420 Bhp)
- Porsche 991 Targa 4 3.0L (370 Bhp)
- Porsche 991 Targa 4S 3.0L (420 Bhp)
£1,695.00 inc. VAT
Now £1,440.75 inc. VAT
In Stock - 24 Hour Dispatch
Shop Securely
12 Month Warranty
Worldwide Delivery
Request a
Trade Price Match
TSPO991T16.003.A
Product Information
Only for cars with Porsche Sports Exhaust (PSE)
Fits
Porsche 991.2 Carrera with PSE
Porsche 991.2 Carrera S with PSE
Porsche 991.2 GTS with PSE
RACETRACK USE ONLY
These components are designed and developed for racetrack use and to maximise the car's performance. They are not street legal and must be installed by professionals in the sector
INSTALLATION
The component is perfectly interchangeable with the original components, following the instructions in the constructor's workshop manual. Replaces rear silencer/muffler
SOUND - TUBI SOUND
Tubi Sound is the standard sound of Tubi Style exhausts, louder and more powerful than the original sound. This sound represents our brand
END TIPS DESIGN - OE
The muffler must be used in conjunction with the original exhaust end tips
EXHAUST FINISH - POLISHED
Mirror finishes are highly reflective and created by polishing the stainless steel. The polishing process enhances appearance and consistency, making cleaning easier. A special rolling procedure is used. It is essential to remove deep scratches as any surface defects will be very noticeable on the finished product. it improves corrosion resistance. The polishing eradicates crevices where corrosive particles can lodge themselves
END TIPS NUMBER AND POSITION
2 + 2 CENTRAL
There are two pairs of tailpipes with a gap between them, in the centre of the rear bumper
MATERIAL
AISI 304 STAINLESS STEEL
A choice stainless steel ideal for aggressive environments where combustion emissions can cause serious chemical corrosion on other types of metal
ECU REMAPPING
ENGINE LIGHT
Replacement or removal of components such as catalytic converters, GPFs and electric actuators may cause the engine warning light to come on.
In this case, the installer must reprogram the software to eliminate the light
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
TSPO991T16.003.A
The product you are viewing cross references to these numbers
Product Information
Sports exhaust muffler Porsche 991.2 Carrera, Carrera S and GTS 2017-2019Only for cars with Porsche Sports Exhaust (PSE)
Fits
Porsche 991.2 Carrera with PSE
Porsche 991.2 Carrera S with PSE
Porsche 991.2 GTS with PSE
RACETRACK USE ONLY
These components are designed and developed for racetrack use and to maximise the car's performance. They are not street legal and must be installed by professionals in the sector
INSTALLATION
The component is perfectly interchangeable with the original components, following the instructions in the constructor's workshop manual. Replaces rear silencer/muffler
SOUND - TUBI SOUND
Tubi Sound is the standard sound of Tubi Style exhausts, louder and more powerful than the original sound. This sound represents our brand
END TIPS DESIGN - OE
The muffler must be used in conjunction with the original exhaust end tips
EXHAUST FINISH - POLISHED
Mirror finishes are highly reflective and created by polishing the stainless steel. The polishing process enhances appearance and consistency, making cleaning easier. A special rolling procedure is used. It is essential to remove deep scratches as any surface defects will be very noticeable on the finished product. it improves corrosion resistance. The polishing eradicates crevices where corrosive particles can lodge themselves
END TIPS NUMBER AND POSITION
2 + 2 CENTRAL
There are two pairs of tailpipes with a gap between them, in the centre of the rear bumper
MATERIAL
AISI 304 STAINLESS STEEL
A choice stainless steel ideal for aggressive environments where combustion emissions can cause serious chemical corrosion on other types of metal
ECU REMAPPING
ENGINE LIGHT
Replacement or removal of components such as catalytic converters, GPFs and electric actuators may cause the engine warning light to come on.
