B-G Racing Motorsport Equipment

Pre-drilled with a 3x50.8mm PCD bolt pattern, perfect for raising the steering wheel away from the driver to improve comfort and/or provide clear line of sight to the instrument panel.



Material: Aluminium
Depth: 15mm
Fitment: 3x50.8mm PCD

Please Note: This is not compatible with the MOMO Horn Button Retaining Ring.

B-G Steering Wheel Spacers are produced from high quality aluminium with an elegant black anodised finish and laser etched B-G logo, and are simple to fit using the fixing screws provided.

• First Class Design
• Impeccable Racing Pedigree
• One Year Warranty

B-G Racing 15mm eccentric steering wheel spacer 6x70mm PCD



Material: Aluminium
Depth: 15mm
Fitment: 6x70mm PCD

B-G Steering Wheel Spacers are produced from high quality aluminium with an elegant black anodised finish and laser etched B-G logo, and are simple to fit using the fixing screws provided.

Pre-drilled with a 6x70mm PCD bolt pattern suitable for most aftermarket hub kits, perfect for either raising or lowering the steering wheel to improve driver comfort and/or provide clear line of sight to the instrument panel.

• First Class Design
• Strong & Lightweight Construction
• Elegant Finish
• Suitable For most Aftermarket Hubs
• One Year Warranty

B-G Racing Horn button retaining ring - low profile



Used to attach a MOMO Horn Button to any MOMO steering wheel, this B-G Low Profile Horn Button Retaining Ring is compatible with all MOMO horn buttons that require a securing plate from the rear of the steering wheel. Attached between the MOMO Hub Kit and steering wheel this part enables you to safely secure the horn button in place.

This B-G Horn Button Retaining Ring also enables the user to fit a MOMO horn button with any of the B-G Steering Wheel Spacers.

Outer Diameter: 80mm
Inner Diameter: 51mm
Fitment: 6x70mm or 6x74mm PCD
Part Number: BG8361

B-G Racing Rubber packers for wide angle rear view mirror brackets



This set of Rubber Packers allows our 1.75" Wide Angle Rear View Mirror Brackets to be used with either 1.5" or 1.7" diameter roll cage bars.

Simply insert the desired size packers between the clamping points on the brackets.

Kit includes: 4x 1.5" packers and 4x 1.7" packers.

Pre-drilled with a 3x50.8mm PCD bolt pattern, the B-G Racing 0.5" Steering Wheel Spacer is perfect for bringing the steering wheel closer to the driver for increased steering input and driver comfort.



Material: Aluminium
Depth: 0.5 inches (12.7mm)
Fitment: 3x50.8mm PCD


B-G Steering Wheel Spacers are produced from high quality aluminium with an elegant black anodised finish, laser etched B-G logo and are simple to fit using the fixing screws provided.

Also available in sizes 1", 1.5" and 2" increments.

• First Class Design
• Impeccable Racing Pedigree
• One Year Warranty

Pre-drilled with a 3x50.8mm PCD bolt pattern, the B-G Racing 1" Steering Wheel Spacer is perfect for bringing the steering wheel closer to the driver for increased steering input and driver comfort.



Material: Aluminium
Depth: 1 inch (25.4mm)
Fitment: 3x50.8mm PCD

B-G Steering Wheel Spacers are produced from high quality aluminium with an elegant black anodised finish, laser etched B-G logo and are simple to fit using the fixing screws provided.

Also available in sizes 0.5", 1.5" and 2" increments.

• First Class Design
• Impeccable Racing Pedigree
• One Year Warranty

Pre-drilled with a 3x50.8mm PCD bolt pattern, the B-G Racing 1.5" Steering Wheel Spacer is perfect for bringing the steering wheel closer to the driver for increased steering input and driver comfort.



Material: Aluminium
Depth: 1.5 inches (38.1mm)
Fitment: 3x50.8mm PCD

B-G Steering Wheel Spacers are produced from high quality aluminium with an elegant black anodised finish, laser etched B-G logo and are simple to fit using the fixing screws provided.

