Gearshift Control Parts

Push Rod Gear Linkage


Fits:
Porsche 986 Boxster 1997-04
Porsche 987 Boxster 2005-08
Porsche 987C Cayman 2005-08

Click 'Zoom in' for large parts diagram.
Diagram ref no 8

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

98642604301

The product you are viewing cross references to these numbers

Rennline ExactShift coupler.



Fits:
• Fits all 996/997/986/987 models
• Height adjustable shift lever
• Machined from 6061 aluminum and mild carbon steel
• High quality roller bearings replace OEM plastic shift bushings
• No plastic components
• Accepts OEM shift knob
• Works with all Rennline billet aluminum shift knobs
• Re-uses existing shifter housing




Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

TR08

The product you are viewing cross references to these numbers

Rennline Shifter Riser 4"

Fits:
Porsche 986 Boxster
Porsche 987 Boxster
Porsche 987 Cayman
Porsche 996
Porsche 997

Rennline's Shift Tower Riser solves the problem of the shifter being too far away from the steering wheel for fast precision shifts demanded by hard track driving. By installing this shift riser you can enjoy quicker and easier shifting, with a feel similar to the factory cup cars. This unit is machined from aircraft grade aluminum and available in anodize or powder coat black finishes. All hardware included and installs in minutes with no drilling required. Unlike other units on the market, emergency brake removal NOT REQUIRED.

Note: This unit is not intended for use with the plastic center console installed.

Note: Pictures may not show actual product.

Rennline Shifter Riser 7"

Fits:
Porsche 986 Boxster
Porsche 987 Boxster
Porsche 987 Cayman

Rennline's Shift Tower Riser solves the problem of the shifter being too far away from the steering wheel for fast precision shifts demanded by hard track driving. By installing this shift riser you can enjoy quicker and easier shifting, with a feel similar to the factory cup cars. This unit is machined from aircraft grade aluminum and available in anodize or powder coat black finishes. All hardware included and installs in minutes with no drilling required. Unlike other units on the market, emergency brake removal NOT REQUIRED.

Note: This unit is not intended for use with the plastic center console installed.

Note: Pictures may not show actual product.

Shift Cable Installation Tool - Manual Transmission



Holds shift cable in place to make installation and adjustment easier on Porsche Boxster 2005-2008, Cayman 2006-2008, Carrera 2005-2008 (997).

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

00072196191

The product you are viewing cross references to these numbers

Replacement for OE Part 99642414700
Gear Linkage Cable End. Manual Cars



Like most European cars, the shifting is very sloppy and needs to be stiffen up. New replacement short shift linkage that fits with the factory or aftermarket shifters.

This linkage is 1 solid unit for rigidity using a plastic material insert which gives the shifter a stiff and accurate shift. The shift linkage fits over the stock cable housing giving you ability to adjust its tension for a perfect driving experience. The shift linkage is then tighten down with an easy access stainless steel locking bolt.

Fits:
Porsche 996 1998-05
Porsche 997 2005>>
Porsche 987C Cayman
Porsche 986 Boxster
Potsche 987 Boxster

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99642414799

The product you are viewing cross references to these numbers

DesignTek short Throw Manual Shifters for Porsches with 6-Speed gearboxes are CAD-designed and engineered direct bolt-in replacement shifters. These shifters feature counter-balanced bottom ends for more precise shifts. Extremely tight tolerances make these shifters the smoothest, most accurate shifters available. Only the finest components are assembled into this shifter. The Precision Sport Shifter for the Porsche includes a stainless steel stick, CNC machined aluminum carrier assembly and bushings, clips and the shifter accepts your stock factory knob. The unit comes assembled tilted to the left. If you prefer the tilt the other way you need to disassemble it and switch the stalk around.

