Coil Springs FRONT

Standard replacement coil spring - suitable for Rear-wheel drive models equipped with a Standard suspension (option code: 1BH).

Sold individually – two springs are required per front axle.
We strongly recommend replacing coil springs in pairs. 

Fits:
Porsche 992.1 (911) Carrera 2 / 2S / GTS 2019 - 2024 
Porsche 992.2 (911) Carrera 2 / GTS 2024 >>
* For cars with and without adaptive suspension
* For cars with Comfort equipment (option code: A8C)
* For cars with Sports equipment (option code: A8F)
* For cars with Suspension/shock absorption, Standard 2 (option code: 1BH)

Diagram ref no 5

This coil spring supports the vehicle’s front suspension by managing compression and rebound during braking, acceleration, and cornering. It helps maintain proper ride height and contributes to predictable handling and driving stability.

Installed between the lower control arm and the front strut assembly, the spring compresses and expands with suspension movement, absorbing road impacts and controlling body motion. Correct spring performance is essential for maintaining tire contact, steering accuracy, and overall ride comfort.

Over time, coil springs can weaken or sag due to constant load, mileage, and road conditions. A worn spring can alter ride height and suspension geometry, affecting handling and tire wear. Replacing tired springs with new components restores factory-style suspension balance and driving confidence.

Replace this part if you experience any of the following:
•  Uneven or sagging front ride height
•  Excessive body roll or unstable handling
•  Cracks, corrosion, or visible spring fatigue
•  Suspension overhaul, shock absorber replacement, or alignment work
•  After significant mileage or heavy track/road use

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

992411105504

The product you are viewing cross references to these numbers

Standard replacement coil spring - suitable for Four-wheel drive models equipped with a Standard suspension (option code: 1BH).

Sold individually – two springs are required per front axle.
We strongly recommend replacing coil springs in pairs. 

Fits:
Porsche 992.1 (911) Carrera 4 / 4S / GTS 2019 - 2024 
Porsche 992.1 (911) Targa 4 / 4S / GTS 2019 - 2024
Porsche 992.2 (911) Carrera 4 GTS 2024 >>
Porsche 992.2 (911) Targa 4 GTS 2024 >>
* For cars with and without adaptive suspension
* For cars with Comfort equipment (option code: A8C)
* For cars with Sports equipment (option code: A8F)
* For cars with Suspension/shock absorption, Standard 2 (option code: 1BH)

Diagram ref no 5

This coil spring supports the front corner of the vehicle, managing suspension compression and rebound during braking, acceleration, and cornering. It helps maintain correct ride height and contributes to stable, predictable handling.

Installed between the lower control arm and the front strut assembly, the spring compresses and expands with suspension travel, absorbing road impacts and controlling body movement. Proper spring function is essential for maintaining tire contact, steering precision, and overall ride quality.

Over time, coil springs can weaken or sag due to constant load, mileage, and road impacts. Replacing a worn spring restores proper ride height and suspension geometry, helping prevent uneven handling, premature tire wear, and reduced driving confidence.

Replace this part if you experience any of the following:
•  Uneven or sagging front ride height
•  Excessive body roll or unstable handling
•  Cracks, corrosion, or visible spring fatigue
•  Suspension overhaul, shock absorber replacement, or alignment work
•  After significant mileage or heavy track/road use

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

992411105A504

The product you are viewing cross references to these numbers

Standard replacement coil springs.
The springs are priced / boxed as a pair.

Identification paint coloured marking Light Blue

Fits:
Porsche 992.1 (911) Carrera 2 / 2S / GTS 2019 - 2024 
Porsche 992.2 (911) Carrera 2 / GTS 2024 >>
* For cars with and without adaptive suspension
* For cars with Comfort equipment (option code: A8C)
* For cars with Sports equipment (option code: A8F)
* For cars with Suspension/shock absorption, Standard 2 (option code: 1BH)

Diagram ref no 5

A genuine Porsche front coil spring set, includes two front coil springs, intended to be installed together on the front axle to maintain correct suspension balance and geometry.

These springs support the full front axle load and control suspension movement during braking, acceleration, and cornering. By replacing both springs as a matched pair, they ensure consistent ride height, even load distribution, and factory-correct handling characteristics. 

Installed between the lower control arms and the front strut assemblies, the coil springs compress and rebound with suspension travel. Their precisely calibrated spring rates work in harmony with Porsche dampers to absorb road impacts, stabilize the vehicle body, and maintain optimal tire contact and steering precision.

Replace this part if you experience any of the following:
•  Uneven or sagging front ride height
•  Excessive body roll or unstable handling
•  Cracks, corrosion, or visible spring fatigue
•  Suspension overhaul, shock absorber replacement, or alignment work
•  After significant mileage or heavy track/road use

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

992411105504

The product you are viewing cross references to these numbers

Standard replacement coil springs.
The springs are priced / boxed as a pair.

Identification paint coloured marking Yellow-green

Fits:
Porsche 992.1 (911) Carrera 4 / 4S / GTS 2019 - 2024 
Porsche 992.1 (911) Targa 4 / 4S / GTS 2019 - 2024
Porsche 992.2 (911) Carrera 4 GTS 2024 >>
Porsche 992.2 (911) Targa 4 GTS 2024 >>
* For cars with and without adaptive suspension
* For cars with Comfort equipment (option code: A8C)
* For cars with Sports equipment (option code: A8F)
* For cars with Suspension/shock absorption, Standard 2 (option code: 1BH)

Diagram ref no 5

A genuine Porsche front coil spring set, includes two front coil springs, intended to be installed together on the front axle to maintain correct suspension balance and geometry.

These springs support the full front axle load and control suspension movement during braking, acceleration, and cornering. By replacing both springs as a matched pair, they ensure consistent ride height, even load distribution, and factory-correct handling characteristics. 

Installed between the lower control arms and the front strut assemblies, the coil springs compress and rebound with suspension travel. Their precisely calibrated spring rates work in harmony with Porsche dampers to absorb road impacts, stabilize the vehicle body, and maintain optimal tire contact and steering precision.

Replace this part if you experience any of the following:
•  Uneven or sagging front ride height
•  Excessive body roll or unstable handling
•  Cracks, corrosion, or visible spring fatigue
•  Suspension overhaul, shock absorber replacement, or alignment work
•  After significant mileage or heavy track/road use

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

992411105A504

The product you are viewing cross references to these numbers