Front Spoilers / Bumpers

SportDesign package. Includes new front apron with new front spoiler and new extendible rear spoiler in a unique design. Please note: Significantly reduced approach/departure angle



Fits:
Porsche 991.2 C2 / C2S 2017>>
Porsche 991.2 C4 / C4S 2017>>
Porsche 991.2 Targa / Targa S 2017>>
Porsche 991.2 Carrera T 2017>>

Options:
- For vehicles without headlight cleaning system and without front or rear ParkAssist
- For vehicles with headlight cleaning system and without front or rear ParkAssist
- For vehicles without headlight cleaning system and with front and rear ParkAssist
- For vehicles with headlight cleaning system and with front and rear ParkAssist

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9910448037

The product you are viewing cross references to these numbers

Original Porsche Aerokit 911 Turbo add-on package



For vehicles with painted side skirts and/or painted rear apron. Add-on kit includes new front spoiler with side fins, new fixed rear spoiler with new automatically extending rear wing, can be painted in exterior colour.

Fits:
Porsche 911 (991.2) Turbo / Turbo S 2017>>

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99104480308

The product you are viewing cross references to these numbers

Carbon fibre front bumper dive plane kit.

Available in Gloss or Matte Carbon Fibre



Fits
Porsche 991.2 GT3 / GT3 RS - 2016 to 2018

The Dive Planes for the Porsche 991.2 GT3/GT3RS were specifically designed to increase front-end downforce, increase the high-pressure airflow to the factory intake duct, and to keep drag increase minimal.

Depending on driver preference, no rear aero is needed to balance out these units. We have seen up to 0.7 second gains due to increased front end grip at high speed corners which allows improved corner speed. If as a driver you feel the car needs more rear stability, we would not suggest these units without adding a rear aerodynamic device.

The units were designed in CAD using scan data and optimized using CFD within ANSYS Fluent.

These units are constructed from 1.5mm thick pre-preg, autoclaved cured, 2x2 twill carbon in both a matte and gloss clear coat.

Dive planes, also referred to as canards, allow you to shift the aero balance forward, possibly aiding you and your setup in balancing out a large rear wing or diffuser.

Kit Includes
• Dive Plane x 4 (Upper x 2, Lower x 2)
• 3M VHB Tape (4 Pieces, 1 for each Dive Plane)
• Install Template

Front bumper air vent grill.
With TÜV parts certificate (§19.3).



Fits:
Porsche 991.1 Carrera / Turbo
Porsche 991.2 Carrera / Turbo

The 991 front bumper air vent grill ensures the best possible aerodynamic properties and is at the same time a beautiful oem+ design element that gives your Porsche a unique appearance.

An important component for both cooling and aerodynamics. Ensuring the rapid removal of hot air. Optimized unit cooling.

This front bumper air vent grill is delivered primed & paint ready. Mounting material is included.

Please note this item is not a stock product. It is a special order part and once ordered with us is not subject to cancellation or return unless proven not fit for purpose or defected.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

P991.20.1010

The product you are viewing cross references to these numbers

Front bumper Canard set in carbon fibre.
Sold as a pair



Fits:
Porsche 991.2 GT3 2018-21


Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

991.2GT3CARBFRTCAN

The product you are viewing cross references to these numbers

Front bumper canards in high gloss carbon fibre. 



Fits:

Porsche 991.1 911 GT3
Porsche 991.1 911 GT3RS
Porsche 991.1 911 R
Porsche 991.2 911 GT2RS

Designed to increase downforce to front end in conjunction these front bumper canards (dive planes) are made using pre-preg autoclave carbon fiber with a high gloss finish. 

Installation can be done with double sided tape to prevent the drilling of holes into factory front bumper.

Front bumper lower splitter kit. 



Fits:

Porsche 991.2 GT3 RS

Front splitters are very effective at producing front end downforce without significantly increasing drag and this is done by creating a large pressure delta between the top and bottom surfaces. We then incrementally improved the front splitter by adding design tweaks to the underside of the splitter to improve flow with our carbon splitter diffusers. All of this adds up to a front splitter kit for the 991.1 GT3RS that creates a large amount of additional front end downforce.

The splitter is produced from a carbon thermoplastic, which is the same material used in high forms of Motorsports. The material is not brittle, so no more issues with cracking like carbon fiber and ABS. It will not grab and bend under the car like aluminum units either. It is a great splitter material.

Bracketry was designed from scan data, precision cut and bent to ensure repeatability. The carbon diffusers were developed in CFD to promote flow and improve downforce generation. The splitter was designed to balance out large rear wings, more specifically our V1x for the chassis.

Kit Includes

• Carbon Polyweave Splitter 
• Polyweave Grind Strake x 4
• Carbon Splitter Diffuser x 2
• Sheet Aluminum Diffuser Block Off x 2
• Sheet Metal Bracket Kit x 13
• Steel Cross Beam Tube 
• Clevis x 4
• Splitter Support Rod Assy x 2
• Hardware Kit, Including all Hardware Necessary for a Seamless Install

Features
Greatly Increases Front End Downforce
Produces High Downforce for Large Rear Wings
Capable of Handling 300+ Lbs
Constructed From Carbon Thermoplastic, Which Offers Strength, Low Weight, Durability, and a Great Appearance
Same Material Used in Various Forms of Racing, Including Indy Car, NASCAR, and F1
Non-Invasive / Easy Install

Specifications
Front Splitter is Manufactured From Carbon Thermoplastic, Offering Superior Strength, Weight, Durability, and Appearance to Many Other Options
Will Not Grab and Bend Surfaces Like Aluminum Units
Will Not Crack and Break Like Carbon and ABS Units
Abrasive Resistant While Stiff
CNC Cut and Bent Brackets
Stainless Hardware Throughout

Front bumper lower spoiler in high gloss carbon fibre. 



Fits:

Porsche 991.2 911 GT2 RS

The front bumper lower spoiler is designed to increase downforce at the front end, creating increased stability and handling.  

Made of pre-preg autoclave carbon fiber construction with a high glossy finish.

Carbon fibre Front bumper lower spoiler.
Manufactured in carbon fibre prepreg autoclave molded at high temperature & pressure with twill 2×2, 200 gr. fabric. Finish clearcote gloss.



Fits:
Porsche 991.1 Turbo
Porsche 991.2 Turbo
Please note: SF/C/991-505-525-02-G2X/TURBOMK1

Install as replacement of oem front spoiler, does not replace lower inflatable spoiler.


Please note: This is a special-order item manufactured to order. In some cases, please allow 4 – 5 weeks for the delivery. Special order items cannot be cancelled from this supplier once your order has been placed.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

SFC99150552502G2X

The product you are viewing cross references to these numbers

Front bumper lower spoiler.
This comes Primed and will need to be painted.



Fits:
Porsche 991.2 GTS
Porsche 991.2 Cars with Sport Design package
Optional equipment codes: IXAS / IXAS

Click 'Zoom in' for large parts diagram.
Diagram ref no 3

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99150598305G2X

The product you are viewing cross references to these numbers