Rear Spoilers / Aerofoil

The GT3 RS look rear spoiler complete with factory style side brackets, Triple Air Scoops . The top plane spoiler comes with deflecting straight side wing lets.

The boot lid has Triple Air Scoops fitted

Fits:
Porsche 997 MKI
Porsche 997 MKII 2009>>

Porsche 997 Turbo *will require a 997 Carrera deck lid fan 99762404601 & may also need to slightly modify the air box to stop the fan from touching it

Material:
Made from Fibre Glass GRP

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99751220004

The product you are viewing cross references to these numbers

3" eRam Kit™ electric wing system for 997 Turbo
Closest height version for Cabriolet

Do not risk Pentosin® Power Steering fluid leaks into your engine bay or down the bumper. Extensively designed and engineered to permanently fix the overly complex and troublesome factory hydraulic mechanism. Since 2015, our eRam Kit™ is the best permanent economical solution to maintain a fully functional wing!

The dealer wants up to £1000's to replace a troublesome hydraulic mechanism. Others offer a rebuild service, simply tearing down and repairing the same failure prone mechanism, often using solvents to swell internal o-rings. Another offers shiny aftermarket parts for the internal hydraulic mechanism made from stainless instead of brass. They do not even attempt to call it a permanent solution, claiming it is "easy" to change out cheap internal o-rings to refill and bleed the mechanism when it fails again… Who wants to go through that EVER let alone more than once? It is only a matter of time until hot engine bay conditions destroy one of many hydraulic components that are failure prone!
The eRam Kit™ wing elevator consists of two pre-assembled self-contained electric Rams that simply bolt onto the engine lid with absolutely NO modifications. The eRam Kit™ includes a small electronic "MicroModule Device™" that connects to the factory wiring and prevents the dreaded SPOILER WARNING. Nearly plug and play! WORKS EXACTLY LIKE THE FACTORY MECHANISM.

The patented eRam Kit™ comes with two self-contained electric eRams, all fittings, fasteners, electrical connections, and the tiny MicroModule Device™ which prevents the spoiler warning. No cutting, drilling or modification to any part of the car. Easy install – about the same skill level as changing brake pads. Installation of the eRam Kit™ takes about 2 hours for anyone with any mechanical skill. Most customers install the eRam Kit™ themselves using our illustrated instruction guide and video (sent with purchase). Easily maintained – no special tools needed. Easily modified – for example to exchange for different length rams or to add Dust & Moisture Boots.

Fits:
Porsche 997 Turbo

Click 'Zoom in' for large parts diagram.
Diagram ref no 2 (LEFT) & 3 (RIGHT)

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

EK7-3-S

The product you are viewing cross references to these numbers

4.8" eRam Kit™ electric wing system for 997 Turbo
Similar height to GT3 and GT4 wings, provides Superior Downforce.

Do not risk Pentosin® Power Steering fluid leaks into your engine bay or down the bumper. Extensively designed and engineered to permanently fix the overly complex and troublesome factory hydraulic mechanism. Since 2015, our eRam Kit™ is the best permanent economical solution to maintain a fully functional wing!

The dealer wants up to £1000's to replace a troublesome hydraulic mechanism. Others offer a rebuild service, simply tearing down and repairing the same failure prone mechanism, often using solvents to swell internal o-rings. Another offers shiny aftermarket parts for the internal hydraulic mechanism made from stainless instead of brass. They do not even attempt to call it a permanent solution, claiming it is "easy" to change out cheap internal o-rings to refill and bleed the mechanism when it fails again… Who wants to go through that EVER let alone more than once? It is only a matter of time until hot engine bay conditions destroy one of many hydraulic components that are failure prone!
The eRam Kit™ wing elevator consists of two pre-assembled self-contained electric Rams that simply bolt onto the engine lid with absolutely NO modifications. The eRam Kit™ includes a small electronic "MicroModule Device™" that connects to the factory wiring and prevents the dreaded SPOILER WARNING. Nearly plug and play! WORKS EXACTLY LIKE THE FACTORY MECHANISM.

The patented eRam Kit™ comes with two self-contained electric eRams, all fittings, fasteners, electrical connections, and the tiny MicroModule Device™ which prevents the spoiler warning. No cutting, drilling or modification to any part of the car. Easy install – about the same skill level as changing brake pads. Installation of the eRam Kit™ takes about 2 hours for anyone with any mechanical skill. Most customers install the eRam Kit™ themselves using our illustrated instruction guide and video (sent with purchase). Easily maintained – no special tools needed. Easily modified – for example to exchange for different length rams or to add Dust & Moisture Boots.