Also available in sizes 0.5", 1" and 2" increments.

• First Class Design
• Impeccable Racing Pedigree
• One Year Warranty

Pre-drilled with a 3x50.8mm PCD bolt pattern, the B-G Racing 2" Steering Wheel Spacer is perfect for bringing the steering wheel closer to the driver for increased steering input and driver comfort.



Material: Aluminium
Depth: 2 inches (50.8mm)
Fitment: 3x50.8mm PCD


B-G Steering Wheel Spacers are produced from high quality aluminium with an elegant black anodised finish, laser etched B-G logo and are simple to fit using the fixing screws provided.

Also available in sizes 0.5", 1" and 1.5" increments.

• First Class Design
• Impeccable Racing Pedigree
• One Year Warranty

The B-G Steering Wheel Adaptors are produced from high quality aluminium with an elegant black anodised finish and laser etched B-G logo.



Material: Aluminium
Depth: 12.7mm
Fitment: 6x70mm & 6x74mm PCD

Multi-drilled for both 6x70mm and 6x74mm PCD bolt patterns, enabling the majority of aftermarket steering wheels to be fitted directly to a standard 3x50.8mm quick release, the B-G Racing Steering Wheel Adaptor brings the steering wheel 12.7mm closer to the driver for increased steering input and driver comfort.

• First Class Design
• Impeccable Racing Pedigree
• One Year Warranty

B-G Racing Steering wheel adaptor MOMO 6x70 to AMERICA 3 x50.8 PCD (with screws).



Material: Aluminium
Depth: 12.5mm
Fitment: 6x70mm to 3x44.07mm & 3x50.8mm PCD

B-G Steering Wheel Spacers are produced from high quality aluminium with an elegant black anodised finish and laser etched B-G logo, and are simple to fit using the fixing screws provided.

Pre-drilled with a 6x70mm, 3x44.07mm and 3x50.8mm PCD bolt pattern allowing racing steering wheels to be used with the majority of aftermarket hub kits. Perfect for those wanting to fit a Nascar wheel to their existing 6x70mm hub, or those wanting to make use of a 3x50.8mm PCD steering wheel in a vehicle equipped with a standard 6x70mm hub.

• Allows Racing Steering Wheels to Fit Aftermarket Hubs
• First Class Design
• Strong & Lightweight Construction
• Elegant Finish
• Suitable For most Aftermarket Hubs
• One Year Warranty

B-G Racing Steering wheel adaptor MOMO/NARDI to MOUNTNEY/MOTO-LITA.



Material: Aluminium
Depth: 10mm (19mm overall)
Fitment: 6x70mm & 6x74mm to 6x101mm & 9x101.6mm PCD

Pre-drilled with a 6x70mm & 6x74mm PCD bolt pattern on the inner lip, and 6x101mm & 9x101.6mm PCD bolt patterns on the outer lip, this ingenious adaptor will allow users to fit classic Mountney or Moto-Lita steering wheels with the larger 6x101mm and 9x101.6mm PCD to a Momo hub kit or any other hub kit with a 6x70 or 6x74mm bolt pattern.

The elegant, compact design will bring the steering wheel just 10mm closer to the driver, and allows for a centre ring and horn button to fit neatly and securely providing a tidy flush finish. The perfect companion for those wanting to utilise a classic steering wheel with a modern hub.

B-G Steering Wheel Adaptors are produced from high quality aluminium with an elegant black anodised finish and laser etched B-G logo, and are simple to fit using the fixing screws provided.

• Allows Classic Steering Wheels to Fit Most Aftermarket Hubs
• Bring the Steering Wheel 10mm Closer
• OEM Styling
• First Class Design
• Strong & Lightweight Construction
• Elegant Finish
• Suitable For most Aftermarket Hubs
• One Year Warranty

B-G Racing Steering wheel quick release system MOUNTNEY/MOTO-LITA to MOMO/NARDI
(with screws)



Material: Aluminium
Width: 123mm
Depth: 72mm
PCD Bolt Pattern: 6x101mm / 9x101.6mm Hub to 6x70mm / 6x74mm Steering Wheel


The B-G Steering Wheel Quick Release System allows the user to quickly and easily attach/detach the majority of aftermarket steering wheels from the hub, offering the ultimate anti-theft solution by allowing complete removal of the steering wheel when not in use.

