Gearbox Service Parts

ELF transmission final drive gear oil  TRAXIUM AXLE 7 80W-90 - 1 LTR

TRAXIUM AXLE 7 80W-90 is extreme pressure mineral oil for the lubrication of highly loaded gears (axles, final drives, transfer cases, planetary gearboxes) when an API GL-5 level of performance is required.

TRAXIUM AXLE 7 80W-90 is specially recommended for ZF and MAN hypoid gears, with standard drain intervals

PERFORMANCES AND CUSTOMER BENEFITS:
• Efficient protection of gears against wear and corrosion due to stable extreme-pressure properties
• High compatibility with oil filters due to antifoam properties.

• Efficient stability in operation due to high viscosity index.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

214086

The product you are viewing cross references to these numbers

Gear Oil for direct shift gearbox (DCTF-1)



OE-Comparison 00004320730 | 00004330514 | 00004320729 | 00004330513 | 99991708000

Specification: BMW 7-Gang Drivelogic, BMW Drivelogic 7-speed, DCTF-1, DCTF-1+, Dia Queen SSTF-I, Ford WSS-M2C936-A, MB 236.21, MB 236.24, Mitsubishi XTC-SST, MTF-LT-5, Pentosin FFL-3, Pentosin FFL-4, Porsche DCT, PSA DCS 6-speed, Renault EDC 6-speed, VW TL 52 182

Product Information
• High protection against freezing, corrosion, and cavitation
• Excellent lubricating properties, high ageing resistance, and high wetting and adhesion properties
• Prevention of deposits and foam formation
• Compliance with the requirements of vehicle manufacturers

Vehicle Repairs. We've Got What it Takes.
Only the right oil can guarantee continuous gear lubrication. Gear oils from febi are therefore precisely matched to the special requirements of vehicle manufacturers.

In addition to their favourable friction behaviour, febi gear oils offer optimal resistance to low temperatures and guarantee the best possible corrosion protection.

Quality by Conviction
Oils from febi are not universal products, but rather are tailored to the special requirements of vehicle manufacturers.

The gear oils offered consist of the most efficient base oils and modern additives. Thanks to their thermal stability, the oils are ideally resistant to ageing and provide maximum wear protection in all operating conditions.

Optimal Packaging Design
Gear oils from febi are an excellent choice. This is demonstrated not only by the quality - in many cases, febi transmission fluid even exceeds the requirements of vehicle manufacturers - but also by the user-friendly packaging design.

The clear labelling of the products through the use of color-coding makes their identification simple. Special recessed grips on the recyclable, leak-proof PE plastic bottles make filling noticeably easier. Viewing strips also provide information about the current filling level at all times.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

00004330513

The product you are viewing cross references to these numbers

Gear Oil for direct shift gearbox (DCTF-1). 50Ltr barrel 



OE-Comparison 00004320730 | 00004330514 | 00004320729 | 00004330513 | 99991708000

Specification: BMW 7-Gang Drivelogic, BMW Drivelogic 7-speed, DCTF-1, DCTF-1+, Dia Queen SSTF-I, Ford WSS-M2C936-A, MB 236.21, MB 236.24, Mitsubishi XTC-SST, MTF-LT-5, Pentosin FFL-3, Pentosin FFL-4, Porsche DCT, PSA DCS 6-speed, Renault EDC 6-speed, VW TL 52 182

Product Information
• High protection against freezing, corrosion, and cavitation
• Excellent lubricating properties, high ageing resistance, and high wetting and adhesion properties
• Prevention of deposits and foam formation
• Compliance with the requirements of vehicle manufacturers

Vehicle Repairs. We've Got What it Takes.
Only the right oil can guarantee continuous gear lubrication. Gear oils from febi are therefore precisely matched to the special requirements of vehicle manufacturers.

In addition to their favourable friction behaviour, febi gear oils offer optimal resistance to low temperatures and guarantee the best possible corrosion protection.

