Engine Block Hoses

Coolant Hose, Feed.
The Coolant Hose, Feed is a genuine Porsche coolant hose designed to carry pressurised engine coolant through the cooling system feed circuit. This hose helps maintain correct coolant flow between key cooling components, supporting stable engine operating temperatures and proper heater performance. It is an OE MATCH replacement part used on Porsche 970.2 Panamera models.

Fits:

• Porsche 970.2 Panamera S V6 Turbo 3.0L 2WD (420Hp) 2014-16
• Porsche 970.2 Panamera S V6 Turbo 3.0L 2WD Executive 2014-16  

Diagram Ref No 4 (Diagram Ref No 5 and 6 Sold Separately)

What This Product Does:

• Feeds engine coolant through the cooling circuit to ensure proper circulation.
• Helps maintain stable engine operating temperature by allowing coolant to move efficiently through the system.
  
• Supports the heater circuit, helping deliver hot coolant needed for cabin heating via the heater core.
  
• Provides a flexible connection that absorbs engine movement and heat expansion, reducing stress on rigid pipes and fittings.
  
  

Symptoms Of Wear Or Failure:

• Coolant may seep or drip from the hose itself or from the connection points/clamps.
• Repeatedly needing to top up coolant is a strong sign the hose may be leaking
• A leaking or weakened hose can reduce coolant circulation and system pressure, causing overheating.
• A noticeable coolant smell around the engine bay or under the vehicle often indicates a small leak.
• Visual inspection may show cracking, bulging , deterioration, hardened rubber
  
• If coolant flow is restricted or low, the heater may blow lukewarm or cold air.
• Many Porsche models will trigger a coolant level warning when a hose begins to fail.

Why Replacement Matters:

• Prevents coolant leaks that can lead to low coolant levels and loss of pressure.
  
• Helps avoid engine overheating, which can cause serious engine damage and expensive repairs.
  
• Maintains reliable heater performance, since the cabin heater depends on proper coolant flow.
  
• Protects other cooling system components by preventing air entering the system and reducing strain on the water pump and pipes.
  
• Improves reliability, especially since coolant hoses degrade over time from heat cycles and pressure.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

94610645760

The product you are viewing cross references to these numbers

Coolant Hose, Return.


Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

97010650160

The product you are viewing cross references to these numbers

Coolant Hose, Return.


Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

97010650160

The product you are viewing cross references to these numbers

Coolant Hose.
Seal Included.

Fits:
Porsche 92A Cayenne (958) 3.0L Diesel 2011>>2018
Cars With Engine Codes:
D1V / D43 / D50 / D51 / DV7

Porsche 970 Panamera MKI / MKII 3.0L Diesel 2010>>2016
Cars With Engine Codes:
CRCC / CRCB / CWJA 

Diagram Ref No 14
(Diagram Ref No 15 Included)

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

95810607100

The product you are viewing cross references to these numbers

Coolant Hose.

The Coolant Hose is a genuine Porsche cooling system component designed to maintain consistent coolant flow throughout the engine’s cooling circuit. Engineered to operate under high temperatures and continuous system pressure, this hose plays a crucial role in regulating engine temperature and preventing overheating.

Fits:

• Porsche 958 Cayenne V6 3.0L Diesel (245Hp) 2012-17
• Porsche 970.1 Panamera Diesel V6 3.0L 2011-13
• Porsche 970.2 Panamera Diesel V6 3.0L (250Hp) 2014-16
• Porsche 95B.1 Macan S Diesel 3.0L V6 (258Bhp) 2014-18  

Diagram Ref No 37

What This Product Does:

• Transferring coolant between key cooling system components 
• Maintaining steady coolant circulation
• Supporting correct cooling system pressure
• Helping regulate engine operating temperature
• Preventing overheating during normal and high-load driving conditions

Symptoms Of Wear Or Failure:

• Coolant leaks or fluid visible beneath the vehicle
• Cracked, brittle, swollen, or soft hose material
• Coolant smell from the engine bay
• Low coolant warning light
• Engine overheating or fluctuating temperature readings
• Steam from the engine compartment
• Coolant residue around hose connections

Why Replacement Matters:

• Prevent sudden coolant loss and roadside breakdowns
• Maintain proper coolant circulation and temperature control
• Protect the engine from overheating damage
• Restore cooling system reliability
• Avoid costly repairs caused by heat-related engine failure

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

95810662501

The product you are viewing cross references to these numbers

Coolant Hose.

