Mini

Comfort roof control for BMW 1 series E88 and Mini convertible R57 STLFBW4

The SmartTOP roof control unit allows you to open or close the convertible top while driving at slow speeds. It works similar to power-windows and opens or closes the roof automatically at the touch of a button. It is not necessary to stop the vehicle and pull the handbrake to operate the roof.

Designed For:
BMW 1 Series (E88)
Mini Convertible (R57)

Remote control of convertible top
Open/Close your convertible top using the original factory remote control key / key fob.

Open/Close the top while driving
Never have to stop again for your top: Open/Close your top while driving. Speed programmable up to 40kmh.

One-Touch power convertible top
"One-Touch" convertible top operation allows your top to open or close automatically.

Range Extender
Increases the remote range, allowing you to operate the top from the same distance as the door locks.

Individually programmable
Configure all functions of the module to meet your personal preferences via our signature blinker setup menu.

Passive / Invisible mode
Turn the whole module off with an easy key sequence. Ideal when letting someone else drive your car.

Reversible plug-in installation
Remove any time allowing sale or return of a leased vehicle in its original condition.

Separate window control
Raise and lower the windows separately by remote without activating the top.

Separate Sunroof control (Mini)
Open and close the sunroof separately by remote without activating the top.

Top convenience mode
Turning the ignition on or off does not interrupt convertible top operation.

Comfort window close
One-Touch operation when closing all windows simultaneously via the separate driver's door switch.

Folding Mirrors (E88)
On models equipped with motorized mirrors, fold them in and out by remote.

Automatic door unlocking
Automatically unlock the doors when turning the ignition off. No more pulling the door handle twice.

All door unlocking (Comf.Acc.)
Touch sequence on driver's door handle opens all doors (Comfort Access option required)

Plug-n-Play Wiring harness
Custom designed plug-in-between wiring harness for extremely simple and quick installation included.

USB Port for easy setup / updates
This module can be configured and updated using any Mac or PC.

E13 Certification: E13 10R – 03 10070
Standby Power: <0.1MA
Dual Color LEDs: Yes

Front lower arm suspension bush FRONT bush. BMW / Mini

Set of 2 for both wishbones

Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:

- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components.

iCarsoft CR PRO Professional multi-system car diagnostic tool for multiple global car brand manufacturers.

iCarsoft CR MAX BT is a professional and powerful vehicle fault diagnosis tool for multi-brand vehicles (more than 40 vehicle makes) developed by iCarsoft technology inc. 
With a 7.0" LCD capacitive touchscreen that displays at 1024x600 quality with the ability to quickly read and clear DTCS for all available modules for the majority of makes and models on the market, the CR MAX provides you with superior special functions. 

It features full ECU diagnosis for most vehicle brands and test modes mainly includes: CANBUS, ISO9141, KWP2000, AND J1850 etc.