In this case, the installer must reprogram the software to eliminate the light
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
TSPO991T16.003.A
9P1251053B
9P1251053A
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 991 Carrera 2 3.0L (370 Bhp)
- Porsche 991 Carrera 2S 3.0L (420 Bhp)
- Porsche 991 Carrera 4 3.0L (370 Bhp)
- Porsche 991 Carrera 4S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 2 3.0L (370 Bhp)
- Porsche 991 Cabriolet 2S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 4 3.0L (370 Bhp)
- Porsche 991 Cabriolet 4S 3.0L (420 Bhp)
- Porsche 991 Targa 4 3.0L (370 Bhp)
- Porsche 991 Targa 4S 3.0L (420 Bhp)
£2,369.24 inc. VAT
Now £2,250.78 inc. VAT
Orderable - 16 to 21 Days
Shop Securely
12 Month Warranty
Worldwide Delivery
Request a
Trade Price Match
TSPO991GT3RS19.001.A
Product Information
Fits
Porsche 911 (991.3) GT3 2019
Porsche 911 (991.3) Speedster 2019
RACETRACK USE ONLY
These components are designed and developed for racetrack use and to maximise the car's performance. They are not street legal and must be installed by professionals in the sector
INSTALLATION
Must be installed with OE headers for GPF (Gasoline Particulate Filter)
The component is perfectly interchangeable with the original components, following the instructions in the constructor's workshop manual
SOUND - STRAIGHT PIPE
The straight pipe version guarantees a direct path from the engine, removing all factors which may affect the acoustic tuning
END TIPS DESIGN - OBLIQUE CUT
Oblique-cut tailpipe with internal rolled lip
END TIPS DIMENSION- 100mm
The value refers to the external dimensions of the exhaust end tip
EXHAUST AND END TIPS FINISH - POLISHED
Mirror finishes are highly reflective and created by polishing the stainless steel. The polishing process enhances appearance and consistency, making cleaning easier. A special rolling procedure is used. It is essential to remove deep scratches as any surface defects will be very noticeable on the finished product. it improves corrosion resistance. The polishing eradicates crevices where corrosive particles can lodge themselves
END TIPS NUMBER AND POSITION - 2 CENTRAL
The end tips emerge from the centre
MATERIAL
AISI 304 STAINLESS STEEL
A choice stainless steel ideal for aggressive environments where combustion emissions can cause serious chemical corrosion on other types of metal
MAIN PIPE DIMENSION - 76
This is the diameter in mm of the main pipe of the exhaust system
EXHAUST VALVE
ELECTRIC
The exhaust system is complete with electric valve. The electric actuator is not included and the standard actuator already installed on the car must be used. Control of the original valve is still provided
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
TSPO991GT3RS19.001.A
The product you are viewing cross references to these numbers
Product Information
Sports exhaust Porsche 911 (991.3) GT3 and Speedster 2019Fits
Porsche 911 (991.3) GT3 2019
Porsche 911 (991.3) Speedster 2019
RACETRACK USE ONLY
These components are designed and developed for racetrack use and to maximise the car's performance. They are not street legal and must be installed by professionals in the sector
INSTALLATION
Must be installed with OE headers for GPF (Gasoline Particulate Filter)
The component is perfectly interchangeable with the original components, following the instructions in the constructor's workshop manual
SOUND - STRAIGHT PIPE
The straight pipe version guarantees a direct path from the engine, removing all factors which may affect the acoustic tuning
END TIPS DESIGN - OBLIQUE CUT
Oblique-cut tailpipe with internal rolled lip
END TIPS DIMENSION- 100mm
The value refers to the external dimensions of the exhaust end tip
EXHAUST AND END TIPS FINISH - POLISHED
Mirror finishes are highly reflective and created by polishing the stainless steel. The polishing process enhances appearance and consistency, making cleaning easier. A special rolling procedure is used. It is essential to remove deep scratches as any surface defects will be very noticeable on the finished product. it improves corrosion resistance. The polishing eradicates crevices where corrosive particles can lodge themselves
END TIPS NUMBER AND POSITION - 2 CENTRAL
The end tips emerge from the centre
MATERIAL
AISI 304 STAINLESS STEEL
A choice stainless steel ideal for aggressive environments where combustion emissions can cause serious chemical corrosion on other types of metal
MAIN PIPE DIMENSION - 76
This is the diameter in mm of the main pipe of the exhaust system
EXHAUST VALVE
ELECTRIC
The exhaust system is complete with electric valve. The electric actuator is not included and the standard actuator already installed on the car must be used. Control of the original valve is still provided
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
TSPO991GT3RS19.001.A
9GT251052E
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 991 Speedster 4.0L (510Bhp)
- Porsche 991 GT3 4.0L (500 Bhp) / GT3 RS 4.0L (520 Bhp)
£3,600.00 inc. VAT
Now £3,420.00 inc. VAT
Orderable - 16 to 21 Days
Shop Securely
12 Month Warranty
Worldwide Delivery
Request a
Trade Price Match
TSPOGT3C10.093.A
Product Information
Replaces rear side silencers with straight pipes
Fits:
Porsche 911 GT3 and GT3 RS (997 Gen 1 and Gen 2)
Porsche 911 GT3 and GT3 RS (991.1 and 991.2 upto 2019)