The Coolant Hose is a OE MATCH cooling system component designed to maintain consistent coolant flow throughout the engine’s cooling circuit. Engineered to operate under high temperatures and continuous system pressure, this hose plays a crucial role in regulating engine temperature and preventing overheating.

Fits:

• Porsche 958 Cayenne V6 3.0L Diesel (245Hp) 2012-17
• Porsche 970.1 Panamera Diesel V6 3.0L 2011-13
• Porsche 970.2 Panamera Diesel V6 3.0L (250Hp) 2014-16
• Porsche 95B.1 Macan S Diesel 3.0L V6 (258Bhp) 2014-18  

Diagram Ref No 37

What This Product Does:

• Transferring coolant between key cooling system components 
• Maintaining steady coolant circulation
• Supporting correct cooling system pressure
• Helping regulate engine operating temperature
• Preventing overheating during normal and high-load driving conditions

Symptoms Of Wear Or Failure:

• Coolant leaks or fluid visible beneath the vehicle
• Cracked, brittle, swollen, or soft hose material
• Coolant smell from the engine bay
• Low coolant warning light
• Engine overheating or fluctuating temperature readings
• Steam from the engine compartment
• Coolant residue around hose connections

Why Replacement Matters:

• Prevent sudden coolant loss and roadside breakdowns
• Maintain proper coolant circulation and temperature control
• Protect the engine from overheating damage
• Restore cooling system reliability
• Avoid costly repairs caused by heat-related engine failure

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

95810662501

The product you are viewing cross references to these numbers

Coolant Hose.
The Coolant Hose is a genuine Porsche OEM engine coolant hose designed to transport coolant through the cooling system on selected Porsche Panamera (970) models. This flexible hose ensures reliable coolant circulation between cooling system components, helping maintain stable engine operating temperatures and effective heater performance. Manufactured to Porsche specifications, it offers precise fitment, high resistance to heat and pressure, and long-term durability.

Fits:

• Porsche 970.2 Panamera S V6 Turbo 3.0L 2WD (420Hp) 2014-16
• Porsche 970.2 Panamera S V6 Turbo 3.0L 2WD Executive 2014-16
• Porsche 970.2 Panamera 4S V6 Turbo 3.0L 4WD (420Hp) 2014-16
• Porsche 970.2 Panamera 4S V6 Turbo 3.0L 4WD Executive 2014-16

  
Diagram Ref No 29 (Diagram Ref No 30 and 31 Included)

What This Product Does:

• Transports pressurised coolant through the cooling circuit to regulate engine temperature.
• Helps maintain proper coolant circulation, allowing heat to be carried away from the engine.
  
• Supports heater operation, since hot coolant flow is needed for the heater core to produce cabin heat.
  
• Provides a flexible connection that absorbs engine vibration and thermal expansion without stressing rigid pipes.
  
  

Symptoms Of Wear Or Failure:

• Coolant may seep or drip from the hose body or from the hose connection points/clamps.
• A leaking hose can cause gradual coolant loss, requiring frequent top-ups.
• Loss of coolant or restricted flow can cause overheating or unstable engine temperatures.
• A sweet coolant odor in the engine bay is a common sign of a leak.
• Common signs include cracks or splits, swelling/bulging, soft spots, hardened or brittle rubber, coolant staining or residue.
  
• If coolant flow is reduced, the heater core may not receive enough hot coolant.
• The vehicle may display coolant level or overheating warnings when the hose begins to fail.

Why Replacement Matters:

• Prevents coolant leaks that cause low coolant levels and loss of cooling system pressure.
  
• Helps avoid engine overheating, which can lead to severe and expensive engine damage.
  