It enables technicians to accurately diagnose complex problems 

Product Features

1. Comprehensive OBD relearn coverage.
2. Onscreen relearn procedure.
3. Read &Clear codes for all available systems.
4. Display live data in text, graph & analog for easy data review.
5. Auto VIN technology can automatically identify model and year information in no time.
6. Actuation Test / Bi-directory Test is used to access vehicle-specific subsystem and component tests.
7. Steering Angle Sensor (SAS) calibration: Calibrates the steering wheel to straight ahead, or recalibrates SAS while steering part replacement.
8. Oil Light/Service Reset: Support service lamp reset, reset service mileage and service intervals.
9. Electronic Parking Brake (EPB): System maintenance deactivates and reactivates the EPB system for replacement and initialization.
10. Diesel Particulate Filter (DPF): Regeneration control system, requests the DPF regeneration process while DPF blockage and turn off the DPF indicator.
11. Battery Management System (BMS): Registers new battery to the BMS while battery replacement.
12. Electronic Throttle Control system (ETC): Relearns the throttle valve control value while clear or replaces the throttle value.
13. ABS Bleeding: Release the air to restore ABS brake sensitivity, or relearn while ABS replaced.
14. Injector coding: Relearn the injector control parameter while the injector renewed or replaced.
15. Support TPMS programming service: It allows you to look up the tire sensor IDs from the vehicle's ECU, inputting TPMS sensor replacement IDs and testing sensors.
16. AFS Head Lamp reset means that the adaptive front lighting system can be rotated to either side, pressing the button means they stay pointing straight forward, and don’t turn anymore when turning the steering wheel.
17. Air Suspension: Try reset electronic suspension air ride with the message system close all doors flip through message system go to suspension reset or off.
18. Gearbox Reset: Procedure Reset Transmission Adaptive Learning DIY. Start the car and drive. Once you perform this procedure the Engine Control Unit (ECU) and Transmission Control Unit (TCU) will work together to learn how you drive by monitoring your driving pattern. After you follow this programming method of the TCU / ECU drive the car.
19. Air conditioning service: Calibration of air-conditioning related control units, such as additional calibration of air mass flow, etc.
20. Air Filter Self-learning process after replacing the air filter.
21. Fuel Pump activation function, activate it when replace a new one.
22. DTC library to look up when user is operating this tool.
23. Support Freeze Frame of Fault Code functions.
24. Automatic software upgrade.
25. Easy to feedback test questions online.
26. Provides convenient instruction with customer in interface.
27. Multi-language: English, German, Dutch, Spanish, French. (More languages will be added in the future.) Note!
*Certain functions may be limited from the vehicle manufacturer due to the requirement of a special factory access code.
*This scan tool covers 20 years models, so some functions may not be available on all years /models.
*We reserve the rights to make any change to this description without notice.

Operating System: Android 8.1.0
Processor: Quad-core 1.3 GHZ
Memory：16GB
Display：7-inch LCD Capacitive touchscreen with 1024x600 resolution
Connectivity: Mini USB 2.0/ USB2.0/ Wi-Fi / Bluetooth/OBD II
Body Colour: Black
Audio Output: Buzzer and Speaker
Input: N/A
Power and Battery: 3.7 V/5000MAH Lithium-Polymer battery
Charges Via 5 VDC Power Supply: 0BD DLC Voltage Range:9-18V
Test battery life: Around 5 hours of continuous use
Battery  Charger:5V/2A
Power Consumption:500MA (LCD on with default brightness, Wi-Fi on) @3.7 V
Operating Temp: 0 to 40° C (32 TO 104°F)
Storage Temp:-20 TO 70° C(-4 TO 158°F)
Operating Humidity: 5%-95% Non-condensing
Dimensions (W*H*D): 40.0MM*150.0MM*35.0MM
Net Weight:750G

iCarsoft CR V2.0 Professional Diagnostic Tool for Multi Brand Vehicles

Display: 4.0″ TFT LCD, 480*320 Pixels
Operation Temperature: 0°C ~ 50°C
Storage Temperature: -20°C ~ 70°C
Operating Voltage: 9 ~ 18V
Operating Current: 150mA@12V (Typical)
Power Consumption: 1.8W (Typical)
Dimension: 206*104.1*32.6 mm (L x W x H)

Contents:
CR V2.0 (1+4) Main Unit
TF card (In the main unit)
Main Cable
Data Cable
User Manual

