Subframe Drop and Suspension Lift Kits

Air suspension mounting bracket upgrade aluminium. 
One set needed per car

Fits:
Porsche 955 Cayenne - 2003 to 2006
Porsche 957 Cayenne - 2007 to 2010

As they age, the plastic OEM air suspension leveling components get brittle and breakage is prone - even without a lift. These 6061 aluminum mounting brackets replace the OEM brackets so you don't have to worry about them breaking and leaving your suspension in max high or low settings, potentially leaving you stranded. Even worse, the OEM plastic brackets aren't available for purchase separately - you have to buy the entire sensor assembly.

Brackets are CNC machined from 6061 aluminum, then media blasted and anodized for a lifetime finish, backed up by a lifetime warranty.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

EWORFUBKT001

The product you are viewing cross references to these numbers

Centering sleeves subframe. 

Kit for front and rear subframes

Fits:

Porsche 955 Cayenne - 2003 to 2006
Porsche 957 Cayenne - 2007 to 2010
Porsche 958 Cayenne - 2010 to 2018

Subframe centering sleeves for the 955/957/958 Cayenne

These sleeves are designed to prevent your subframe from shifting and throwing off alignment while off-roading. When the Volkswagen Audi Group designed the Gen1 chassis, they made the subframe mounting holes larger than the bolt diameter. This is to allow for shifting of the subframe, to adjust caster and camber, but hard driving can introduce unwanted shifts.  

Eurowise centering sleeves keep your subframe static by taking up the negative space around the bolt. 

Please Note:
A subframe drop is not a replacement for centering sleeves. They are solutions to separate problems. 
Subframe centering sleeves can be used in conjunction with Subframe Drop Kits.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

EWORG1001S

The product you are viewing cross references to these numbers

Front adjustable upper control arm set tubular.
Set of 2 upper control arms  (left and right)

Fits:

Porsche 955 Cayenne - 2003 to 2006
Porsche 957 Cayenne - 2007 to 2010

Eurowise Tubular Upper Control Arms for the 1st generation Porsche Cayenne, VW Touareg, and Audi Q7

Lifting your Porsche Cayenne, Volkswagen Touareg, or Audi Q7 more than 2.5" can result in excessive positive camber that exceeds the factory adjustment range. Eurowise Tubular Upper Control Arms are engineered to resolve this issue while enhancing flexibility and reinforcing strength.

Key Features:
Enhanced Ball Joints: Provide a wider adjustment range than OEM parts, increasing suspension articulation for improved performance.
Silicone Dust Boots: Offer superior durability compared to spherical bearings and require minimal maintenance.
Improved Handling: Inner joints are designed to minimize deflection under load, delivering better stability and performance both on-road and off-road.
Durable Construction: Built from DOM tubing, MIG welded, and finished with a satin black powder coat for long-lasting strength and reliability.

After years of extensive testing in both on-road and off-road conditions, these control arms have demonstrated exceptional durability, with zero failures reported. They are significantly stronger than OEM arms while offering precise camber adjustment to bring your alignment back into spec.

Fitment:
2002–2010 Volkswagen Touareg
2002–2010 Porsche Cayenne
2007–2015 Audi Q7

Upgrade your suspension for improved durability, enhanced alignment capability, and superior handling in any environment.

These are designed to position the air suspension level sensor arm in its original OEM location; however, slight adjustments or recalibration of the sensor arm may be necessary.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

EWORG1ADJUPPER

The product you are viewing cross references to these numbers

Front strut fork reinforcement plate kit. 
Kit for both front suspension strut forks

Fits:
Porsche 955 Cayenne - 2003 to 2006
Porsche 957 Cayenne - 2007 to 2010
Porsche 958 Cayenne - 2011 to 2017 (Air suspension only)

On the 955/957 Cayenne the strut forks are a common weak point on the suspension and often the first thing to fail. Porsche and VW recognized this and changed the design on steel spring equipped 958s and T3s, but those without updated forks are at risk of failure, which has the potential to cause axle interference and leave you stranded.

These reinforcement plates come with mounting hardware, are 100% bolt in and add significant strength.

Kit Includes:
Strut Fork Reinforcement Plates x 4
Mounting Bolts/Nuts x 12

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

EWORG100122

The product you are viewing cross references to these numbers

Lift kit spacer set for air suspension 2 inch. 
Set of for Front and Rear suspension

Fits:

Porsche 955 Cayenne - 2003 to 2006
Porsche 957 Cayenne - 2007 to 2010

2” lift kit for 955/957 Porsche Cayenne with Air Suspension.