• Restores proper coolant circulation, ensuring efficient cooling performance under all driving conditions.
  
• Maintains reliable cabin heating, since heater performance depends on steady coolant flow.
  
• Protects surrounding components, as leaking coolant can damage sensors, wiring, hoses, and nearby engine parts.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

97010645060

The product you are viewing cross references to these numbers

Coolant Hose.
The Coolant Hose is a OE MATCH engine coolant hose designed to transport coolant through the cooling system on selected Porsche Panamera (970) models. This flexible hose ensures reliable coolant circulation between cooling system components, helping maintain stable engine operating temperatures and effective heater performance. It offers precise fitment, high resistance to heat and pressure, and long-term durability.

Fits:

• Porsche 970.2 Panamera S V6 Turbo 3.0L 2WD (420Hp) 2014-16
• Porsche 970.2 Panamera S V6 Turbo 3.0L 2WD Executive 2014-16
• Porsche 970.2 Panamera 4S V6 Turbo 3.0L 4WD (420Hp) 2014-16
• Porsche 970.2 Panamera 4S V6 Turbo 3.0L 4WD Executive 2014-16

  
Diagram Ref No 29 (Diagram Ref No 30 and 31 Sold Separately)

What This Product Does:

• Transports pressurised coolant through the cooling circuit to regulate engine temperature.
• Helps maintain proper coolant circulation, allowing heat to be carried away from the engine.
  
• Supports heater operation, since hot coolant flow is needed for the heater core to produce cabin heat.
  
• Provides a flexible connection that absorbs engine vibration and thermal expansion without stressing rigid pipes.
  
  

Symptoms Of Wear Or Failure:

• Coolant may seep or drip from the hose body or from the hose connection points/clamps.
• A leaking hose can cause gradual coolant loss, requiring frequent top-ups.
• Loss of coolant or restricted flow can cause overheating or unstable engine temperatures.
• A sweet coolant odor in the engine bay is a common sign of a leak.
• Common signs include cracks or splits, swelling/bulging, soft spots, hardened or brittle rubber, coolant staining or residue.
  
• If coolant flow is reduced, the heater core may not receive enough hot coolant.
• The vehicle may display coolant level or overheating warnings when the hose begins to fail.

Why Replacement Matters:

• Prevents coolant leaks that cause low coolant levels and loss of cooling system pressure.
  
• Helps avoid engine overheating, which can lead to severe and expensive engine damage.
  
• Restores proper coolant circulation, ensuring efficient cooling performance under all driving conditions.
  
• Maintains reliable cabin heating, since heater performance depends on steady coolant flow.
  
• Protects surrounding components, as leaking coolant can damage sensors, wiring, hoses, and nearby engine parts.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

97010645060

The product you are viewing cross references to these numbers

Coolant Hose.
The Coolant Hose is a genuine Porsche OEM engine coolant hose designed to transport coolant through the cooling system on selected Porsche Panamera (970) models. This flexible hose ensures proper coolant circulation between key cooling components, helping maintain stable engine operating temperatures and supporting reliable heater performance. Manufactured to Porsche specifications, it provides precise fitment, high resistance to heat and pressure, and long-term durability.

Fits:

• Porsche 970.2 Panamera S V6 Turbo 3.0L 2WD (420Hp) 2014-16
• Porsche 970.2 Panamera S V6 Turbo 3.0L 2WD Executive 2014-16
• Porsche 970.2 Panamera 4S V6 Turbo 3.0L 4WD (420Hp) 2014-16
• Porsche 970.2 Panamera 4S V6 Turbo 3.0L 4WD Executive 2014-16  

Diagram Ref No 26 (Diagram Ref No 27 And 28 Included)

What This Product Does:

• Transports pressurised coolant through the cooling circuit so heat can be carried away from the engine.
• Helps maintain proper coolant circulation, which is essential for regulating engine temperature.
  
• Supports cabin heating, since hot coolant flow is required for the heater core to produce warm air.
  
• Provides a flexible connection that absorbs engine vibration and thermal expansion without stressing rigid pipes.
  