Fits:
Porsche 996 1998-05 all models
Porsche 997 2005-07 all models
Porsche 986 Boxster 1997-05 all 6 speed models
Porsche 987 Boxster
Porsche 987C Cayman

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

3601009961

The product you are viewing cross references to these numbers

Short shifter unit. Porsche 996 / 986 / 987 / 997 / 987C
(Factory Option code: IXCZ Short level kit)

Fits:
Porsche 996 1998-05 all models
Porsche 997 2005-12 all models
Porsche 986 Boxster all 6 speed models
Porsche 987 Boxster 2006-12
Porsche 987C Cayman 2006-12

Original Porsche short-throw mechanism provides a faster, more accurate gearshift action and a more dynamic sportscar experience. Compatible with all gear lever options from Porsche Tequipment.
Note: gearshift action may be slightly restricted when vehicle is started from cold.

Click 'Zoom in' for large parts diagram.
Diagram ref no 1

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99742498300

The product you are viewing cross references to these numbers

Short Throw Shifter.
Comes with 2mm standard spring which mimics the GT4 shifter.



Fits:
Porsche 981 Boxster / Boxster S 2012>>
Porsche 981C Cayman / Cayman S / Cayman GTS & GT4 2012>>
Porsche 991 All Carrera Models / All Targa Models / 911R 2012>>
Porsche 718 Boxster / Boxster S 2017>>
Porsche 718C Cayman / Cayman S 2017>>

• 35% Reduction,
• Billet Aluminum Housing,
• Precision Ball Bearings on all Axis,
• Rifle Bolt-Like Shifting,
• Rigid Design
• Colour: BLACK
• Limited Lifetime Warranty

Please note when ordering: Each shifter is custom, hand built. Please allow up to 10-14 days for processing.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

3601009918

The product you are viewing cross references to these numbers

Short Throw Shifter.
Comes with 1.5mm softer spring



Fits:
Porsche 981 Boxster / Boxster S 2012>>
Porsche 981C Cayman / Cayman S / Cayman GTS & GT4 2012>>
Porsche 991 All Carrera Models / All Targa Models / 911R 2012>>
Porsche 718 Boxster / Boxster S 2017>>
Porsche 718C Cayman / Cayman S 2017>>

• 35% Reduction,
• Billet Aluminum Housing,
• Precision Ball Bearings on all Axis,
• Rifle Bolt-Like Shifting,
• Rigid Design
• Colour: BLACK
• Limited Lifetime Warranty

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

3601009918

The product you are viewing cross references to these numbers

Solid gearshift cable end set - 5 Speed



Fits:
Porsche 987.1 Boxster / Cayman - 2005 to 2008
5 Speed Manual cars only

The OEM shifter cables use large rubber ends to isolate the shifter from the transmission. These soak up your effort and numb the feedback and directness required for optimal shifting performance. The resultant sloppy gear engagement leaves the driver questioning if the desired gear is fully engaged. 

This also leads to over-extension and stressing of the cables as the shift lever is pulled beyond the limit. 
From a safety and reliability standpoint, the plastic snap-on cups also wear out over time and split causing the cable to pop off the transmission.

Our solution replaces the rubber and plastic internals of the OEM shifter cable ends with tightly toleranced aluminum and Delrin components, reliably held on with steel snap-rings.  

Also, the included cotter pins provide a safety redundancy to ensure the cables stay securely affixed to the transmission.  The result is excellent shifting feel, precision, and control with no added noise, vibration or harshness (NVH) and no chance for the cable ends to pop off.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

98742404111

The product you are viewing cross references to these numbers

Solid gearshift cable end set - 6 Speed



Fits:
Porsche 987.1 Boxster S - 2005 to 2008
Porsche 987.1 Cayman S - 2006 to 2008
Porsche 987.2 Boxster / Boxster S - 2009 to 2012
Porsche 987.2 Cayman / Cayman S - 2009 to 2013
6 Speed Manual cars only

The OEM shifter cables use large rubber ends to isolate the shifter from the transmission. These soak up your effort and numb the feedback and directness required for optimal shifting performance. The resultant sloppy gear engagement leaves the driver questioning if the desired gear is fully engaged. 