Bullet proof, bolt-in solution for heavy duty off roading, whether it be in sand dunes or rock crawling in extreme environments. To ensure zero failures, we replace the weak OEM strut brackets with bigger, wider and thicker units. 

Sway bars may be removed for additional articulation, or retained with use of our Eurowise Sway Bar Links. OEM sway bar links will not clear the reinforced brackets.

Lift your vehicle the proper way, maintaining ride quality without running your vehicle in “Offroad” mode.

Professional installation recommended. 
Strut bolts MUST be tightened with the suspension loaded.

Disclaimer:
We recommend always driving in “Auto” mode, both on and off road. Driving in “Offroad” with a lift kit can cause long-term damage to the axle joints due to the extreme angles they are subject to in “Offroad” mode. 

To correct this geometry, installation of our Eurowise Subframe Drop Kit is recommended.

Kit Includes:
Front Strut Brackets with Hardware x 4
Rear Cradle Drop Spacers with Hardware x 4
Level Sensor Links with Hardware x 4

Sway bar links come in steel construction with clear zinc finish 

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

EWOCTQLK14

The product you are viewing cross references to these numbers

Lift kit spacer set for air suspension 3 inch. 
Set of for Front and Rear suspension

Fits:
Porsche 955 Cayenne - 2003 to 2006
Porsche 957 Cayenne - 2007 to 2010

Eurowise 3"+ Lift Kit for 955/957 Porsche Cayenne with Air Suspension.

Bullet proof, bolt-in solution for heavy duty offroading, whether it be in sand dunes or rock crawling in extreme environments. To ensure zero failures, we machine our spacers out of solid block 6061 aluminum and replace the weak OEM strut brackets with bigger, wider, and thicker units. 

To achieve 3” of total lift in auto mode, our 3” Air Suspension Lift Kit includes everything from our 2” Air Suspension Lift Kit plus Front Upper Shock Mount Spacers, Front Sway Bar Links, and our 1.5” Subframe Drop Spacer Kit.

On some vehicles, a 3” lift will introduce more positive camber that can be adjusted out with OEM upper control arms. For such applications, we recommend adding our Eurowise Tubular Upper Control Arms.

Professional installation recommended. 

Strut bolts MUST be tightened with the suspension loaded. This is otherwise a direct bolt-on kit that requires only removal of front and rear strut assemblies, and dropping the rear cradle and front subframe.

Disclaimer: 
We recommend always driving in “Auto” mode, both on and off road. Driving in “Offroad” with a lift kit can cause long-term damage to the axle joints due to the extreme angles they are subject to in “Offroad” mode. Eurowise is not responsible for damage to axles that occurs due to driving in modes higher than “auto.” Noise from rear suspension may occur due to worn rear air strut mounting bushings. If you experience such noise, Eurowise can supply shorter bushings to resolve the issue.

Due to the design of the suspension geometry adding additional lift will cause the air strut plastic bellow to touch the spindle at full droop only. If you see contact on the lift with the suspension fully drooped it is normal. 

Note: 
This lift kit will max out the suspension level sensor’s functional range. The highest setting on the air suspension controller will no longer lift it any higher.

Kit Includes:
Front Strut Brackets with Hardware x 4
Level Sensor Links with Hardware x 4
Front Upper Shock Mount Spacers with Hardware x 6
Front Sway Bar Links x 2
1.5" Subframe Drop Kit with Hardware x 1

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

EWOCTQLK02

The product you are viewing cross references to these numbers

Lift kit spacer set for steel springs 2.5 inch. 
Set of 4 lift spacers (2 x ft / 2 x Rr)

Fits:

Porsche 955 Cayenne - 2003 to 2006
Porsche 957 Cayenne - 2007 to 2010

2.5” lift kit for 955/957 Porsche Cayenne with steel, spring suspension.

Machined from a solid block of 6061 aluminum, these lift kits will never wear out or fail. This is a direct bolt-on lift kit that easily installs over the top of the OEM struts. 

2.5” of lift is the maximum allowable lift without dropping the subframe to compensate for shifts in axle geometry. On some vehicles, especially those with more worn components, CV joints will click unless geometry is corrected with a Eurowise ½” Subframe Drop. 

Professional installation recommended.

For air suspension cars, see: Air Suspension Lift Kit

Kit Includes:
Front Spacers with hardware x 2
Rear Spacers with hardware x 2

Please Note:
The physical thickness of the billet spacers does not reflect the actual lift height. Do not be alarmed if your spacer is not 2.5” thick.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

EWOCTQLK01

The product you are viewing cross references to these numbers

Lift kit spacer set for steel springs 3 inch. 
Set of 4 lift spacers (2 x ft / 2 x Rr)

Fits:

Porsche 955 Cayenne - 2003 to 2006
Porsche 957 Cayenne - 2007 to 2010

Eurowise 3” Lift Kit for 1st Gen Porsche Cayenne with steel spring suspension.