  

Symptoms Of Wear Or Failure:

• Coolant may seep or drip from the hose body or around the hose connection points, often leaving wet staining or dried residue.
• A leaking hose can cause gradual coolant loss, leading to frequent topping up.
• If coolant flow is reduced or coolant is lost, the engine may run hotter than normal or fluctuate in temperature.
• A noticeable sweet smell in the engine bay or near the vehicle often indicates a coolant leak.
• Common signs include cracking or splitting, swelling or bulging, soft spots, hardened or brittle rubber, coolant residue around the hose surface.
  
• If coolant circulation is affected, the heater core may not receive enough hot coolant.
• The vehicle may display low coolant or overheating warnings when hose failure begins.

Why Replacement Matters:

• Prevents coolant leaks that cause low coolant levels and loss of system pressure.
  
• Helps avoid engine overheating, which can lead to serious and expensive engine damage.
  
• Restores proper coolant circulation, ensuring the cooling system performs efficiently under all driving conditions.
  
• Maintains reliable cabin heating, since the heater core depends on hot coolant flow.
  
• Protects surrounding components, as leaking coolant can damage sensors, wiring, seals, and nearby engine parts.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

97010645160

The product you are viewing cross references to these numbers

Coolant Hose.
The Coolant Hose is a OE MATCH engine coolant hose designed to transport coolant through the cooling system on selected Porsche Panamera (970) models. This flexible hose ensures proper coolant circulation between key cooling components, helping maintain stable engine operating temperatures and supporting reliable heater performance. It provides precise fitment, high resistance to heat and pressure, and long-term durability.

Fits:

• Porsche 970.2 Panamera S V6 Turbo 3.0L 2WD (420Hp) 2014-16
• Porsche 970.2 Panamera S V6 Turbo 3.0L 2WD Executive 2014-16
• Porsche 970.2 Panamera 4S V6 Turbo 3.0L 4WD (420Hp) 2014-16
• Porsche 970.2 Panamera 4S V6 Turbo 3.0L 4WD Executive 2014-16  

Diagram Ref No 26 (Diagram Ref No 27 And 28 Sold Separately)

What This Product Does:

• Transports pressurised coolant through the cooling circuit so heat can be carried away from the engine.
• Helps maintain proper coolant circulation, which is essential for regulating engine temperature.
  
• Supports cabin heating, since hot coolant flow is required for the heater core to produce warm air.
  
• Provides a flexible connection that absorbs engine vibration and thermal expansion without stressing rigid pipes.
  
  

Symptoms Of Wear Or Failure:

• Coolant may seep or drip from the hose body or around the hose connection points, often leaving wet staining or dried residue.
• A leaking hose can cause gradual coolant loss, leading to frequent topping up.
• If coolant flow is reduced or coolant is lost, the engine may run hotter than normal or fluctuate in temperature.
• A noticeable sweet smell in the engine bay or near the vehicle often indicates a coolant leak.
• Common signs include cracking or splitting, swelling or bulging, soft spots, hardened or brittle rubber, coolant residue around the hose surface.
  
• If coolant circulation is affected, the heater core may not receive enough hot coolant.
• The vehicle may display low coolant or overheating warnings when hose failure begins.

Why Replacement Matters:

• Prevents coolant leaks that cause low coolant levels and loss of system pressure.
  
• Helps avoid engine overheating, which can lead to serious and expensive engine damage.
  
• Restores proper coolant circulation, ensuring the cooling system performs efficiently under all driving conditions.
  
• Maintains reliable cabin heating, since the heater core depends on hot coolant flow.
  
• Protects surrounding components, as leaking coolant can damage sensors, wiring, seals, and nearby engine parts.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

97010645160

The product you are viewing cross references to these numbers

Coolant pipe heater.



