Subframe Drop and Suspension Lift Kits

Kit for front and rear subframes

Fits:

Porsche 955 Cayenne - 2003 to 2006
Porsche 957 Cayenne - 2007 to 2010
Porsche 958 Cayenne - 2010 to 2018

Subframe centering sleeves for the 955/957/958 Cayenne

These sleeves are designed to prevent your subframe from shifting and throwing off alignment while off-roading. When the Volkswagen Audi Group designed the Gen1 chassis, they made the subframe mounting holes larger than the bolt diameter. This is to allow for shifting of the subframe, to adjust caster and camber, but hard driving can introduce unwanted shifts.  

Eurowise centering sleeves keep your subframe static by taking up the negative space around the bolt. 

Please Note:
A subframe drop is not a replacement for centering sleeves. They are solutions to separate problems. 
Subframe centering sleeves can be used in conjunction with Subframe Drop Kits.

Porsche 958 Cayenne - 2010 to 2017

958 Cayenne owners - here's your lift solution. 

For the 958 Cayenne (2010-2017) & Touareg here is a 100% bolt on design. 

This will lift the vehicle 2 inches. Lift kit available in standard and HD version for those in need of heavy duty extreme use. HD version will need spherical sway bar links to retain the front swaybar. Rear air strut spacers.

Kit Includes
Front Strut Extensions x 2
Front Strut Extension Hardware 
Rear Strut Spacers x 4
Rear Strut Hardware1
1/2 inch Subframe Drop Kit Front and Rear
Air Suspension Level Links

Porsche 958 Cayenne - 2010 to 2017

2" lift kit for the second generation, 958 Porsche Cayenne and VW Touareg

Machined from a solid block of 6061 aluminum, these lift kits will never wear out or fail.

This is a direct bolt on lift kit that installs over the top of the OEM Strut in the front and between the upper strut mount and the spring on the rear. Requires removal of front and rear strut assembly. Front struts do not require disassembly.

What's different about our kit vs. the competitors? We include an shock shaft extension that accounts for the spacer that you install between the spring and strut mount. This keeps your spring rate, shock travel, and ride quality the same as OE. This also translates into better performance on the trails.

Strut extensions come with the option for vehicles with and without electronic dampening. To install the connector must be de-pinned, the harness fed through the center of the extension, and then the connector can be reassembled.

Fitment:  
2011-2018 Volkswagen Touareg (with steel coil spring suspension)
2011-2018 Porsche Cayenne (with steel coil spring suspension)

Kit Includes: 
 2 x Front Spacers with Hardware
2 x Rear Spacers  
2 x Rear Shock Extensions
1 x Loctite for Rear Shock Extension

Porsche 955 Cayenne - 2003 to 2006
Porsche 957 Cayenne - 2007 to 2010
Porsche 958 Cayenne - 2010 to 2018

When lifting your vehicle, the angle and length between your wheel hubs and transmission increases. Our Subframe Drop Kits are designed to correct this change in axle geometry by lowering the subframe.

Our 1” Subframe Drop Kit lowers both front and rear subframes, eliminating lift restrictions due to axle geometry issues. Used in conjunction with our 2.5” lift kit, a 1” Subframe Drop will result in nearly 0 degrees of axle angle.

Please Note: 
If you have Eurowise gas tank skids, you will need to leave the rear mounting point on the subframe attached so the rear portion that bolts to the bracket lines back up easily.

A 1” Subframe Drop will decrease overall lift height by 0.5”. For example, a 2.5” lift kit with a 1” subframe drop will result in 2” of actual lift. A 3” lift kit with a 1” subframe drop will result in 2.5” of actual lift.

Kit Includes:
1” Front Subframe Spacers w/ hardware x 4
1” Rear Subframe Spacers w/ hardware x 4

Porsche 958 Cayenne - 2010 to 2017

When lifting your vehicle the angle and length between your wheel hubs and transmission increases. Our Subframe Drop Kits are designed to correct this change in axle geometry by lowering the subframe.

Our 1.5” Subframe Drop Kit lowers both front and rear subframes, eliminating lift restrictions due to axle geometry issues. 
This level of Subframe Drop Kit is designed primarily for use in conjunction with our Eurowise, Eurowise+Bilstein, or Eurowise+JRZ coilovers.

Please Note: 
If you have Eurowise gas tank skids, you will need to leave the rear mounting point on the subframe attached so the rear portion that bolts to the bracket lines back up easily.

A 1.5” Subframe Drop will decrease overall lift height. For example, a 2.5” lift kit with a 1” subframe drop will result in 2” of actual lift. A 3” lift kit with a 1” subframe drop will result in 2.5” of actual lift.

