Sport & Track Seats

3D-printed Bucket seat centre panel.
Please note: Only available for vehicles with full-bucket seats and only for the driver's seat.



Fits:
Porsche 911 (991) R / GT3 / GT3 RS
Porsche 911 (991 II) Carrera T / Speedster / GT3 / GT3 RS / GT2 RS
Porsche 911 (992) Carrera GTS / Carrera 4 GTS
Porsche 911 (992) Turbo / Turbo S
Porsche 911 (992) GT3 / GT3 with Touring-Package
Porsche 718 (981) Boxster Spyder
Porsche 718 Boxster (982) GTS / GTS 4.0 / T
Porsche 718 Cayman (982) GTS / GTS 4.0 / T / GT4 / GT4 4.0
Porsche 718 Spyder

The 3D printed bodyform full-bucket seat combines maximum functionality with individual design. The seat cushion and the seat backrest of the full-bucket seat already installed in the vehicle are replaced by new elements. These consist of a solid and energy-absorbing substrate material, a 3D-printed elastic grille structure and a perforated top covering made of Race-Tex. The grille structure and perforation improve both the passive air conditioning and the resilience of the seat. At the same time, depending on the selected degree of hardness, the upholstery has a weight advantage of more than 8% compared to the standard material. A deep seat position typical of motor sports and increased lateral support thanks to a thigh cushion provide an even more direct feel for the track - for an experience similar to that in motor racing.

As a visual highlight, the visible grille elements on the cushion and backrest are available separately in various colours.

The 3D printed bodyform full-bucket seat can be installed and removed again in a few simple steps. Compatible with both 3- and 6-point seat belts. Includes a practical transport bag.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

982044779

The product you are viewing cross references to these numbers

Adjustable lumbar support lightweight bucket seat. 
Sold each - One per seat

Fits:
Porsche 718 Boxster / Cayman - 2017 Onwards
Porsche 991  - 2019 to 2019
Porsche 992 - 2019 Onwards
Porsche 918 Spyder- 2014 to 2016

The incredible Lightweight Bucket Seats from Porsche adorn many vehicles from the 918 to the GT3, GT2, GT4, T and many other models if so equipped. 

We created this adjustable lumbar support for our vehicles out of necessity. Not only for the driver but the passenger who agreed to that 6 hour journey as our co-pilot. Typically these are quite comfortable seats but on longer journeys, a little lumbar support goes a long way to comfort the back of you and your co-pilot. 

These install in a minute for each side, adjustable for height (lower back, small of back, etc)

The air bladder is adjustable via a simple and lightweight ball pump and once the desired support is obtained, the ball pump can be removed and the hose and check valve tucked into the seat for an invisible install. Or just keep the ball for adjustment at anytime.

Cover cap Sports Seat adjustment lever. 
Sold each - fits left and right hand seats

Fits:
Porsche 981 Boxster - 2012 to 2016
Porsche 981 Cayman - 2012 to 2016
Porsche 718 Boxster - 2017 to 2024
Porsche 718 Cayman - 2017 to 2024

For cars with Sport Seats

Diagram ref no 15

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

981521629001E0

The product you are viewing cross references to these numbers

Grille elements for 3D-printed Bucket seat centre panel.
3-parts

"Grille elements in Black, 9820447898YR"

"Grille elements in Guards Red, 98204478984A"

"Grille elements in Racing Yellow, 9820447891S1"

Fits:
Porsche 911 (991) R / GT3 / GT3 RS
Porsche 911 (991 II) Carrera T / Speedster / GT3 / GT3 RS / GT2 RS
Porsche 911 (992) Carrera GTS / Carrera 4 GTS
Porsche 911 (992) Turbo / Turbo S
Porsche 911 (992) GT3 / GT3 with Touring-Package
Porsche 718 (981) Boxster Spyder
Porsche 718 Boxster (982) GTS / GTS 4.0 / T
Porsche 718 Cayman (982) GTS / GTS 4.0 / T / GT4 / GT4 4.0
Porsche 718 Spyder

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

982044789

The product you are viewing cross references to these numbers

Seat cover and softer foam set.
Porsche 918 fixed carbon bucket seats



If your car is equipped with the 918 fixed carbon bucket seats, changing the appearance has never been easier.

Choose from the OEM 911R onwards factory Black/Silver or Agate Grey material (not a reproduction) or our range of Pepita Houndstooth Fabric.

This set comes complete with new backrest and seat base foams (softer than the factory originals) covered in your desired material and fitting is straightforward.

Some found the factory original foams too hard so we have developed replacement foam sets slightly softer than the factory originals for a more comfortable ride, but still with all the factory details.

Please Note
When fitting sets to 2021 seats and onward make sure you disconnect the battery while working on the seats in order not to get any warning lights appearing.

Seat cover and standard foam set. Porsche 918 fixed carbon bucket seats



If your car is equipped with the 918 fixed carbon bucket seats, changing the appearance has never been easier.

Choose from the OEM 911R onwards factory Black/Silver or Agate Grey material (not a reproduction) or our range of Pepita Houndstooth Fabric.

This set comes complete with new backrest and seat base foams (as factory original) covered in your desired material and fitting is straightforward.

The foam used in these are the same density as the factory items. If you find these to hard, please see our range of softer foams.

Please Note
When fitting sets to 2021 seats and onward make sure you disconnect the battery while working on the seats in order not to get any warning lights appearing.

Seat Sliders - Left or right.



Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9975214

The product you are viewing cross references to these numbers

Side bolster protector covers. Porsche 918 fixed bucket seats



If your car is equipped with the 918 fixed carbon bucket seats, it can be a physical challenge climbing in and out, leading to visible scuffing, deep creases in the leather trim and torn stitching.

Here is a solution in the form of its 918 seat bolster protectors.

Once installed over the outside bolsters of both seats, this new-to-market product perfectly replicates the look of the standard bolster due to being made from Porsche factory black Napa leather and deviated stitching in the colour of your choice.
Along with the additional 'cuff cover', these protectors will also shield the rear of the bolster without looking out of place and installation is easy.
Please Note Protector "Cuff" does not have deviated stitching

Sold as a pair - Left and Right seat

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

918BOLSTERCVR

The product you are viewing cross references to these numbers

Track Bucket Sports Seat - DTX RECLINE



Fit most 911's, 996, Boxster, 997, Cayman

Light weight carbon fibre bucket seats with reclining back rest and removable back and bottom pads.

This seat is available in following materials:
Leather, Alcantara, Leather (outer) & Alcantara (inner).

These sports seats are manufactured for all makes and models.
Due to the universal nature of this product some modification or
alteration maybe required to the seat or car to ensure correct fitting

To view more detailed pictures please CLICK HERE

- These seats come complete with bottom sliders and side brackets. You will need to order extra
Code: SB017DR (LEFT SEAT) and SB017PA (RIGHT SEAT) for seat fixing adaptors for 986/996/997/987/CAYMAN.

Price is per seat.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99978091

The product you are viewing cross references to these numbers