Product Features

1. iCarsoft CR V2.0(1+4) can do it all-reads and clears trouble codes on most of the systems such as engine, transmission, ABS and airbag etc.
2. Support OBDII/EOBD Ten Modes of Operation
3. Read Live Data
4. Full ECU Diagnosis
5. Applies to the single Brand of most of the Models which equipped with OBDII-16 DLC
6. Easy To Use With Silicone Keys
7. Oil Light/Service Reset: Support service lamp reset.
8. Electronic Parking Brake (EPB) system maintenance deactivates and reactivates the EPB system for replacement and initialization.
9. Battery Management System (BMS), registers new battery to the BMS while battery replacement.
10. Diesel Particulate Filter (DPF) regeneration control system, requests the DPF regeneration process while DPF blockage and turn off the DPF indicator.
11. Electronic Throttle Control system (ETC) relearns the throttle va value while clear or replaces the throttle valve.
12. SAS: Steering Angle Sensor (SAS) calibration, calibrates the steering wheel to straight ahead, or recalibrates SAS while steering part replacement.
13. ABS Bleeding, release the air to restore ABS Brake sensitivity, or relearn while ABS replaced.
14. Injector coding, relearn the injector control parameter while the injector renewed or replaced
15. The Print Data function allows you printing out diagnostic data recorded by the scan
16. Battery test allows you getting the voltage of battery with OBD port by the scan tool when the engine starts.
17. DTC Library to lookup when user is operating this tool.
18. Upgrade Via PC
19. Multi-language: English, German, Dutch, Spanish, French.

OBDII Function

• Read Codes
• Erase Codes
• I/M Readiness -- I/M Readiness indicate whether or not the various emissions-related systems on the vehicle are operating properly and are ready for Inspection and Maintenance testing.
• Data stream.
• Freeze Frame -- When an emission-related fault occurs, certain vehicle conditions are recorded by the on-board computer. This information is referred to as freeze frame data. Freeze Data is a snapshot of the operating conditions at the time of an emission-related fault.
• O2 Sensor Test -- This option allows retrieval and viewing of O2 sensor test results for most recently performed tests from the vehicle's on-board computer.
• On-Board Monitoring -- This function can be utilized to read the results of on-board diagnostic monitoring tests for specific components/systems.
• Evap System Test -- The EVAP test function lets you initiate a leak test for the vehicle's EVAP system. Before using the system test function, refer to the vehicle's service repair manual to determine the procedures necessary to stop the test.
  
• Vehicle Information -- The option displays the vehicle identification number (VIN), the calibration verification number (CVN), and other information of the test vehicle.
• Retrieve generic (P0, P2, P3, and U0), manufacturer specific (P1, P3, and U1) codes and pending codes
• Turn off Check Engine Light (MIL), clear codes and reset monitors
• Read live PCM DataStream 
• Support CAN (Controller Area Network) and all other
• Multilingual menu and DTC definitions- English, Spanish, and German etc.
• Read pending DTCs
• Read permanent DTCs
• DTCs search
• Supports most of the OBDII/EOBD test modes include: CAN, ISO9141, KWP2000, J1850 VPW and J1850 PWM.
• Works on most of 2001 and later OBDII compliant PETROL European vehicles
• Works on most of 2004 and later OBDII compliant DIESEL European vehicles
• Works on most of 1996 and later OBDII compliant US and Asian vehicles
• View & Graph Live Data in Color Graphing and blazing fast refresh rate for better graphing and live data readings.
• Comprehensive Help, Including OBD Parameter, Mode Explanations & More

iCarsoft VDSP2000 Videoscope for CR Max BT diagnostic tool



Only  to be used with CR MAX BT diagnostic tool

The iCarsoft USB Inspection Camera VDSP2000 Videoscope is a perfect tool for viewing and capturing video and still images of hard-to-reach areas.

It’s a perfect partner for iCarsoft tablet diagnostic tool CR MAX BT.

With its fluid resistant 5.5mm head and LED illumination, dark and fluid soaked areas are no longer a problem.

Features and Advantages

• View and record images and videos.
• Take images easily with one-click snap shot button.
• Easy to adjust the strength of light (6 levels).
• Extremely small 5.5mm camera-IP67 certified for immersion, allows for use in wet, fluid soaked spaces.
• 5.5mm camera head easily fits into most spark plug holes for inspection.

Specifications

Len O.D. (mm) : 5.5mm
Tube O.D. (mm) : 4.8mm
Tube Length: 1000mm
USB Cable Length: 1500mm
Resolution: 1280x720
Operating Temperature: 0℃~65℃
Power Supply: USB 5V
USB Port: USB2.0/Type C/Micro USB

PFC brake pads, Rear. MINI Cooper S JCW



The absolute best brakes on the market Performance Friction brakes are the standard of excellence in high-performance vehicles, and street vehicles.

