Manifold / Headers

A Voucher for £100 available when you buy this product. For more information CLICK HERE

DesignTek Exhaust manifold / header with catalyst bypass.
Price is for PAIR.



Fits:
Porsche 987.2 Boxster 2.9L / 3.4L 2009-12
Porsche 987C.2 Cayman 2.9L / 3.4L 2009-12

NOTE: Sports catalytic converters and bypass pipes do not have type approval and are not legally permitted for use on vehicles manufactured after 1st March 2001 in the United Kingdom. They are not MOT compliant and must not be used on public roads. These components are intended for race and track use only. If you are located outside the UK, please consult your local laws and regulations to ensure compliance.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

3606109876

The product you are viewing cross references to these numbers

Equal length exhaust manifold set, Race. 
Sold as a pair - left and right

 **Not road legal - Offroad / track use only**

Fits:
Porsche 987.2 Boxster - 2009 to 2012
Porsche 987.2 Boxster S - 2009 to 2012
Porsche 987.2 Boxster Spyder -  2009 to 2012
Porsche 987.2 Cayman - 2009 to 2012
Porsche 987.2 Cayman S - 2009 to 2012
Porsche 987.2 Cayman R - 2009 to 2012

Made from SS304L lightweight stainless steel these exhaust manifolds offer reduced back pressure with higher flow

• Performance gains of 15hp minimum and 20nm
• Improved throttle response
• Improved exhaust note with no drone, resonation or vibration
• Direct fit, remap required
• Heat shielded to reduce radiant heat and speeds up exhaust gas velocity

NOTE: Sports catalytic converters and bypass pipes do not have type approval and are not legally permitted for use on vehicles manufactured after 1st March 2001 in the United Kingdom. They are not MOT compliant and must not be used on public roads. These components are intended for race and track use only. If you are located outside the UK, please consult your local laws and regulations to ensure compliance.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9M87113101RKIT

The product you are viewing cross references to these numbers

9m Equal length exhaust manifold with catalytic converter. 
Sold as a pair - left and right

Fits:
Porsche 981 Boxster - 2012 to 2016
Porsche 981 Boxster S - 2012 to 2016

Porsche 981 Boxster GTS -  2012 to 2016
Porsche 981 Boxster Spyder - 2016
Porsche 981 Cayman - 2013 to 2016
Porsche 981 Cayman S - 2013 to 2016
Porsche 981 Cayman GTS - 2013 to 2016
Porsche 981 Cayman GT4 - 2016

Made from SS304L lightweight stainless steel these exhaust manifolds offer reduced back pressure with higher flow

• Performance gains of 20hp minimum and 20nm
• Improved throttle response
• Improved exhaust note with no drone, resonation or vibration
• Direct fit no remap required but recommended
• No CEL
• Heat shielded to reduce radiant heat and speeds up exhaust gas velocity

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9M81113211

The product you are viewing cross references to these numbers

Equal length exhaust manifold with catalytic converter. 

Fits:
Porsche 987.2 Boxster / Boxster S - 2009 to 2012
Porsche 987.2 Boxster Spyder - 2009 to 2012
Porsche 987.2 Cayman / Cayman S  - 2009 to 2012
Porsche 987.2 Cayman R - 2009 to 2012

987.2 Equal length exhaust manifold with catalytic converter.

• Reduced back pressure with higher flow
• Made from SS304L lightweight stainless steel
• Performance gains of 15hp minimum and 20nm
• Improved throttle response
• Improved exhaust note with no drone, resonation or vibration
• Direct fit no remap required but recommended
• No CEL (Check Engine Light)
• Heatshieded to reduce radiant heat and speeds up exhaust gas velocity

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9M87113101

The product you are viewing cross references to these numbers

Exhaust bolt repair kit for Boxster / 996 / 997 Carrera & Cayman Gen1 1997- 2009 (Not GT3, GT2 or TT engines)