Machined from a solid block of 6061 aluminum, these lift kits will never wear out or fail. This is a direct bolt-on lift kit that installs over the top of the OEM struts. 3” Lift kit includes 3” Lift Spacers and our 1” Subframe Drop, to correct axle geometry and prevent clicking from CV joints.

On some vehicles, a 3” lift will introduce more positive camber than can be adjusted out with OEM upper control arms. Dial it back in by adding our Eurowise Tubular Upper Control Arms.

Professional installation recommended.

For air suspension cars, see: Air Suspension Lift Kit 

Kit Includes:
3 inch Front Spacers with Hardware x 2
3 inch Rear Spacers with Hardware x x
1” inch Subframe Drop Spacers with Hardware x 2

Please Note:
The physical thickness of the billet spacers does not reflect the actual lift height.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

EWOCTQLK03

The product you are viewing cross references to these numbers

Lift kit spacer set for steel springs 4 inch. 
Set of 4 lift spacers (2 x ft / 2 x Rr)
Set of 4 subframe spacers (2 x ft / 2 x Rr)

Fits:

Porsche 955 Cayenne - 2003 to 2006
Porsche 957 Cayenne - 2007 to 2010

Eurowise 4” Lift Kit for 955/957 Porsche Cayenne with steel spring suspension.

Machined from solid 6061 aluminum, these lift kits will never wear out or fail. This is a direct bolt-on lift kit. 4” Lift kit includes 2.5” Lift Spacers, 1” Upper Strut Drop Spacers, 1” Subframe Drop Spacers, and 1” Rear Cradle Drop Spacers

For lifts of 4”, retention of the sway bar requires our Spherical Front Sway Bar Links. A 4" lift will also introduce more positive camber than can be adjusted out with OEM upper control arms. It is highly recommended that anyone with a 4" lift also install our Eurowise Tubular Upper Control Arms or Eurowise Adjustable Tubular Upper Control Arms.

Professional installation is highly recommended. 
Strut bolts MUST be tightened with the suspension loaded, or strut extenders and coil overs can fail.

For air suspension cars, see: Air Suspension Lift Kit

Kit Includes:
2.5 inch Front Spacers with Hardware x 2
2.5 inch Rear Spacers with Hardware x 2
Front Upper Strut Mount Drop Spacers with Hardware x 2
Rear Upper Strut Mount Drop Spacers with Hardware x 2
Rear Cradle Drop Spacers with Hardware x 1
1 inch Subframe Drop Spacers with Hardware x 1
Exhaust Drop Spacers x 1

Please Note:
The physical thickness of the billet spacers does not reflect the actual lift height.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

EWOCTQLK10

The product you are viewing cross references to these numbers

Spherical front sway bar links. 
Set of 2 sway bar links  (left and right)

Fits:

Porsche 955 Cayenne - 2003 to 2006
Porsche 957 Cayenne - 2007 to 2010
Porsche 958 Cayenne - 2010 to 2017

Designed as a more robust alternative to failure-prone stock sway bars and with enough adjustment to use on lifts of 4 inches plus.

Built from steel with 3pc 3140 Chromoly steel Heim joints, self-lubricating nylon/PTFE injection molded inserts and left/right hand threaded joints to make adjustment possible without removal.

These are a bolt-on solution for a Cayenne with or without Active Sway Bars.

Please Note:
For vehicles equipped with Active Sway Bars, reuse your lower hardware.

New upgraded sway bars are moved from the outside to inside mounting position, as pictured below.

Links come zinc coated and clear coated.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

EWOR2010

The product you are viewing cross references to these numbers

Subframe drop kit 1 inch. 
Designed for use with 2.5” to 3” lift kits

Fits:

Porsche 955 Cayenne - 2003 to 2006
Porsche 957 Cayenne - 2007 to 2010
Porsche 958 Cayenne - 2010 to 2018

When lifting your vehicle, the angle and length between your wheel hubs and transmission increases. Our Subframe Drop Kits are designed to correct this change in axle geometry by lowering the subframe.

Our 1” Subframe Drop Kit lowers both front and rear subframes, eliminating lift restrictions due to axle geometry issues. Used in conjunction with our 2.5” lift kit, a 1” Subframe Drop will result in nearly 0 degrees of axle angle.