Fits:
Porsche 997 Turbo

Click 'Zoom in' for large parts diagram.
Diagram ref no 2 (LEFT) & 3 (RIGHT)

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

EK7-4.8-S

The product you are viewing cross references to these numbers

4" eRam Kit™ electric wing system for 997 Turbo
Creates very excellent downforce, wing looks great when up.

Do not risk Pentosin® Power Steering fluid leaks into your engine bay or down the bumper. Extensively designed and engineered to permanently fix the overly complex and troublesome factory hydraulic mechanism. Since 2015, our eRam Kit™ is the best permanent economical solution to maintain a fully functional wing!

The dealer wants up to £1000's to replace a troublesome hydraulic mechanism. Others offer a rebuild service, simply tearing down and repairing the same failure prone mechanism, often using solvents to swell internal o-rings. Another offers shiny aftermarket parts for the internal hydraulic mechanism made from stainless instead of brass. They do not even attempt to call it a permanent solution, claiming it is "easy" to change out cheap internal o-rings to refill and bleed the mechanism when it fails again… Who wants to go through that EVER let alone more than once? It is only a matter of time until hot engine bay conditions destroy one of many hydraulic components that are failure prone!
The eRam Kit™ wing elevator consists of two pre-assembled self-contained electric Rams that simply bolt onto the engine lid with absolutely NO modifications. The eRam Kit™ includes a small electronic "MicroModule Device™" that connects to the factory wiring and prevents the dreaded SPOILER WARNING. Nearly plug and play! WORKS EXACTLY LIKE THE FACTORY MECHANISM.

The patented eRam Kit™ comes with two self-contained electric eRams, all fittings, fasteners, electrical connections, and the tiny MicroModule Device™ which prevents the spoiler warning. No cutting, drilling or modification to any part of the car. Easy install – about the same skill level as changing brake pads. Installation of the eRam Kit™ takes about 2 hours for anyone with any mechanical skill. Most customers install the eRam Kit™ themselves using our illustrated instruction guide and video (sent with purchase). Easily maintained – no special tools needed. Easily modified – for example to exchange for different length rams or to add Dust & Moisture Boots.

Fits:
Porsche 997 Turbo

Click 'Zoom in' for large parts diagram.
Diagram ref no 2 (LEFT) & 3 (RIGHT)

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

EK7-4-S

The product you are viewing cross references to these numbers

Aluminium Black Mesh 'Diamond' Style - Mesh size: 100cm x 40cm Universal Product

Product description:

- Piece of powder coated mesh grill in size 100cm x 40cm
- Brand new product as shown in the photo below
- Hole size: 6mm x 4mm
-Thickness: 2mm
- Ideal for mounting in Bumpers, Bonnet intakes etc.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99950555555

The product you are viewing cross references to these numbers

Bi-Plane Rear Spoiler Type GT for improved down force and aerodynamics. made from high grade GRP
material. Does not include fixings.

Fits:
Porsche 997 Turbo

* Please note the section for the 3rd brake light is out lined but not cut out so this spoiler are be used with or without the 3rd brake light. The 3rd brake light part number is 99763105201

If needed your body shop will need to make make the cut out. This is a fibre glass after market products and will require preparation before fitting.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99751222199GRP

The product you are viewing cross references to these numbers

Cover between spoiler and rear window for Porsche 911/997

• Cover for Porsche 911/997 Coupé from 2004-2012
• suitable for the model / body variant (s) Coupé
• suitable in combination with rear wing HF496 and HF488
• closes the gap between the spoiler and the rear window

• Front spoiler lip is made of the innovative and high-quality material Fiberflex. The advantages of this new type of composite material: extremely high flexibility combined with great stability, splinter resistance and non-flammability. A very high production quality and low weight even allow use in professional racing. The characteristic black surface is characterised by good processing options and guarantees professional results. Thanks to its excellent cutting and adhesive properties, Fiberflex products from are ideally suited for repair and other remodeling work.

• Uniform surface structure enables painting without much preparatory work (product is unpainted)

• Cover can be used instead of Porsche Original ET No. 997504345A1GRV (It is not a Porsche original part!)

• Material is flexible

Please note: This is a special-order item, can take 8-12 weeks to be delivered and once ordered cannot be cancelled.