Kit Includes:
1.5” Front Subframe Spacers with hardware x 4
1.5” Rear Subframe Spacers with hardware x 4

Porsche 955 Cayenne - 2003 to 2006
Porsche 957 Cayenne - 2007 to 2010
Porsche 958 Cayenne - 2010 to 2018

Eurowise ½” Subframe Drop Kit

Lifting your Cayenne, Touareg, or Q7 changes the distance and angle between the transmission and wheel hubs, which can lead to axle binding, clicking, and an overall rougher driving experience. The Eurowise ½” Subframe Drop Kit helps correct these issues by lowering the subframe to improve alignment.

The kit includes 8 anodized billet spacers and extended hardware, allowing you to lower both the front and rear subframes. While not required for every build, we recommend a ½" drop when running approximately 2 inches of lift for optimal drivability.

Installing a subframe drop will slightly decrease overall lift.

Kit Includes:

(4) 1” Front Subframe Spacers w/ Hardware

(4) 1” Rear Subframe Spacers w/ Hardware

Porsche 955 Cayenne - 2003 to 2006
Porsche 957 Cayenne - 2007 to 2010
Porsche 958 Cayenne - 2010 to 2017

The 2" Subframe Drop Kit is the largest we offer and is designed for use with lift kits of 4” or more. 

When lifting your vehicle, the angle and length between your wheel hubs and transmission increases. Our Subframe Drop Kits are designed to correct this change in axle geometry by lowering the subframe.

Our 2” Subframe Drop Kit lowers both front and rear subframes, eliminating lift restrictions due to axle geometry issues, and includes a steering shaft extension. This level of Subframe Drop Kit will bring the axle angle to nearly 5 degrees on 4” lifts.

Please Note: 

Eurowise Gas Tank Skid and Transfer Case Skids will not fit with a 2” subframe drop. If you currently have gas tank skids, you can cut the tabs off of each side and weld them on to the opposite sides to make them work. 

Exhaust modifications are required. Dropping the rear subframe 2” will cause it to contact your exhaust.

A 2” Subframe Drop will decrease overall lift height. For example, a 2.5” lift kit with a 1” subframe drop will result in 2” of actual lift. A 3” lift kit with a 1” subframe drop will result in 2.5” of actual lift.

Kit Includes:

2” Front Subframe Spacers with hardware x 4
2” Rear Subframe Spacers with hardware x 4
Steel Steering Shaft Extension with hardware x 1

Porsche 958 Cayenne - 2010 to 2017

Product Description

Eurowise transmission drop spacers are designed to realign your driveshaft when lowering the subframe. We created these spacers specifically for the Gen 1 and Gen 2 Porsche Cayenne, Volkswagen Touareg, and Audi Q7 platforms after observing improved longevity of the input/output shaft seals on the driveshaft compared to vehicles without them. In some cases, they have also helped reduce drivetrain vibration on higher-mileage vehicles with worn driveshaft joints.

After 4+ years of research on hundreds of vehicles. We've seen front and rear driveshaft flex dust boots tear or separate from the subframe drop causing slight angle change from the drop. In some cases if your original boots were worn out it could be unavoidable. While the transmission spacer drop is not 100% required. Its advantageous to replace to keep driveline angles straight and extent the rubber boot life. This kit drops the transmission and center driveshaft support. Also included is a center support bracket to replace the original one from rubbing.

Select the thickness of the transmission drop bracket according to your subframe drop size. If you have a 1/2 inch subframe drop, you will not receive center support bearing drop spacers 

Product Includes: 
2 x Transmission drop spacers
1 x Tunnel brace
1 x Driveshaft support drop spacers
1 x Installation hardware

*only 1 pair per order*

0.5” Spacer Kit - For vehicles with .5" Subframe Drop 

1” Spacer Kit - For vehicles with 1” Subframe Drop 

1.5” Spacer Kit - For vehicles with 1.5” Subframe Drop 

Additional Options:
After over four years of research on hundreds of vehicles, we've found that front and rear driveshaft flex dust boots can tear or separate from the subframe drop, leading to slight angle changes. In some instances, worn-out original boots may make this unavoidable. While a transmission spacer drop isn't always necessary, it can help maintain proper driveline angles and extend the life of the rubber boots.

This kit includes a transmission and center driveshaft support drop, along with a center support bracket designed to replace the original one, preventing potential rubbing issues.

Choose the appropriate transmission drop bracket thickness based on your subframe drop size. Note: If you have a 1/2-inch subframe drop, center support bearing drop spacers will not be included.