Please wait… 
Please wait while we process your order,
do not press the back button… 
Design 911 Design 911 supply Porsche parts, Porsche spares and Porsche accessories, to both retail and to the trade. Our Porsche product and accessory range includes brakes, exhausts, tyres, wheels and Porsche panels and interiors. https://design91.uk/images/schemaLogo.png https://design91.uk/images/schemaLogo.png +443456003478 https://design91.uk Facebook Instagram

Tow Eye Hooks & Tie Downs

Refine by Car Type
Filter by brand
DISPLAYING 17 to 30 (of 30 products)
1 2
Best Price
E3647SB97
Product Information
Product Information
Rennline Rear Subframe Stabilizer with Tie Downs (Front & Rear).

Fits:
Porsche 981 Boxster
Porsche 981 Cayman

Subframe Stabilizer:
Most Boxster and Cayman owners who take their cars to the track, have equipped their Porsches with tires much wider and stickier than stock, which allows higher g-forces to be achieved in cornering and braking. During that type of hard driving, the 2 piece rear sub frame flexes by the extreme loads being put on them, defeating your car's finely tuned alignment settings, thereby reducing your braking and cornering potential, and increasing tire wear. With this install, your Porsche will handle and brake with greater precision, predictability, and feedback to the driver. Comes with integrated rear tie down brackets and hardware for a 10 minute installation.

Front Tie Downs:
Securing a 981 to a trailer is next to impossible without the use of wheel straps that are just about guaranteed to destroy your wheels in time. Save those expensive wheels with a set of inexpensive tie down hooks from Rennline. These hooks have been specifically engineered to bolt to the front of your car without any modification or removal of any factory torqued bolts. Additionally, Rennline has incorporated a much needed jack pad into the front tie downs that will allow you to easily lift the front of your car without the worry of damaging your rocker panel or plastic under trays. Hooks are constructed of steel and powder coated red.

Rear Tie Downs:
These hooks have been specifically engineered to bolt to the rear of your 981 and come with any necessary hardware and installation instructions. Hooks are constructed of steel and powder coated red. Each kit comes with (2) rear hooks.

Note: Pictures may not show actual product.
Best Price
E67
Product Information
Product Information
Rennline Retractable Tow Hook

Fits:
Porsche 964 1989-94 Front
Porsche 986 Boxster 1997-04 Front
Porsche 996 Front & Rear

A majority of newer factory built race cars feature retractable tow hooks, and now Rennline has engineered a tow hook for your custom race car that offers the same advantages. These retractable tow hooks are available as “bolt on” units for any corner of your 964/993 with fiberglass bumpers, or when used with our universal mounting brackets, these hooks can be mounted in many different configurations based on your specific needs. Made from powder-coated steel with a spring-loaded retractable hook and comes with (2) tow stickers. Your shins will thank you.

To see this hook in action, CLICK HERE

Note: Pictures may not show actual product.
Best Price
E30
Product Information
Product Information
Rennline Safety Sticker and Decal Kit.

Rennline 34 piece vinyl decal kit fulfill the requirements of race regulations enforced by many race class governing bodies. This kit includes:

(8) Jack Point Decals
(12) Tow Decals
(4) Turn This Way decals
(2) Battery Disconnect Decals
(4) Neutral Safety Stickers
(2) Rennline Decal

Note: Pictures may not show actual product.
Best Price
E308
Product Information
Product Information
Rennline strap style tow hook.

Fits
Porsche 944
Porsche 968
Porsche 911
Porsche 964
Porsche 993
Porsche 996
Porsche 997
Porsche 986 Boxster
Porsche 987 Boxster /Cayman

Product Description

Introducing the latest in Rennline tow hook innovation: The Race Tow Strap. High strength base screw and Polyester strap design. Installs in minutes on most Porsche, BMW, MINI, Audi, or VW with factory screw type tow hook receptacles.
Designed to handle any off-track adventure quickly and reliably with a focus on safety and quality.

&bull: Can fit front or rear
• Aerospace grade 17-4 PH stainless steel base screw
• 100% Polyester strap with embroidered Rennline logo
• Highly visible Red webbing for quick identification
• Strap is UV resistant to protect against discoloration
• Boxed/cross stitched strap for strength and durability
• Triple layered webbing joint folds at high stress point of base screw for additional strength
• Folded strap at high stress attachment point to base screw for added strength
• Meets requirements for most organized race events requiring a 2" ID opening
Best Price
E36
Product Information
Product Information
Rennline Tie Down / Jack Plate. FRONT

Fits:
Porsche 991
Porsche 981 Boxster
Porsche 981 Cayman

Securing a 718/ 981 / 991 to a trailer is next to impossible without the use of wheel straps that are just about guaranteed to destroy your wheels in time. Save those expensive wheels with a set of inexpensive tie down hooks from Rennline. These hooks have been specifically engineered to bolt to the front of your car without any modification or removal of any factory torqued bolts. Another great feature of these hooks are that Rennline has incorporated a much needed jack pad that will allow you to easily lift the front of your car without the worry of damaging your rocker panel or plastic under trays. Hooks are constructed of steel and powder coated red.

Each kit comes with (2) front hooks and all hardware needed for a 5 minute installation.

Please Note:
Requires trimming of the plastic tray under the 718 and 718 GT4
Best Price
E04
Product Information
Product Information
Rennline Tie Downs. UNIVERSAL
SET OF 2

Rennline's tie-down brackets are made of either stainless steel, or mild steel in red powdercoat. These brackets are available in four variations: straight, 90°, 66°, and 45° to allow you to install these brackets in many different locations based on your specific needs. Mounting hole measures 16.5mm. This is the same dimension as most shock mount bolts and several other suspension components.