DUST & MOISTURE BOOTS
Rubber boot set to protect your eRam Kit™ investment.

Fits:
Porsche 996 Turbo 2001-2005
Porsche 997 Turbo 2007-2009
Porsche 997 Turbo 2009-2013

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

EK-BOOTS

The product you are viewing cross references to these numbers

Rear spoiler for Porsche 997 CARRERA built from 2006 for variant Coupe.

*does not fit cabrio



• The angle adjustable rear wing paintable fiberglass (Fibre glass not carbon).
• Engine covers, cover incl RAM AIR system for better supply of fresh air - noticeably more power and higher top speed
• Improved aerodynamic properties and freely selectable pressure
• Wing has six parts

• Rear spoiler is manufactured from high quality fiberglass material.
• Excellent surface structure allows simple and inexpensive painting (Product is not painted).
• The spoiler will require minor alteration and modifications to ensure the perfect fit.

Please note: This is a special-order item, can take 8-12 weeks to be delivered and once ordered cannot be cancelled.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

HF911B

The product you are viewing cross references to these numbers

Rear spoiler / Rear wing for Porsche 911 (997) 2004-2012. Suitable for all models
two-piece



• There is currently no TÜV certificate,
• Mounting accessories, if required
• assembly Instructions
• Rear spoiler is made of the innovative and high-quality material
• Uniform surface structure allows painting without much preparatory work (Product is not painted)

Please note: This is a special-order item, can take 8-12 weeks to be delivered and once ordered cannot be cancelled.

2" eRam Kit™ electric wing system for 997 Turbo
Up/Down Speed of 5 sec
NOT RECOMMENDED FOR CABRIO

Do not risk Pentosin® Power Steering fluid leaks into your engine bay or down the bumper. Extensively designed and engineered to permanently fix the overly complex and troublesome factory hydraulic mechanism. Since 2015, our eRam Kit™ is the best permanent economical solution to maintain a fully functional wing!

The dealer wants up to £1000's to replace a troublesome hydraulic mechanism. Others offer a rebuild service, simply tearing down and repairing the same failure prone mechanism, often using solvents to swell internal o-rings. Another offers shiny aftermarket parts for the internal hydraulic mechanism made from stainless instead of brass. They do not even attempt to call it a permanent solution, claiming it is "easy" to change out cheap internal o-rings to refill and bleed the mechanism when it fails again… Who wants to go through that EVER let alone more than once? It is only a matter of time until hot engine bay conditions destroy one of many hydraulic components that are failure prone!
The eRam Kit™ wing elevator consists of two pre-assembled self-contained electric Rams that simply bolt onto the engine lid with absolutely NO modifications. The eRam Kit™ includes a small electronic "MicroModule Device™" that connects to the factory wiring and prevents the dreaded SPOILER WARNING. Nearly plug and play! WORKS EXACTLY LIKE THE FACTORY MECHANISM.

The patented eRam Kit™ comes with two self-contained electric eRams, all fittings, fasteners, electrical connections, and the tiny MicroModule Device™ which prevents the spoiler warning. No cutting, drilling or modification to any part of the car. Easy install – about the same skill level as changing brake pads. Installation of the eRam Kit™ takes about 2 hours for anyone with any mechanical skill. Most customers install the eRam Kit™ themselves using our illustrated instruction guide and video (sent with purchase). Easily maintained – no special tools needed. Easily modified – for example to exchange for different length rams or to add Dust & Moisture Boots.

Fits:
Porsche 997 Turbo

Click 'Zoom in' for large parts diagram.
Diagram ref no 2 (LEFT) & 3 (RIGHT)

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

EK7-2-SS

The product you are viewing cross references to these numbers

Rear spoiler electric rams pump Porsche 997TT



Fits:
Porsche 997 Turbo



Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99751294300

The product you are viewing cross references to these numbers

The GT3 RS look rear spoiler complete with factory style side brackets, One Piece Twin Air Scoops . The top plane spoiler comes with deflecting straight side wing lets.

The boot lid has One Piece Twin Air Scoops fitted

Fits:
Porsche 997 MKI
Porsche 997 MKII 2009>>

Porsche 997 Turbo *will require a 997 Carrera deck lid fan 99762404601 & may also need to slightly modify the air box to stop the fan from touching it

Material:
Made from Fibre Glass GRP

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99751220003

The product you are viewing cross references to these numbers