This product can be mounted on every GT3, GTR RS, GT3 RS 4.0 versions, both on 997 Gen 1, Gen 2 and on 991.1 and 991.2 up to 2019
The component is perfectly interchangeable with the original components, following the instructions in the constructor's workshop manual
RACETRACK USE ONLY
These components are designed and developed for racetrack use and to maximise the car's performance. They are not street legal and must be installed by professionals in the sector
SOUND - STRAIGHT PIPE
The straight pipe version guarantees a direct path from the engine, removing all factors which may affect the acoustic tuning
SYSTEM FINISH - POLISHED
Mirror finishes are highly reflective and created by polishing the stainless steel. The polishing process enhances appearance and consistency, making cleaning easier. A special rolling procedure is used. It is essential to remove deep scratches as any surface defects will be very noticeable on the finished product. it improves corrosion resistance. The polishing eradicates crevices where corrosive particles can lodge themselves
MATERIAL - AISI 304 STAINLESS STEEL
A choice stainless steel ideal for aggressive environments where combustion emissions can cause serious chemical corrosion on other types of metal
MAIN PIPE DIMENSION - 65mm
This is the diameter in mm of the main pipe of the exhaust system
Product Information
Sports exhaust side silencer straight pipe with valves.Replaces rear side silencers with straight pipes
Fits:
Porsche 911 GT3 and GT3 RS (997 Gen 1 and Gen 2)
Porsche 911 GT3 and GT3 RS (991.1 and 991.2 upto 2019)
This product can be mounted on every GT3, GTR RS, GT3 RS 4.0 versions, both on 997 Gen 1, Gen 2 and on 991.1 and 991.2 up to 2019
The component is perfectly interchangeable with the original components, following the instructions in the constructor's workshop manual
RACETRACK USE ONLY
These components are designed and developed for racetrack use and to maximise the car's performance. They are not street legal and must be installed by professionals in the sector
SOUND - STRAIGHT PIPE
The straight pipe version guarantees a direct path from the engine, removing all factors which may affect the acoustic tuning
SYSTEM FINISH - POLISHED
Mirror finishes are highly reflective and created by polishing the stainless steel. The polishing process enhances appearance and consistency, making cleaning easier. A special rolling procedure is used. It is essential to remove deep scratches as any surface defects will be very noticeable on the finished product. it improves corrosion resistance. The polishing eradicates crevices where corrosive particles can lodge themselves
MATERIAL - AISI 304 STAINLESS STEEL
A choice stainless steel ideal for aggressive environments where combustion emissions can cause serious chemical corrosion on other types of metal
MAIN PIPE DIMENSION - 65mm
This is the diameter in mm of the main pipe of the exhaust system
Vehicle Group
Vehicle Group
- Porsche 997 GT3 2007>>
- Porsche 997 MKII GT3 2010>>
- Porsche 991 GT3 3.8L (475Bhp)
- Porsche 991 GT3 RS 4.0L (500Bhp)
- Porsche 991 GT3 4.0L (500 Bhp) / GT3 RS 4.0L (520 Bhp)
£1,830.77 inc. VAT
Now £1,739.23 inc. VAT
Orderable - 16 to 21 Days
Shop Securely
12 Month Warranty
Worldwide Delivery
Request a
Trade Price Match
TSPO991T16.001.A
Product Information
Fits
Porsche 991.2 Carrera S 2015-2019
RACETRACK USE ONLY
These components are designed and developed for racetrack use and to maximise the car's performance. They are not street legal and must be installed by professionals in the sector
INSTALLATION
The Carrera S exhaust system differs from the Carrera one in that it is equipped with bypass valves.
The component is perfectly interchangeable with the original components, following the instructions in the constructor's workshop manual
SOUND - TUBI SOUND
Tubi Sound is the standard sound of Tubi Style exhausts, louder and more powerful than the original sound. This sound represents our brand
END TIPS DESIGN - OE
The muffler must be used in conjunction with the original exhaust end tips
EXHAUST FINISH - POLISHED
Mirror finishes are highly reflective and created by polishing the stainless steel. The polishing process enhances appearance and consistency, making cleaning easier. A special rolling procedure is used. It is essential to remove deep scratches as any surface defects will be very noticeable on the finished product. it improves corrosion resistance. The polishing eradicates crevices where corrosive particles can lodge themselves
END TIPS NUMBER AND POSITION
2 + 2 AT THE SIDES
The tailpipes are located low down at the sides of the car. There are two tailpipes at each side
MATERIAL - AISI 304 STAINLESS STEEL
A choice stainless steel ideal for aggressive environments where combustion emissions can cause serious chemical corrosion on other types of metal
Product Information
Sports exhaust standard silencer Porsche 991.2 Carrera S 2015-2019Fits
Porsche 991.2 Carrera S 2015-2019
RACETRACK USE ONLY
These components are designed and developed for racetrack use and to maximise the car's performance. They are not street legal and must be installed by professionals in the sector
INSTALLATION
The Carrera S exhaust system differs from the Carrera one in that it is equipped with bypass valves.