Produced from high quality aluminium for maximum durability, the B-G Quick Release System features a push-pin mechanism to prevent premature unlocking.

Utilising a multi-drilled PCD bolt pattern, this version of the B-G Steering Wheel Quick Release System allows users to fit a modern steering wheel with a 6x70mm / 6x74mm PCD such as MOMO, Nardi or Personal to vehicles with a classic 6x101mm / 9x101.6mm PCD hub such as Mountney or Moto-Lita.

For those wanting a Quick Release Mountney or Moto-Lita steering wheel, then the addition of our BG4911 Momo/Nardi to Mountney/Moto-Lita Adaptor fitted in between the steering wheel and Quick Release will allow this function.

This Quick Release fits between the steering wheel and the hub.

WARNING: The replacement of the steering wheels on cars equipped with airbag systems will disable both the functioning of the airbag of the driver and that of the passenger or any other airbag fitted to the car. For cars equipped with airbag systems, our steering wheels are intended for racing and show use only. Do not attempt to install this kit yourself unless you have been properly trained in the installation and maintenance of car steering wheels. Do not attempt to install this kit without having previously read the instruction manual. Incorrect installation can lead to steering wheel failure which can cause an accident resulting in serious personal injury or death. Caution: Reduced steering wheel diameter will cause increased driver steering effort.

B-G Racing Steering wheel racing quick release bolt on 6x70mm PCD (with screws)



Material: Aluminium + Steel
Width: 82mm
Depth: 67mm
PCD Bolt Pattern: 6x70mm

The B-G Racing Quick Release system allows for quick and easy removal of the steering wheel from the column, making it much easier to get in and out of any race car. A master spline positioned dead centre allows the use of the steering wheel as a reference point, ensuring perfect realignment every time.

Finished in elegant black anodising and bright yellow powder coating, this B-G Racing Quick Release system is manufactured from high quality lightweight aluminium and hard wearing steel for both performance and durability.

The B-G Racing quick release system utilises a 6 x 70mm PCD bolt pattern which fits between the steering wheel and the hub, bringing the steering wheel approximately 50mm close to the driver.

WARNING: The replacement of the steering wheels on cars equipped with airbag systems will disable both the functioning of the airbag of the driver and that of the passenger or any other airbag fitted to the car. For cars equipped with airbag systems, our steering wheels are intended for racing and show use only. Do not attempt to install this kit yourself unless you have been properly trained in the installation and maintenance of car steering wheels .Do not attempt to install this kit without having previously read the instruction manual. Incorrect installation can lead to steering wheel failure which can cause an accident resulting in serious personal injury or death. Caution: Reduced steering wheel diameter will cause increased driver steering effort.

• Master Spline for Perfect Realignment Every Time
• Fits Steering Wheels and Hubs with a 6x70mm PCD
• First Class Design
• Impeccable Racing Pedigree
• High Quality Aluminium & Steel Construction
• One Year Warranty

B-G Racing Steering wheel quick release weld-on - 3 point



Material: Aluminium & Steel
Width: 57mm
Depth: 85mm
Weight: 0.26kg
Shaft Diameter: BGR700: 5/8" or BGR701: 3/4"
PCD Bolt Pattern: 3 x 50.8mm


This B-G Racing 3 Point Shaft Quick Release system is manufactured from high quality aircraft grade aluminium with a hard anodised inner splined hub for durability, and 20mm steel splined shaft available in a choice of 5/8" or 3/4" diameters that will require welding to the steering column. These are cross compatible.

The B-G Racing Quick Release system allows for quick and easy removal of the steering wheel from the column, making it much easier to get in and out of any race car. A master spline positioned dead center allows the use of the steering wheel as a reference point, ensuring perfect realignment every time.