Please Note: 
If you have Eurowise gas tank skids, you will need to leave the rear mounting point on the subframe attached so the rear portion that bolts to the bracket lines back up easily.

A 1” Subframe Drop will decrease overall lift height by 0.5”. For example, a 2.5” lift kit with a 1” subframe drop will result in 2” of actual lift. A 3” lift kit with a 1” subframe drop will result in 2.5” of actual lift.

Kit Includes:
1” Front Subframe Spacers w/ hardware x 4
1” Rear Subframe Spacers w/ hardware x 4

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

EWORSF1

The product you are viewing cross references to these numbers

Subframe drop kit 1 inch. 
Designed for use with 3.5”  and more lift kits

Fits:
Porsche 955 Cayenne - 2003 to 2006
Porsche 957 Cayenne - 2007 to 2010

Porsche 958 Cayenne - 2010 to 2017

When lifting your vehicle the angle and length between your wheel hubs and transmission increases. Our Subframe Drop Kits are designed to correct this change in axle geometry by lowering the subframe.

Our 1.5” Subframe Drop Kit lowers both front and rear subframes, eliminating lift restrictions due to axle geometry issues. 
This level of Subframe Drop Kit is designed primarily for use in conjunction with our Eurowise, Eurowise+Bilstein, or Eurowise+JRZ coilovers.

Please Note: 
If you have Eurowise gas tank skids, you will need to leave the rear mounting point on the subframe attached so the rear portion that bolts to the bracket lines back up easily.

A 1.5” Subframe Drop will decrease overall lift height. For example, a 2.5” lift kit with a 1” subframe drop will result in 2” of actual lift. A 3” lift kit with a 1” subframe drop will result in 2.5” of actual lift.

Kit Includes:
1.5” Front Subframe Spacers with hardware x 4
1.5” Rear Subframe Spacers with hardware x 4

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

EWORSF15

The product you are viewing cross references to these numbers

Subframe drop kit 0.50 inch. 
Designed for use with 2.5” to 3” lift kits

Fits:

Porsche 955 Cayenne - 2003 to 2006
Porsche 957 Cayenne - 2007 to 2010
Porsche 958 Cayenne - 2010 to 2018

Eurowise ½” Subframe Drop Kit

Lifting your Cayenne, Touareg, or Q7 changes the distance and angle between the transmission and wheel hubs, which can lead to axle binding, clicking, and an overall rougher driving experience. The Eurowise ½” Subframe Drop Kit helps correct these issues by lowering the subframe to improve alignment.

The kit includes 8 anodized billet spacers and extended hardware, allowing you to lower both the front and rear subframes. While not required for every build, we recommend a ½" drop when running approximately 2 inches of lift for optimal drivability.

Installing a subframe drop will slightly decrease overall lift.

Kit Includes:

(4) 1” Front Subframe Spacers w/ Hardware

(4) 1” Rear Subframe Spacers w/ Hardware

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

EWORSFD05

The product you are viewing cross references to these numbers

Subframe drop kit 2 inch. 
Designed for use with 4” lift kits or more

Fits:

Porsche 955 Cayenne - 2003 to 2006
Porsche 957 Cayenne - 2007 to 2010
Porsche 958 Cayenne - 2010 to 2017

The 2" Subframe Drop Kit is the largest we offer and is designed for use with lift kits of 4” or more. 

When lifting your vehicle, the angle and length between your wheel hubs and transmission increases. Our Subframe Drop Kits are designed to correct this change in axle geometry by lowering the subframe.

Our 2” Subframe Drop Kit lowers both front and rear subframes, eliminating lift restrictions due to axle geometry issues, and includes a steering shaft extension. This level of Subframe Drop Kit will bring the axle angle to nearly 5 degrees on 4” lifts.

Please Note: 

Eurowise Gas Tank Skid and Transfer Case Skids will not fit with a 2” subframe drop. If you currently have gas tank skids, you can cut the tabs off of each side and weld them on to the opposite sides to make them work. 

Exhaust modifications are required. Dropping the rear subframe 2” will cause it to contact your exhaust.

A 2” Subframe Drop will decrease overall lift height. For example, a 2.5” lift kit with a 1” subframe drop will result in 2” of actual lift. A 3” lift kit with a 1” subframe drop will result in 2.5” of actual lift.

Kit Includes:

2” Front Subframe Spacers with hardware x 4
2” Rear Subframe Spacers with hardware x 4
Steel Steering Shaft Extension with hardware x 1

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

EWORSF2

The product you are viewing cross references to these numbers