Tow Eye Hooks & Tie Downs

Brey Krause Tow Hook for Porsche

 

For all Porsche models that accept screw type tow hooks, Front and Rear

The R-9037 Fold Down Tow Hook installs in seconds and folds down to eliminate protrusion from the car's bodywork. It fits Porsche's with factory screw-type tow hooks (excluding Cayenne models). It has a two inch towing eye, which is required for track events. It is precision CNC machined stainless steel, tig welded, and has a polished shaft and rubber locking rod to prevent loosening.

Material: Stainless steel finish: polished shaft, chrome-finished towing eye
Weight: 1.35 lbs.
Models: For Porsches that come with a factory screw type tow hook, excluding Cayenne models.
Installation: Installs in seconds, directly into the existing tow hook hole.
Miscellaneous: Precision CNC machined shaft and tig welded.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

R-9037

The product you are viewing cross references to these numbers

Motorsport tow strap, Front.

Suitable for:
Porsche 981 Cayman/Boxster and 982 (718) incl. GT4/RS

• Made in Germany !
• Easy mounting in the original thread
• 50 mm loop width
• 2150 kg Tensile strength of the loops
• CNC manufactured high-strength aluminium threaded eyelet

Please note: This Motorsport towing straps should only be used on the race track and not as an alternative to towing on public roads. Furthermore, the tow straps are not suitable for securing a vehicle to a van, trailer or roller dynamometer.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

54631-0

The product you are viewing cross references to these numbers

Motorsport tow strap, Rear.

Suitable for:
Porsche 981 Cayman/Boxster and 982 (718) incl. GT4/RS

• Made in Germany !
• Easy mounting in the original thread
• 50 mm loop width
• 2150 kg Tensile strength of the loops
• CNC manufactured high-strength aluminium threaded eyelet

Please note: This Motorsport towing straps should only be used on the race track and not as an alternative to towing on public roads. Furthermore, the tow straps are not suitable for securing a vehicle to a van, trailer or roller dynamometer.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

54631-0

The product you are viewing cross references to these numbers

Rennline Rear Tie Down

Fits:
Porsche 981 Boxster
Porsche 981 Cayman

Securing a Boxster or Cayman to a trailer is next to impossible without the use of wheel straps that are just about guaranteed to destroy your wheels in time. Save those expensive wheels with a set of inexpensive tie down hooks from Rennline. These hooks have been specifically engineered to bolt to the rear of your 981 and come with any necessary hardware and installation instructions. Hooks are constructed of steel and powder coated red.

Each kit comes with (2) rear hooks.

Note: Also available with intergrated subframe support brace (Not included, but available separately).

Note: Pictures may not show actual product.

Rennline Rear Tie Down



Fits:
Porsche 986 Boxster
Porsche 987 Boxster
Porsche 987 Cayman

Securing a Boxster or Cayman to a trailer is next to impossible without the use of wheel straps that are just about guaranteed to destroy your wheels in time. Save those expensive wheels with a set of inexpensive tie down hooks from Rennline. These hooks have been specifically engineered to bolt to the rear of your 986/987 and come with any necessary hardware and installation instructions. Hooks are constructed of steel and powder coated red.

Each kit comes with (2) rear hooks.

Note: Also available with intergrated subframe support brace (Not included, but available separately).

Note: Pictures may not show actual product.

Rennline Folding Tow Hook - REV2.

The TOW sticker is an optional extra. Not included in price. Available separately.

Fits:
Porsche 981 - Front
Porsche 718 - Front
Porsche 991 - Front
Porsche 991.2 - Front
Porsche Panamera - Front

For 991.1 GT3RS use the "991" option.

For 991.2 GT3RS use the "991.2 GT3" option.

For 718 GT4 use "718" option.

**Does NOT fit 981 GT4 or Spyder. See E19.249 for these models**

Introducing the latest in tow hook innovation: engineered with an increased side load capacity and adjustable-length rigid mount receiver. This tapered stainless loop design incorporates a new locking function to maintain your preferred loop position. Additional features include machined graphics, rotational timing and camera mount compatibility.