Finished in elegant black anodising and bright yellow powder coating, this racing quick release system fully conforms to the latest FIA technical specifications.

WARNING: The replacement of the steering wheels on cars equipped with airbag systems will disable both the functioning of the airbag of the driver and that of the passenger or any other airbag fitted to the car. For cars equipped with airbag systems, our steering wheels are intended for racing and show use only. Do not attempt to install this kit yourself unless you have been properly trained in the installation and maintenance of car steering wheels .Do not attempt to install this kit without having previously read the instruction manual. Incorrect installation can lead to steering wheel failure which can cause an accident resulting in serious personal injury or death. Caution: Reduced steering wheel diameter will cause increased driver steering effort.

• Conforms to FIA Regulations
• Master Spline for Perfect Realignment Every Time
• Fits Steering Wheels with 3x50mm PCD
• First Class Design
• Impeccable Racing Pedigree
• High Quality Aluminium & Steel Construction
• One Year Warranty

B-G Racing Steering wheel quick release weld-on - 6 point



Material: Aluminium & Steel
Width: 85mm
Depth: 90mm
Weight: 0.34kg
Shaft Diameter: BGR703: 5/8" or BGR704: 3/4"
PCD Bolt Pattern: 6x70mm & 6x74mm


This B-G Racing 6 Point Shaft Quick Release System is manufactured from high quality aircraft grade aluminium with a hard anodised inner splined hub for durability, and 20mm steel splined shaft available in a choice of 5/8" or 3/4" diameters that will require welding to the steering column. These are cross compatible.

The B-G Racing Quick Release system allows for quick and easy removal of the steering wheel from the column, making it much easier to get in and out of any race car. A master spline positioned dead center allows the use of the steering wheel as a reference point, ensuring perfect realignment every time.

Finished in elegant black anodising and bright yellow powder coating, this racing quick release system fully conforms to the latest FIA technical specifications.

WARNING: The replacement of the steering wheels on cars equipped with airbag systems will disable both the functioning of the airbag of the driver and that of the passenger or any other airbag fitted to the car. For cars equipped with airbag systems, our steering wheels are intended for racing and show use only. Do not attempt to install this kit yourself unless you have been properly trained in the installation and maintenance of car steering wheels .Do not attempt to install this kit without having previously read the instruction manual. Incorrect installation can lead to steering wheel failure which can cause an accident resulting in serious personal injury or death. Caution: Reduced steering wheel diameter will cause increased driver steering effort.

• Conforms to FIA Regulations
• Master Spline for Perfect Realignment Every Time
• Fits Steering Wheels with 6x70mm or 6x74mm PCD
• First Class Design
• Impeccable Racing Pedigree
• High Quality Aluminium & Steel Construction
• One Year Warranty

B-G Steering wheel spacers are designed to bring the steering wheel closer to the driver for improved steering input and driver comfort.



Material: Aluminium
Depth: 100mm
Fitment: 6x70mm & 6x74mm PCD

The B-G Racing 100mm Steering Wheel Spacer which comes in a black anodised finish is made from high quality aluminium and comes complete with fixing screws.

Multi-drilled for both 6x70mm and 6x74mm PCD bolt patterns to accommodate the majority of aftermarket steering wheels, enabling cross compatibility between hub kits and steering wheels with either 6x70mm or 6x74mm PCD patterns. This means you can use your MOMO steering wheel with your Nardi-Personal hub kit or vice versa. Can also be utilised as a simple hub spacer when used with a steering wheel and hub kit with identical PCD bolt patterns.

The B-G Racing Steering Wheel Spacer is also available in sizes: 10mm, 20mm, 40mm, 60mm, 80mm and 120mm, sold separately.

• First Class Design
• Impeccable Racing Pedigree
• Suitable for Simulators
• One Year Warranty

Please Note: If you need to fit a horn button in the centre of your steering wheel, please also purchase the B-G Racing Low Profile Horn Button Retaining Ring.