With more and more broken exhaust bolts reported on the water-cooled engines, the headache of repairing a broken bolt is becoming epidemic. Tasks ranging from a simple exhaust system update through an engine removal, are consistently plagued by snapped, rusted, and broken exhaust manifold bolts. Rarely can an accurate removal of the broken bolt be performed with the engine in the car, and even after removal, the task is time consuming and if not done carefully can lead to a damaged head or faulty repair. STOMSKI RACING's answer to these problems is the SR067, a kit that easily, accurately, and flexibly allows you to drill out the broken bolts - with the engine still in the car- saving time and headaches. A CNC milled plate indexes precisely off the broken bolts and/or bolt holes. Using our uniquely designed Thumb Screws, the SR067 plate is locked in place (by threading a Thumb Screw over a broken bolt or by using a supplied bolt threaded through the SR067 Thumb Screw). With the included pilot drills and drill guides, the faulty bolt can be drilled out, producing a perfectly perpendicular and centered hole that if necessary can be chased with an included M8x1.25 tap.

Kit includes : anodized aluminum fixture, drill bits, tap with extension, drill jigs/guides, Thumb Screws, and hardware in a sturdy storage case.

Now also includes our SR065D drill guide.

These titanium components are resistant to rust and corrosion, which can be a common issue with traditional steel studs and nuts. This corrosion resistance ensures that the studs and nuts maintain their integrity, allowing for easy removal and installation when necessary. They are the perfect upgrade for Porsche enthusiasts who demand the ease of access to vehicle's exhaust system. 



• Ultra-high-performance product
• Use of Titanium Ti6Al4V technology

Contains 18 x Studs (38mm), Nuts & Washers

Fits:
Porsche 996 Turbo / GT3 / GT2
Porsche 997 Turbo / GT3 / GT2
Porsche 997.2 ALL
Porsche 991 ALL
Porsche 992 ALL
Porsche 987 2009-12
Porsche 981
Porsche 718 GT4

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

TITANSTUDS18

The product you are viewing cross references to these numbers

Exhaust heat shield


Fits:
Porsche 987 Boxster 2005-08
Porsche 987C Cayman 2005-08

Click 'Zoom in' for large parts diagram.
Diagram ref no 30

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

98710444500

The product you are viewing cross references to these numbers

Exhaust Manifold / header set with cat bypass.



Fits:
Porsche 981 Boxster 2012-16
Porsche 981C Cayman 2014-16

This is a set of manifolds (headers) with catalyst bypass to fit third generation model, known as the 981 (2012-2016) Boxster and Cayman.

After the installation of this product the emission light might come on your dash. To remove it you might need to install the lambda sensor extensions from your existing cat.

This is a high quality, 304 grade stainless steel pair of manifolds with secondary cat bypass (decat). Fitting this part will see a substantial power increase and a little extra noise. Check engine lights may come on once this product is fitted depending on your set-up, typically if this is the only exhaust modification you have made they won't trigger.

NOTE: Sports catalytic converters and bypass pipes do not have type approval and are not legally permitted for use on vehicles manufactured after 1st March 2001 in the United Kingdom. They are not MOT compliant and must not be used on public roads. These components are intended for race and track use only. If you are located outside the UK, please consult your local laws and regulations to ensure compliance.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

3606109814

The product you are viewing cross references to these numbers

Exhaust Manifold / Header



Fits:
Porsche 987 Boxster 2005- 08/2008
Porsche 987C Cayman 2006- 08/2008

DesignTek sports headers and 200 cell high flow cats for throaty sports car sound, but not too loud for every day driving, manufactured from extra heavy duty stainless steel, which eliminates the splitting, cracking and annoying resonance.

Coating: 40g
Cells: 200cpsi

Please note: These sport cats will make your car sound louder than with stock cats. If you have ,or intend to install sport silencers, you may find the car is a bit loo loud. We recommend to use one sport exhaust component if you are concerned about decibel levels.