Rennline's stainless steel folding race hooks install in minutes on any Porsche with factory screw type removable tow hooks. Unlike the aluminum units on the market that are usually advertised as "for decorative purposes only", Rennline's stainless steel tow hooks are precision machined and will stand up to the extreme abuse seen in any race environment. These pulls have a 2" opening as required by most organized race events and screw directly into the factory bumper pull location. Each hook comes with a rubber bumper to be applied on the back side to insure your bumper cover will never get scratched from hook contact. Keep the corner workers and track officials happy by installing a set of hooks that are both highly visible and highly functional. Why is ours the best:

• Ours are the original folding tow hook that has proven it's self 1000's of times over the years.
• Fully machined tapered design with chamfered edges to eliminate cutting tow straps
• Flawless brushed surface finish
• 300 series stainless steel tow loop
• Red "TOW" Graphic
• Go Pro Camera mount compatable (Mount sold Separately)

Rennline Folding Tow Hook.



Fits the front of 964/993/996/997/Boxster/Cayman/944T/968 and the rear of 964/993/964/993/996/997 and 911's with factory screw in reciever
Note: The threads on this screw are the special factory Porsche thread.

Rennline's stainless steel folding race hooks install in minutes on any Porsche with factory screw type removable tow hooks. Unlike the aluminum units on the market that are usually advertised as "for decorative purposes only", Rennline's stainless steel tow hooks are precision machined and will stand up to the extreme abuse seen in any race environment. These pulls have a 2" opening as required by most organized race events and screw directly into the factory bumper pull location. Each hook comes with a rubber bumper to be applied on the back side to insure your bumper cover will never get scratched from hook contact. Also included is one red tow sticker. Keep the corner workers and track officials happy by installing a set of hooks that are both highly visible and highly functional. Why is ours the best:

• Ours is the original folding tow hook that has proven it's self 1000's of times over the years.
• Fully machined and chamfered edges to eliminate cutting tow straps
• Flawless brushed surface finish
• Through bolt design - Some hooks on the market have bolts on each side resulting in very little thread contact causing hook failure.
• 300 series stainless steel
• Two Red Tow Stickers included
• Replaceable tow stickers available in several colors.

Note: Pictures may not show actual product.

Rennline Folding Tow Hook. SCREW TYPE.



Fits:
Porsche 981 Cayman GT4

Rennline's stainless steel folding race hooks install in minutes on any Porsche with factory screw type removable tow hooks. Unlike the aluminum units on the market that are usually advertised as "for decorative purposes only", Rennline's stainless steel tow hooks are precision machined and will stand up to the extreme abuse seen in any race environment. These pulls have a 2" opening as required by most organized race events and screw directly into the factory bumper pull location. Each hook comes with a rubber bumper to be applied on the back side to insure your bumper cover will never get scratched from hook contact. Also included is one red tow sticker. Keep the corner workers and track officials happy by installing a set of hooks that are both highly visible and highly functional. Why is ours the best:

• Ours is the original folding tow hook that has proven it's self 1000's of times over the years.
• Fully machined and chamfered edges to eliminate cutting tow straps
• Flawless brushed surface finish
• Through bolt design - Some hooks on the market have bolts on each side resulting in very little thread contact causing hook failure.
• 300 series stainless steel
• Two Red Tow Stickers included
• Replaceable tow stickers available in several colors.
• Go Pro Camera mount compatible (Mount sold Separately)

Note: Pictures may not show actual product.