Quality by Conviction
Oils from febi are not universal products, but rather are tailored to the special requirements of vehicle manufacturers.

The gear oils offered consist of the most efficient base oils and modern additives. Thanks to their thermal stability, the oils are ideally resistant to ageing and provide maximum wear protection in all operating conditions.

Optimal Packaging Design
Gear oils from febi are an excellent choice. This is demonstrated not only by the quality - in many cases, febi transmission fluid even exceeds the requirements of vehicle manufacturers - but also by the user-friendly packaging design.

The clear labelling of the products through the use of color-coding makes their identification simple. Special recessed grips on the recyclable, leak-proof PE plastic bottles make filling noticeably easier. Viewing strips also provide information about the current filling level at all times.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

00004330513

The product you are viewing cross references to these numbers

Gearbox Transmission oil SAE 75W-90 1Litre



Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

00004330540

The product you are viewing cross references to these numbers

Millers Oil Fully synthetic NANODRIVE CRX 75w90 NT+ Transmission Oil



DESCRIPTION:

A competition fully synthetic transmission oil formulated using a unique combination of improved chemistry and lower friction NANODRIVE additives to massively reduce friction vs a standard oil. The Millers Oils range of competition gear oils is fully synthetic and incorporates second generation NANODRIVE low friction technology to achieve winning results in both professional and nonprofessional racing.

APPLICATION:

Designed for the lubrication of competition gearboxes. Manual transmissions, synchromesh, non-synchromesh, sequential gearboxes, transfer gearboxes, transaxles and hypoid differentials without limited slip which require API GL4 or GL5 performance. Recommended for modern transmissions where fully synthetic oil is specified, especially for high performance road and track day applications. Hewland, Xtrac, Glebe Transmissions, ZF, Tran X, Elite Transmissions, Samsonas.

Note: Not suitable for plate type limited slip differentials, instead use CRX LS 75w90 NT+.

USER BENEFITS:

• Laboratory tests and results show up to a further 15% reduction in friction and up to a further 17% reduction in wear over the previous award winning NT range
• Exceptional cold flow properties for easier gear changes
• Fast lubrication flow to component extremes on start up
• Very good oxidation resistance and superior thermal stability
• Low friction/ low drag formulation to help reduce operating temperatures
• High film strength for maximum component protection
• Significantly reduces friction, temperature, wear and minimises power loss
• Triple ester formulation works synergistically for optimised film strength and anti-wear protection
• Second generation NANODRIVE low friction technology maximises torque and power

PERFORMANCE PROFILE:

• API GL4
• API GL5
• API MT-1
• MIL-PRF-2105E
• ZF TE-ML-02B
• ZF TE-ML-05B
• ZF TE-ML-07A
• ZF TE-ML-12B
• ZF TE-ML-16F
• ZF TE-ML-17B
• ZF TE-ML-19C
• ZF TE-ML-21B

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

7966

The product you are viewing cross references to these numbers

Millers Oil Fully synthetic TRX Synth 75w90 Transmission Oil



DESCRIPTION:

A fully synthetic transmission oil to provide maximum protection and fuel economy.

APPLICATION:

For use in car and light van manual gearboxes and axles where the ultimate performance gear oil is required.

USER BENEFITS:

• Will allow fuel economy of the vehicle to be maximised
• Provides outstanding protection against wear and corrosion
• Improves the quality of the gear change
• Resists the effects of high temperatures and heavy-duty use
• Allows extended service intervals to be used

PERFORMANCE PROFILE:

• API GL-4
• API GL-5

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

8376

The product you are viewing cross references to these numbers

MOTUL GEAR 300 75W-90 transmission oil - 1ltr
For gearboxes WITHOUT Limited Slip Differentials (LSD)

Specifically designed for racing vehicle gearboxes, including those used in track, rally, and raid events. Ideal for all mechanical transmissions, whether synchronized or non-synchronized gearboxes, gearbox/differential units, transfer gearboxes, and hypoid differentials WITHOUT limited slip differentials.
Performs exceptionally well under shock loads, heavy loads at low RPM, or moderate loads at high RPM.