NOTE: Sports catalytic converters and bypass pipes do not have type approval and are not legally permitted for use on vehicles manufactured after 1st March 2001 in the United Kingdom. They are not MOT compliant and must not be used on public roads. These components are intended for race and track use only. If you are located outside the UK, please consult your local laws and regulations to ensure compliance.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

3606109874

The product you are viewing cross references to these numbers

Exhaust Manifold / Header with 200 Cell sport CAT

Fits:
Porsche 987 Boxster 2005- 08/2008
Porsche 987C Cayman 2006- 08/2008

DesignTek sports headers and 200 cell  high flow cats for throaty sports car sound, but not too loud for every day driving, manufactured from extra heavy duty stainless steel, which eliminates the splitting, cracking and annoying resonance.

Coating: 40g
Cells: 200cpsi
Manufactured in United Kingdom

Please be aware, these sport cats will make your car sound louder than with stock cats. If you have ,or intend to install sport silencers, you may find the car is a bit loo loud. We recommend to use one sport exhaust component if you are concerned about decibel levels.

NOTE: Sports catalytic converters and bypass pipes do not have type approval and are not legally permitted for use on vehicles manufactured after 1st March 2001 in the United Kingdom. They are not MOT compliant and must not be used on public roads. These components are intended for race and track use only. If you are located outside the UK, please consult your local laws and regulations to ensure compliance.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

3606109872

The product you are viewing cross references to these numbers

Exhaust Manifold / Header with Cat Bypass

Fits:
Porsche 987 Boxster 2005- 08/2008
Porsche 987C Cayman 2006- 08/2008

Please note: This is a set of headers with catalyst bypass. After the installation of this product the emission light might come on your dash. To remove it you might need to install the lambda sensor extensions.

NOTE: Sports catalytic converters and bypass pipes do not have type approval and are not legally permitted for use on vehicles manufactured after 1st March 2001 in the United Kingdom. They are not MOT compliant and must not be used on public roads. These components are intended for race and track use only. If you are located outside the UK, please consult your local laws and regulations to ensure compliance.

Please note:
On the video below customer has fitted our headers and sport silencer with secondary cat bypasses. The car on the video has no cats at all!



Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

3606109875

The product you are viewing cross references to these numbers

Titanium exhaust manifold bolt M8x27. 
Set of 12  (OE Ref: 99907358901) 



Titanium is a highly corrosion-resistant material, which is particularly important in exhaust systems due to the exposure to extreme heat and moisture. The corrosion resistance of titanium bolts ensures longevity and reduces the risk of premature failure, ultimately saving the owner from costly repairs.

Fits:
Porsche 986 Boxster 1997-2004
Porsche 987 Boxster 2005-2008
Porsche 987C Cayman 2006-2008
Porsche 996 Carrera 1998-2004
Porsche 997.1 Carrera 2005-2008
Porsche 718 (982) Boxster 2017-2021
Porsche 718 (982C) Cayman 2017-2021

Click 'Zoom in' for large parts diagram.
Diagram ref no 3

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

TITANTORXLONG12

The product you are viewing cross references to these numbers

Exhaust manifold bolts M8x21. Made out of Titanium
Set of 18 pcs



Titanium is a highly corrosion-resistant material, which is particularly important in exhaust systems due to the exposure to extreme heat and moisture. The corrosion resistance of titanium bolts ensures longevity and reduces the risk of premature failure, ultimately saving the owner from costly repairs.

Fits:
Porsche 987.2 Boxster 2009-2012
Porsche 987C.2 Cayman 2009-2012
Porsche 997.2 Carrera 2009-2012
Porsche 981 Boxster 2012-2016
Porsche 981C Cayman 2014-2016
Porsche 991 MKI 2012-2016
Porsche Cayman GT4 2016

Click 'Zoom in' for large parts diagram.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

TITANTORXSHORT18

The product you are viewing cross references to these numbers