The component is perfectly interchangeable with the original components, following the instructions in the constructor's workshop manual
SOUND - TUBI SOUND
Tubi Sound is the standard sound of Tubi Style exhausts, louder and more powerful than the original sound. This sound represents our brand
END TIPS DESIGN - OE
The muffler must be used in conjunction with the original exhaust end tips
EXHAUST FINISH - POLISHED
Mirror finishes are highly reflective and created by polishing the stainless steel. The polishing process enhances appearance and consistency, making cleaning easier. A special rolling procedure is used. It is essential to remove deep scratches as any surface defects will be very noticeable on the finished product. it improves corrosion resistance. The polishing eradicates crevices where corrosive particles can lodge themselves
END TIPS NUMBER AND POSITION
2 + 2 AT THE SIDES
The tailpipes are located low down at the sides of the car. There are two tailpipes at each side
MATERIAL - AISI 304 STAINLESS STEEL
A choice stainless steel ideal for aggressive environments where combustion emissions can cause serious chemical corrosion on other types of metal
Vehicle Group
Vehicle Group
- Porsche 991 Carrera 2S 3.0L (420 Bhp)
- Porsche 991 Carrera 4S 3.0L (420 Bhp)
£2,746.16 inc. VAT
Now £2,608.85 inc. VAT
Orderable - 16 to 21 Days
Shop Securely
12 Month Warranty
Worldwide Delivery
Request a
Trade Price Match
9996001111
Product Information
Fits:
All Porsche models with vacuum operated valvetronic exhaust systems
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
9996001111
The product you are viewing cross references to these numbers
Product Information
Switch set for sound valves.Fits:
All Porsche models with vacuum operated valvetronic exhaust systems
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
9996001111
98622094335SSOUND
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche Boxster 987 2.7L 2005 -08/08
- Porsche Boxster 987 S 3.2/3.4L 2005-08/08
- Porsche Boxster 987 MKII 2.9L 2009-2012
- Porsche Boxster S 987 MKII 3.4L 2009-2012
- Porsche Boxster 981 2.7L 2012-16
- Porsche Boxster S 981 3.4L 2012-16
- Porsche Boxster 718 2.0L Manual (300 Bhp)
- Porsche Boxster 718 2.0L PDK (300 Bhp)
- Porsche Boxster S 718 2.5L Manual (350 Bhp)
- Porsche Boxster S 718 2.5L PDK (350 Bhp)
- Porsche Boxster T 718 2.0L Manual (300 Bhp)
- Porsche Boxster T 718 2.0L PDK (300 Bhp)
- Porsche Boxster GTS 718 2.5L Manual (365 Bhp)
- Porsche Boxster GTS 718 2.5L PDK (365 Bhp)
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 Carrera 2S 3.8L 2005>>
- Porsche 997 Carrera 4 3.6L 2005>>
- Porsche 997 Carrera 4S 3.8L 2005>>
- Porsche 997 TURBO 2007>>
- Porsche 991 Carrera C2 3.4L (350Bhp)
- Porsche 991 Carrera C2S 3.8L (400Bhp)
- Porsche 991 Carrera C4 3.4L (350Bhp)
- Porsche 991 Carrera C4S 3.8L (400Bhp)
- Porsche 991 Turbo 3.8L (520bhp)
- Porsche 991 Turbo S 3.8L (560Bhp)
- Porsche 991 Carrera 2 3.0L (370 Bhp)
- Porsche 991 Carrera 2S 3.0L (420 Bhp)
- Porsche 991 Carrera 4 3.0L (370 Bhp)
- Porsche 991 Carrera 4S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 2 3.0L (370 Bhp)
- Porsche 991 Cabriolet 2S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 4 3.0L (370 Bhp)
- Porsche 991 Cabriolet 4S 3.0L (420 Bhp)
- Porsche 991 Targa 4 3.0L (370 Bhp)
- Porsche 991 Targa 4S 3.0L (420 Bhp)
- Porsche 991 Turbo Coupe 3.8L (540 Bhp)
- Porsche 991 Turbo S Coupe 3.8L (580 Bhp)
- Porsche 991 Turbo Cabriolet 3.8L (540 Bhp)
- Porsche 991 Turbo S Cabriolet 3.8L (580 Bhp)
- Porsche Cayman 2.7L 987C 2006-08
- Porsche Cayman S 3.4L 987C 2005-08
- Porsche Cayman 2.9L 987C MKII 2009-12