The 66° tie downs are designed specifically for 996/997 with upgraded rear sway bars. GT2 and GT3 cars will also use the 66° tie down.

Note: These come in sets of 2

Note: Pictures may not show actual product.
Best Price
E33
Product Information
Product Information
Rennline Tow Stickers (Pair)

Replacement tow stickers for all Rennline tow hooks. Available in Red, Black, Yellow, Blue, Green, or Grey. Come as a set of two.

NOTE Stickers only, tow hook not included.
Note: Pictures may not show actual product.
Best Price
E82
Product Information
Product Information
Rennline Universal Screw in Tow Hook Receiver
Flat - Weld or Bolt on

This screw in tow hook receiver is designed to be bolted in place, out of site and then when needed, the screw in tow hook can simply be threaded in.

Note: Designed for use with Rennline's screw in tow hooks (part numbers E05.09, E06.09, OR E13.09). Screw in tow hooks not included.

Note: These have no finish

Note: Pictures may not show actual product.
Best Price
E83
Product Information
Product Information
Rennline Universal Screw in Tow Hook Receiver
90° - Weld or Bolt on

Requires a screw tow hook E1309

This screw in tow hook receiver is designed to be bolted in place, out of site and then when needed, the screw in tow hook can simply be threaded in.
Note: Designed for use with Rennline's screw in tow hooks (part numbers E05.09, E06.09, OR E13.09). Screw in tow hooks not included.

Note: These have no finish

Note: Pictures may not show actual product.
Best Price
E84
Product Information
Product Information
Rennline Universal Screw in Tow Hook Receiver
Universal 90° Base Plate

This Universal base Plate is designed to be bolted in place, out of site and then, when needed a screw in tow hook receiver with tow hook can be threaded into place (works with part numbers E81-4 and E81). This particular mount allows for 2-5" of adjustability depending which mounting holes are used.

Note: This is the base plate only; screw in tow hook, or receiver not included. Designed for use with screw in tow hooks part numbers E05.09, E06.09, OR E13.09, and screw in tow hook receivers part numbers E81-4, E81-10, OR E83.

Note: These have no finish

Note: Pictures may not show actual product.
Best Price
E80
Product Information
Product Information
Rennline Universal Screw in Tow Hook Receivers

This tube receiver is designed for use with part numbers E85, E86, and E87. It can be bolted in place and out of site using our optional mounting brackets, and then when needed, the screw in tow hook can simply be threaded into the end of the tube. These receivers have no finish.

Note: Designed for use with screw in tow hooks part numbers E05.09, E06.09, OR E13.09. Screw in tow hooks not included.

Note: Pictures may not show actual product.
Best Price
E32
Product Information
Product Information
Front Tie Down / Jack Plate - FRONT

Fits:

Porsche 997
Porsche 996
Porsche Boxster
Porsche Cayman

Securing a 997/996/Boxster or Cayman to a trailer is next to impossible without the use of wheel straps that are just about guaranteed to destroy your wheels in time. Save those expensive wheels with a set of inexpensive tie down hooks from Rennline. These hooks have been specifically engineered to bolt to the front of your car without any modification or removal of any factory torqued bolts. Another great feature of these hooks are that Rennline has incorporated a much needed jack pad that will allow you to easily lift the front of your car without the worry of damaging your rocker panel or plastic under trays. Hooks are constructed of steel and powder coated red.

Each kit comes with:
- (2) front hooks
and all hardware needed for a 5 minute installation.

Note: Pictures may not show actual product.
Best Price
E3204
Product Information
Product Information
Rennline Tie Down / Jack Plate Set.
FRONT & REAR

Fits:
Porsche 997
Porsche 996
Porsche Boxster
Porsche Cayman

Securing a 997/996 to a trailer is next to impossible without the use of wheel straps that are just about guaranteed to destroy your wheels in time. Save those expensive wheels with a set of inexpensive tie down hooks from Rennline. These hooks have been specifically engineered to bolt to the front and rear of your car without any modification . Another great feature of the front hooks is that Rennline has incorporated a much needed jack pad that will allow you to easily lift the front of your car without the worry of damaging your rocker panel or plastic under trays. Hooks are constructed of steel and powder coated red.

Each kit comes with:
- (2) front hooks
- (2) rear 66° hooks
and all hardware needed for a 5 minute installation.

Note: Pictures may not show actual product.
Special Order item
97072155105
Product Information
Product Information
Tow eye hook.

Fits:
Porsche 991.1 Carrera 2012-16
Porsche 991.2 Carrera 2017-19
Porsche 991 Turbo 2014-2020
Porsche 991 GT3 2014-21
Porsche 981 Boxster 2012-16
Porsche 981SP Boxster Spyder 2016
Porsche 982 Boxster 2017>> 
Porsche 982SP Boxster Spyder 2019>>
Porsche 981C Cayman 2014-16
Porsche 981C Cayman GT4 2016
Porsche 982C Cayman 2017>>
Porsche 982C Cayman GT4 2019>>
Porsche 970 Panamera 2010-16
Porsche 918 Spyder 2015

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

97072155105
97072155105
97072155102
97072155101

The product you are viewing cross references to these numbers
DISPLAYING 17 to 30 (of 30 products)
1 2
Also found on these pages
You may also like
Popular Models