McLaren

iCarsoft CR V2.0 Professional Diagnostic Tool for Multi Brand Vehicles

Please note: this is an electronic unit, once this is registered to the user or used it will not be able to return, ICarsoft will be able to give you product support should you require this.  

Display: 4.0″ TFT LCD, 480*320 Pixels
Operation Temperature: 0°C ~ 50°C
Storage Temperature: -20°C ~ 70°C
Operating Voltage: 9 ~ 18V
Operating Current: 150mA@12V (Typical)
Power Consumption: 1.8W (Typical)
Dimension: 206*104.1*32.6 mm (L x W x H)

Contents:
CR V2.0 (1+4) Main Unit
TF card (In the main unit)
Main Cable
Data Cable
User Manual

Product Features

1. iCarsoft CR V2.0(1+4) can do it all-reads and clears trouble codes on most of the systems such as engine, transmission, ABS and airbag etc.
2. Support OBDII/EOBD Ten Modes of Operation
3. Read Live Data
4. Full ECU Diagnosis
5. Applies to the single Brand of most of the Models which equipped with OBDII-16 DLC
6. Easy To Use With Silicone Keys
7. Oil Light/Service Reset: Support service lamp reset.
8. Electronic Parking Brake (EPB) system maintenance deactivates and reactivates the EPB system for replacement and initialization.
9. Battery Management System (BMS), registers new battery to the BMS while battery replacement.
10. Diesel Particulate Filter (DPF) regeneration control system, requests the DPF regeneration process while DPF blockage and turn off the DPF indicator.
11. Electronic Throttle Control system (ETC) relearns the throttle va value while clear or replaces the throttle valve.
12. SAS: Steering Angle Sensor (SAS) calibration, calibrates the steering wheel to straight ahead, or recalibrates SAS while steering part replacement.
13. ABS Bleeding, release the air to restore ABS Brake sensitivity, or relearn while ABS replaced.
14. Injector coding, relearn the injector control parameter while the injector renewed or replaced
15. The Print Data function allows you printing out diagnostic data recorded by the scan
16. Battery test allows you getting the voltage of battery with OBD port by the scan tool when the engine starts.
17. DTC Library to lookup when user is operating this tool.
18. Upgrade Via PC
19. Multi-language: English, German, Dutch, Spanish, French.

OBDII Function

• Read Codes
• Erase Codes
• I/M Readiness -- I/M Readiness indicate whether or not the various emissions-related systems on the vehicle are operating properly and are ready for Inspection and Maintenance testing.
• Data stream.
• Freeze Frame -- When an emission-related fault occurs, certain vehicle conditions are recorded by the on-board computer. This information is referred to as freeze frame data. Freeze Data is a snapshot of the operating conditions at the time of an emission-related fault.
• O2 Sensor Test -- This option allows retrieval and viewing of O2 sensor test results for most recently performed tests from the vehicle's on-board computer.
• On-Board Monitoring -- This function can be utilized to read the results of on-board diagnostic monitoring tests for specific components/systems.
• Evap System Test -- The EVAP test function lets you initiate a leak test for the vehicle's EVAP system. Before using the system test function, refer to the vehicle's service repair manual to determine the procedures necessary to stop the test.
  
• Vehicle Information -- The option displays the vehicle identification number (VIN), the calibration verification number (CVN), and other information of the test vehicle.
• Retrieve generic (P0, P2, P3, and U0), manufacturer specific (P1, P3, and U1) codes and pending codes
• Turn off Check Engine Light (MIL), clear codes and reset monitors
• Read live PCM DataStream 
• Support CAN (Controller Area Network) and all other
• Multilingual menu and DTC definitions- English, Spanish, and German etc.
• Read pending DTCs
• Read permanent DTCs
• DTCs search
• Supports most of the OBDII/EOBD test modes include: CAN, ISO9141, KWP2000, J1850 VPW and J1850 PWM.
• Works on most of 2001 and later OBDII compliant PETROL European vehicles
• Works on most of 2004 and later OBDII compliant DIESEL European vehicles
• Works on most of 1996 and later OBDII compliant US and Asian vehicles
• View & Graph Live Data in Color Graphing and blazing fast refresh rate for better graphing and live data readings.
• Comprehensive Help, Including OBD Parameter, Mode Explanations & More

SmartTOP Roof Top Control for McLaren Spider.



DESIGNED FOR:
McLaren 650S / 12C / 570S / 675LT Spider

One-Touch power convertible top
"One-Touch" convertible top operation allows your top to open or close automatically.

Invert switch logic
Direction of center console top switch can be changed to "pull to open" and "push to close".

Top convenience mode
Turning the ignition on or off does not interrupt convertible top operation.

Top Remote Control
Full automatic one-touch top operation from the original key fob.

Separate window control
Raise and lower the windows separately by remote without activating the top.

Window positions
Window positions (up/down) after top opening programmable.

Comfort window open/close
One-Touch opening/closing of the rear window.

Signature Blinker Setup
Configure functions of the module to meet your personal preferences via our signature blinker setup menu.

Passive Mode
Turn the module off with a quick key sequence when unaltered factory operation is desired. Valet Mode
Lock the top in the closed position with a quick key sequence when needed.

Reversible plug-in installation
Remove any time allowing sale or return of a leased vehicle in its original condition.

Plug-n-Play Wiring harness
Custom designed plug-in-between wiring harness for extremely simple and quick installation included.

USB Port for easy setup / updates
This module can be configured and updated using any Mac or PC.

E13 CERTIFICATION: E13 10R - 03 10070
STANDBY POWER: < 0.1MA
DUAL COLOR LEDS: YES

Universal Air induction kit with 6" Cone filter and alloy billet funnel.

Can be adapted to various vehicles.

Filter height: 6 inch / 15cm
Filter diameter at base: 7 inch / 18cm
Funnel height: 8 inch / 20cm
Filter diameter at base: 3,5 inch / 9cm
Overall height: 13inch / 33cm