Fits:
Porsche 970 Panamera 4.8L 2009-16
Porsche 958 Cayenne 4.8L 2010-18

Click 'Zoom in' for large parts diagram.
Diagram ref no 8

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

94810606921

The product you are viewing cross references to these numbers

Coolant Pipe, Heater.
The Coolant Pipe, Heater is a genuine Porsche coolant line designed to route engine coolant through the vehicle’s heating and cooling system. Positioned at the front of the cooling circuit, this pipe helps deliver coolant flow required for proper engine temperature regulation and effective cabin heating performance. It is an OE  replacement part used on various Porsche models including Cayenne, Macan, and Panamera applications.

Fits:

• Porsche 958 Cayenne V6 3.6L Petrol 300Hp 2010-17
• Porsche 970.2 Panamera S V6 Turbo 3.0L 2WD (420Hp) 2014-16
• Porsche 970.2 Panamera S V6 Turbo 3.0L 2WD Executive 2014-16
• Porsche 95B.1 Macan S Petrol 3.0L V6 340Bhp 2014-18
• Porsche 95B.1 Macan GTS Petrol 3.0L V6 360Bhp 2014-18
• Porsche 95B.1 Macan Turbo 3.6L V6 400Bhp 2014-18

Diagram Ref No 8 (Diagram Ref No 9 and 10 Included)

What This Product Does:

• Routes engine coolant through the cooling circuit to maintain correct operating temperature.
• Supports the heater coolant circuit, helping supply hot coolant to the heater core so the cabin heating system can produce warm air.
  
• Helps maintain proper cooling system pressure and flow, which is essential for preventing overheating and ensuring stable engine performance.
  
  

Symptoms Of Wear Or Failure:

• Visible coolant dripping or wet staining around the pipe, joints, or connection points is the most common sign.
• The coolant reservoir may repeatedly drop even if no obvious leak is seen right away.
• A leaking or restricted coolant pipe can reduce coolant circulation, causing overheating.
• If coolant flow to the heater circuit is reduced, the heater may blow lukewarm or cold air.
• You may notice a sweet coolant odor in the engine bay or sometimes through the vents.
• Modern Porsche models may trigger coolant level warnings or engine temperature alerts when coolant loss occurs.

Why Replacement Matters:

• Prevents coolant leaks that can lead to low coolant levels and system pressure loss.
  
• Helps avoid engine overheating, which can cause serious and expensive engine damage.
  
• Restores reliable cabin heating, since proper coolant flow is needed to supply the heater core.
  
• Protects the cooling system overall, reducing stress on hoses, seals, and other cooling components caused by leaks or air entering the system.
  
• Maintains safe, stable engine operation, especially under load or long driving conditions.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

94610606960

The product you are viewing cross references to these numbers

Coolant Pipe, Heater.
The Coolant Pipe, Heater is a OE MATCH coolant line designed to route engine coolant through the vehicle’s heating and cooling system. Positioned at the front of the cooling circuit, this pipe helps deliver coolant flow required for proper engine temperature regulation and effective cabin heating performance. It is an alternative replacement part used on various Porsche models including Cayenne, Macan, and Panamera applications.

Fits:

• Porsche 958 Cayenne V6 3.6L Petrol 300Hp 2010-17
• Porsche 970.2 Panamera S V6 Turbo 3.0L 2WD (420Hp) 2014-16
• Porsche 970.2 Panamera S V6 Turbo 3.0L 2WD Executive 2014-16
• Porsche 95B.1 Macan S Petrol 3.0L V6 340Bhp 2014-18
• Porsche 95B.1 Macan GTS Petrol 3.0L V6 360Bhp 2014-18
• Porsche 95B.1 Macan Turbo 3.6L V6 400Bhp 2014-18

Diagram Ref No 8 (Diagram Ref No 9 and 10 Included)

What This Product Does:

• Routes engine coolant through the cooling circuit to maintain correct operating temperature.
• Supports the heater coolant circuit, helping supply hot coolant to the heater core so the cabin heating system can produce warm air.
  
• Helps maintain proper cooling system pressure and flow, which is essential for preventing overheating and ensuring stable engine performance.
  