Rennline Folding Tow Hook. SCREW TYPE.
FRONT

Fits:
Porsche 981 Boxster
Porsche 981 Cayman
Porsche 991
Porsche Panamera

Rennline's stainless steel folding race hooks install in minutes on any Porsche with factory screw type removable tow hooks. Unlike the aluminum units on the market that are usually advertised as "for decorative purposes only", Rennline's stainless steel tow hooks are precision machined and will stand up to the extreme abuse seen in any race environment. These pulls have a 2" opening as required by most organized race events and screw directly into the factory bumper pull location. Also included is one red tow sticker. Keep the corner workers and track officials happy by installing a set of hooks that are both highly visible and highly functional. Why is ours the best:

• Ours is the original folding tow hook that has proven it's self 1000's of times over the years.
• Fully machined and chamfered edges to eliminate cutting tow straps
• Flawless brushed surface finish
• Through bolt design - Some hooks on the market have bolts on each side resulting in very little thread contact causing hook failure.
• 300 series stainless steel
• Two Red Tow Stickers included
• Replaceable tow stickers available in several colors.
• Go Pro Camera mount compatable (Mount sold Separately)

Note: Pictures may not show actual product.

Rennline Rear Subframe Stabilizer with Tie Downs (Front & Rear).



Fits:
Porsche 981 Boxster
Porsche 981 Cayman

Subframe Stabilizer:
Most Boxster and Cayman owners who take their cars to the track, have equipped their Porsches with tires much wider and stickier than stock, which allows higher g-forces to be achieved in cornering and braking. During that type of hard driving, the 2 piece rear sub frame flexes by the extreme loads being put on them, defeating your car's finely tuned alignment settings, thereby reducing your braking and cornering potential, and increasing tire wear. With this install, your Porsche will handle and brake with greater precision, predictability, and feedback to the driver. Comes with integrated rear tie down brackets and hardware for a 10 minute installation.

Front Tie Downs:
Securing a 981 to a trailer is next to impossible without the use of wheel straps that are just about guaranteed to destroy your wheels in time. Save those expensive wheels with a set of inexpensive tie down hooks from Rennline. These hooks have been specifically engineered to bolt to the front of your car without any modification or removal of any factory torqued bolts. Additionally, Rennline has incorporated a much needed jack pad into the front tie downs that will allow you to easily lift the front of your car without the worry of damaging your rocker panel or plastic under trays. Hooks are constructed of steel and powder coated red.

Rear Tie Downs:
These hooks have been specifically engineered to bolt to the rear of your 981 and come with any necessary hardware and installation instructions. Hooks are constructed of steel and powder coated red. Each kit comes with (2) rear hooks.

Note: Pictures may not show actual product.

Rennline Rear Subframe Stabilizer with Tie Downs (Front & Rear).



Fits:
Porsche 986 Boxster
Porsche 987 Boxster
Porsche 987 Cayman

Subframe Stabilizer:
Most Boxster and Cayman owners who take their cars to the track, have equipped their Porsches with tires much wider and stickier than stock, which allows higher g-forces to be achieved in cornering and braking. During that type of hard driving, the 2 piece rear sub frame flexes by the extreme loads being put on them, defeating your car's finely tuned alignment settings, thereby reducing your braking and cornering potential, and increasing tire wear. With this install, your Porsche will handle and brake with greater precision, predictability, and feedback to the driver. Comes with integrated rear tie down brackets and hardware for a 10 minute installation.

Front Tie Downs:
Securing a 986/987 to a trailer is next to impossible without the use of wheel straps that are just about guaranteed to destroy your wheels in time. Save those expensive wheels with a set of inexpensive tie down hooks from Rennline. These hooks have been specifically engineered to bolt to the front of your car without any modification or removal of any factory torqued bolts. Additionally, Rennline has incorporated a much needed jack pad into the front tie downs that will allow you to easily lift the front of your car without the worry of damaging your rocker panel or plastic under trays. Hooks are constructed of steel and powder coated red.

Rear Tie Downs
These hooks have been specifically engineered to bolt to the rear of your 986/987 and come with any necessary hardware and installation instructions. Hooks are constructed of steel and powder coated red. Each kit comes with (2) rear hooks.

Note: Pictures may not show actual product.