This also leads to over-extension and stressing of the cables as the shift lever is pulled beyond the limit. 
From a safety and reliability standpoint, the plastic snap-on cups also wear out over time and split causing the cable to pop off the transmission.

Our solution replaces the rubber and plastic internals of the OEM shifter cable ends with tightly toleranced aluminum and Delrin components, reliably held on with steel snap-rings.  

Also, the included cotter pins provide a safety redundancy to ensure the cables stay securely affixed to the transmission.  The result is excellent shifting feel, precision, and control with no added noise, vibration or harshness (NVH) and no chance for the cable ends to pop off.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

98742404212

The product you are viewing cross references to these numbers

Solid gearshift cable end set. 



Fits:
Porsche 991 - 2012 to 2018
Porsche 992 - 2019 Onwards
Porsche 981 Boxster - 2012 to 2016
Porsche 981 Cayman - 2013 to 2016
Porsche 718 Boxster - 2017 Onwards
Porsche 718 Cayman - 2017 Onwards
Manual cars only

The OEM shifter cables use large rubber ends to isolate the shifter from the transmission. These soak up your effort and numb the feedback and directness required for optimal shifting performance. The resultant sloppy gear engagement leaves the driver questioning if the desired gear is fully engaged. 

This also leads to over-extension and stressing of the cables as the shift lever is pulled beyond the limit. 
From a safety and reliability standpoint, the plastic snap-on cups also wear out over time and split causing the cable to pop off the transmission.

Our solution replaces the rubber and plastic internals of the OEM shifter cable ends with tightly toleranced aluminum and Delrin components, reliably held on with steel snap-rings.  

Also, the included cotter pins provide a safety redundancy to ensure the cables stay securely affixed to the transmission.  The result is excellent shifting feel, precision, and control with no added noise, vibration or harshness (NVH) and no chance for the cable ends to pop off.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99142414700

The product you are viewing cross references to these numbers

Solid gearshift cable gearbox end set. 



Fits:
Porsche 987.2 Boxster / Boxster S - 2009 to 2012
Porsche 987.2 Cayman / Cayman S - 2009 to 2012
Porsche 997 Carrera / Carrera 4 / Carrera 4S - 2005 to 2012
Porsche 997 turbo -  2007 to 2015
Porsche 997 GT2 - 2011 to 2012

Porsche 997.2 GT3 - 2010 to 2012
Manual cars only

The OEM shifter cables use large rubber ends to isolate the shifter from the transmission. These soak up your effort and numb the feedback and directness required for optimal shifting performance. The resultant sloppy gear engagement leaves the driver questioning if the desired gear is fully engaged. 

This also leads to over-extension and stressing of the cables as the shift lever is pulled beyond the limit. 
From a safety and reliability standpoint, the plastic snap-on cups also wear out over time and split causing the cable to pop off the transmission.

Our solution replaces the rubber and plastic internals of the OEM shifter cable ends with tightly toleranced aluminum and Delrin components, reliably held on with steel snap-rings.  

Also, the included cotter pins provide a safety redundancy to ensure the cables stay securely affixed to the transmission.  The result is excellent shifting feel, precision, and control with no added noise, vibration or harshness (NVH) and no chance for the cable ends to pop off.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99742404101

The product you are viewing cross references to these numbers

Transmission shift cable, 5 Speed manual transmission.



Fits:
For cars with 5-speed manual transmission
Porsche 987 Boxster Upto >>2006
Porsche 987C Cayman Upto >>2006

Click 'Zoom in' for large parts diagram.
Diagram ref no 3

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

98742404101

The product you are viewing cross references to these numbers

Transmission shift cable, 5 Speed manual transmission.



Fits:
For cars with 5-speed manual transmission
Porsche 987 Boxster 2007 >> Onwards
Porsche 987C Cayman 2007 >> Onwards

Click 'Zoom in' for large parts diagram.
Diagram ref no 3

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

98742404111

The product you are viewing cross references to these numbers