  

Symptoms Of Wear Or Failure:

• Visible coolant dripping or wet staining around the pipe, joints, or connection points is the most common sign.
• The coolant reservoir may repeatedly drop even if no obvious leak is seen right away.
• A leaking or restricted coolant pipe can reduce coolant circulation, causing overheating.
• If coolant flow to the heater circuit is reduced, the heater may blow lukewarm or cold air.
• You may notice a sweet coolant odor in the engine bay or sometimes through the vents.
• Modern Porsche models may trigger coolant level warnings or engine temperature alerts when coolant loss occurs.

Why Replacement Matters:

• Prevents coolant leaks that can lead to low coolant levels and system pressure loss.
  
• Helps avoid engine overheating, which can cause serious and expensive engine damage.
  
• Restores reliable cabin heating, since proper coolant flow is needed to supply the heater core.
  
• Protects the cooling system overall, reducing stress on hoses, seals, and other cooling components caused by leaks or air entering the system.
  
• Maintains safe, stable engine operation, especially under load or long driving conditions.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

94610606960

The product you are viewing cross references to these numbers

Coolant Pipe, Return.


Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

94610642160

The product you are viewing cross references to these numbers

Coolant Pipe, Return.


Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

94610642160

The product you are viewing cross references to these numbers

Coolant Pipe.
The Coolant Pipe is a genuine Porsche OEM cooling system component designed to route engine coolant within the closed-loop cooling circuit. This rigid coolant pipe directs overflow and circulating coolant between key cooling system components, including the engine and expansion reservoir, helping maintain proper pressure balance and stable engine operating temperatures. Manufactured to Porsche specifications, it provides precise fitment, high resistance to heat and pressure, and long-term durability for Porsche Panamera (970) models.

Fits:

• Porsche 970.1 Panamera V6 3.6L 2WD 2009-13
• Porsche 970.1 Panamera 4 V6 3.6L 4WD 2009-13
• Porsche 970.1 Panamera S V8 4.8L 2009-13
• Porsche 970.1 Panamera 4S V8 4.8L 2009-13
• Porsche 970.1 Panamera GTS V8 4.8L 2011-13
• Porsche 970.1 Panamera Turbo V8 4.8L 2009-13
• Porsche 970.1 Panamera Turbo S V8 4.8L 2009-13
• Porsche 970.2 Panamera S V6 Turbo 3.0L 2WD (420Hp) 2014-16
• Porsche 970.2 Panamera S V6 Turbo 3.0L 2WD Executive 2014-16
• Porsche 970.2 Panamera 4S V6 Turbo 3.0L 4WD (420Hp) 2014-16
• Porsche 970.2 Panamera 4S V6 Turbo 3.0L 4WD Executive 2014-16  

Diagram Ref No 14

What This Product Does:

• Transfers engine coolant through the cooling circuit, helping move heat away from the engine.
• Routes overflow or return coolant back toward the expansion/reservoir tank as part of the closed-loop system.
  
• Helps maintain proper cooling system pressure and balance during temperature changes.
  
• Provides a secure, rigid connection between cooling components to ensure reliable coolant flow.
  
  

Symptoms Of Wear Or Failure:

• Coolant may drip or seep from the pipe body, joints, or connection points, often leaving visible residue or staining.
• A leaking coolant pipe can cause gradual coolant loss, requiring frequent top-ups.
• Loss of coolant or pressure imbalance can reduce cooling efficiency and cause temperature instability.
• A noticeable coolant odor in the engine bay often indicates leakage from the cooling system.
• Signs may include cracked plastic sections, corrosion on metal pipe sections, damaged or worn sealing areas, loose or degraded connection points.
  
• Low coolant or overheating warnings may appear if the pipe begins to fail.

Why Replacement Matters:

• Prevents coolant leaks that can lead to low coolant levels and reduced system pressure.
  
• Helps avoid engine overheating, which can result in serious and costly engine damage.
  
• Restores proper coolant routing, ensuring efficient heat transfer throughout the cooling circuit.
  
• Maintains cooling system integrity, preventing air intrusion and pressure imbalance.
  
• Protects surrounding components, as leaking coolant can damage hoses, wiring, sensors, and engine parts.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

97010604400

The product you are viewing cross references to these numbers