PERFORMANCE:

• Standards: API GL4 & GL5 / MIL-L-2105D
• 100% synthetic extreme pressure lubricant provides superior anti-wear protection, enhanced high-temperature resistance, and extended service life.
• Zero shear loss: Maintains an unshearable oil film even under extreme conditions.
• Retains 90 grade viscosity after the KRL 20-hour shear test, meeting the SAE J306 Standard, updated in July 1998.
• Exceptional lubricating properties reduce friction and wear.
• 90 grade viscosity at high temperatures ensures excellent oil film resistance and reduces transmission noise.
• Remains fluid at low temperatures for smoother gear shifts when the gearbox is cold.
• Reduces effort required for shifting gears.
• Compatible with all types of seals and yellow metals used in gearbox design.
• Offers anti-corrosion and anti-foam properties.

RECOMMENDATIONS: Change the oil according to the manufacturer's guidelines, and adjust based on your specific usage conditions.

MOTUL GEAR 300 LS 75W-90 transmission oil - 1ltr
For gearboxes WITH Limited Slip Differentials (LSD)

Specifically designed for racing vehicle gearboxes, including those used in track, rally, and raid events. Ideal for all mechanical transmissions, whether synchronized or non-synchronized gearboxes, gearbox/differential units, transfer gearboxes, and all hypoid differentials WITH limited slip differentials.
Performs exceptionally well under shock loads, heavy loads at low RPM, or moderate loads at high RPM.

PERFORMANCE:

• Standards: API GL5
• 100% synthetic extreme pressure lubricant provides superior anti-wear protection, enhanced high-temperature resistance, and extended service life.
• Zero shear loss: Maintains an unshearable oil film even under extreme conditions.
• Retains 90 grade viscosity after the KRL 20-hour shear test, meeting the SAE J306 Standard, updated in July 1998.
• Exceptional lubricating properties reduce friction and wear.
• 90 grade viscosity at high temperatures ensures excellent oil film resistance and reduces transmission noise.
• Remains fluid at low temperatures for smoother gear shifts when the gearbox is cold.
• Reduces effort required for shifting gears.
• Compatible with all types of seals and yellow metals used in gearbox design.
• Offers anti-corrosion and anti-foam properties.

RECOMMENDATIONS: Change the oil according to the manufacturer's guidelines, and adjust based on your specific usage conditions.

MOTUL GEAR COMPETITION 75W-140 - 1ltr
For gearboxes WITH  AND without Limited Slip Differentials (LSD)

Specifically designed for racing vehicle gearboxes, including those used in track, rally, and raid events. Ideal for all mechanical transmissions, whether synchronized or non-synchronized gearboxes, gearbox/differential units, transfer gearboxes, and all hypoid differentials WITH  AND WITHOUT limited slip differentials.
Performs exceptionally well under shock loads, heavy loads at low RPM, or moderate loads at high RPM.

PERFORMANCE:

• Standards: API GL5
• 100% synthetic extreme pressure lubricant provides superior anti-wear protection, enhanced high-temperature resistance, and extended service life.
• Zero shear loss: Maintains an unshearable oil film even under extreme conditions.
• Retains 14 grade viscosity after the KRL 20-hour shear test, meeting the SAE J306 Standard, updated in July 1998.
• Exceptional lubricating properties reduce friction and wear.
• 90 grade viscosity at high temperatures ensures excellent oil film resistance and reduces transmission noise.
• Remains fluid at low temperatures for smoother gear shifts when the gearbox is cold.
• Reduces effort required for shifting gears.
• Compatible with all types of seals and yellow metals used in gearbox design.
• Offers anti-corrosion and anti-foam properties.

RECOMMENDATIONS: Change the oil according to the manufacturer's guidelines, and adjust based on your specific usage conditions.