Track days and street upgrades for nearly every make and model are manufactured to meet or exceed OE specifications.


Sold as set of 4 pads for one axle.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

1060.10

The product you are viewing cross references to these numbers

Roof top control for BMW Z4 E85 and Mini R52 

The SmartTOP roof control unit allows you to open or close the convertible top while driving at slow speeds. It works similar to power-windows and opens or closes the roof automatically at the touch of a button. It is not necessary to stop the vehicle and pull the handbrake to operate the roof.

Designed For:
BMW E85 Z4 Roadster - 2002 to 2008 
Mini R52 Convertible 

One-Touch power convertible top
"One-Touch" convertible top operation allows your top to open or close automatically.

Open/Close the top while driving
Never have to stop again for your top: Open/Close your top while driving (up to 40km/h).

Top convenience mode
Turning the ignition on or off does not interrupt convertible top operation.

Remote control of convertible top
Open/Close your convertible top using the original factory remote control key / key fob.

Separate window control
Raise and lower the windows separately by remote without activating the top.

Window positions
Window positions (up/down) after top opening programmable.

Hazard Signals
Optionally the blinkers are activated while top is operated from the remote.

Mirror Park Assist
This feature can automatically dip down the passenger mirror in reverse gear.

Home Light
Remotely activate the front and tail lights.

Automatic door locks
Set power locks to automatically lock and unlock the doors when you drive.

Comfort Blinkers
Tap the blinker stalk briefly to trigger the blinker three times.

Full text setup in car display
Configure functions of the module to meet your personal preferences via our full text setup menu.

Passive Mode
Turn the module off with a quick key sequence when unaltered factory operation is desired.

Valet Mode
Lock the top in the closed position with a quick key sequence when needed.

Reversible plug-in installation
Remove any time allowing sale or return of a leased vehicle in its original condition.

Plug-n-Play Wiring harness
Custom designed plug-in-between wiring harness for extremely simple and quick installation included.

USB Port for easy setup / updates
This module can be configured and updated using any Mac or PC.

E13 Certification: E13 10R – 03 10070
Standby Power: <0.1MA
Dual Color LEDs: Yes

SmartTOP Comfort roof control for Mini F57



Designed for:
Mini Convertible (F57)

One-Touch power convertible top
"One-Touch" convertible top operation allows your top to open or close automatically.

Remote control of convertible top
Open/Close your convertible top using the original factory remote control key / key fob.

Separate window control
Raise and lower the windows separately by remote without activating the top.

Top convenience mode
Turning the ignition on or off does not interrupt convertible top operation.

Keyless top control*
Open and close the top by touching the door handle.
*Keyless entry option required.

Separate Sunroof control
Open and close the sunroof separately by remote without activating the top.

Range Extender
Increases the remote range, allowing you to operate the top from the same distance as the door locks.

Comfort window close
One-Touch operation when closing all windows simultaneously via the separate driver's door switch.

Individually programmable
Configure all functions of the module to meet your personal preferences via our signature blinker setup menu.

Passive / Invisible mode
Turn the whole module off with an easy key sequence. Ideal when letting someone else drive your car.

Reversible plug-in installation
Remove any time allowing sale or return of a leased vehicle in its original condition.

Plug-n-Play Wiring harness
Custom designed plug-in-between wiring harness for extremely simple and quick installation included.

USB Port for easy setup / updates
This module can be configured and updated using any Mac or PC.

E13 Certification: E13 10R - 03 10070
Standby Power: < 0.1mA
Dual color LEDs: YES

Universal Air induction kit with 6" Cone filter and alloy billet funnel.

Can be adapted to various vehicles.

Filter height: 6 inch / 15cm
Filter diameter at base: 7 inch / 18cm
Funnel height: 8 inch / 20cm
Filter diameter at base: 3,5 inch / 9cm
Overall height: 13inch / 33cm