- Porsche Cayman S / R 3.4L 987C MKII 2009-12
- Porsche Cayman 2.7L 981 2013-16
- Porsche Cayman S 3.4L 981 2013-16
- Porsche Cayman 718 2.0L Manual (300Bhp)
- Porsche Cayman 718 2.0L PDK (300Bhp)
- Porsche Cayman S 718 2.5L Manual (350Bhp)
- Porsche Cayman S 718 2.5L PDK (350Bhp)
- Porsche Cayman T 718 2.0L Manual (300Bhp)
- Porsche Cayman T 718 2.0L PDK (300 Bhp)
- Porsche Cayman GTS 718 2.5L Manual (365 Bhp)
- Porsche Cayman GTS 718 2.5L PDK (365 Bhp)
£100.00 inc. VAT
Now £85.00 inc. VAT
In Stock - 24 Hour Dispatch
Shop Securely
12 Month Warranty
Worldwide Delivery
Request a
Trade Price Match
DISPLAYING 1 to 11 (of 11 products)
Also found on these pages
About Switchable Silencers / Mufflers
Title: Upgrading Your Porsche's Exhaust System: Original Porsche vs. Aftermarket Mufflers and Sports Exhaust
Keywords: Porsche, exhaust mufflers, sports exhaust, upgrade, replacement, technical specifications, known issues, Design911, professional advice
Summary:
Original Porsche Exhaust Mufflers:
Designed and manufactured by Porsche for specific models
Engineered to meet stringent quality standards
Precisely tuned for optimal performance and sound
Maintains the authenticity and originality of your Porsche
Compatible with existing components and systems
Aftermarket Exhaust Mufflers:
Produced by third-party manufacturers specializing in performance upgrades
Offer a wide range of options for customization
Can enhance exhaust note, performance, and aesthetics
May provide better flow dynamics for improved engine efficiency
Consider compatibility and fitment with your Porsche model
Sports Exhaust Systems:
Designed to maximize performance and enhance the driving experience
Typically include larger diameter pipes, sportier mufflers, and optimized airflow
Offer increased horsepower and torque
Produce a more aggressive and exhilarating exhaust sound
Check local regulations regarding noise restrictions
When considering purchasing an exhaust muffler or sports exhaust for your Porsche, several factors should be considered. Firstly, determine your specific requirements, whether it's a slight improvement in sound or a significant performance boost. Research the technical specifications and compatibility of the chosen exhaust system with your Porsche model. Consider your budget and the reputation of the manufacturer or retailer. It's crucial to ensure the product is backed by warranties or guarantees.
At Design911, we can assist you in finding the correct exhaust part for your Porsche. Our knowledgeable team can offer professional advice based on your requirements and guide you through the selection process. We stock a wide range of original Porsche parts as well as reputable aftermarket options, ensuring you have access to high-quality choices. Trust Design911 to help you enhance your Porsche's performance and provide an unmatched driving experience.
Note: The summary provided above is a general overview of the benefits and considerations related to upgrading the exhaust system of a Porsche vehicle. It's always recommended to consult with a professional and consider individual vehicle specifications and regulations before making any modifications.
You may also like
-
Standard Silencers / Mufflers
-
Sport Silencers / Mufflers
-
All Silencers / Mufflers
-
Catalyst / Bypass
-
Manifold / Headers
-
Exhaust Tail Pipes
-
Heat Exchangers
-
Exhaust Package
-
Exhaust Gaskets
-
Exhaust Nuts / Bolts / Studs
-
Brackets / Clamps / Straps
-
Exhaust Fitting Kits
-
Sport Exhaust Vacuum Parts
-
Remus Exhaust
-
Akrapovic Exhaust
-
Fabspeed Exhaust
-
BBi Autosport Exhaust
-
Tubi Exhaust
-
Lambda Sensors / Probes
-
Lambda Sensor Extensions
Popular Models
