Suspension Control Units

Cancellation Kit for PASM 

Fits:
Porsche 997 - 2005 to 2012
Porsche 991 - 2012 to 2019
Porsche 992 - 2019 Onwards
Porsche 987 Boxster / Cayman - 2005 to 2012
Porsche 981 Boxster / Cayman - 2012 to 2016
Porsche 718 Boxster / Cayman - 2017 Onwards

This kit prevents dash fault codes from appearing when replacing original electronically controlled PASM type shocks/dampers with conventional shocks or coilovers on Porsche cars.

These modules plug into the control harness in place of the original PASM shocks, emulating their behavior. This satisfies the vehicle ECU tests and prevents the fault messages.

• Eliminates PASM fault messages
• Works with all Porsche cars originally PASM equipped
• May work on other vehicles
• Easy installation, no programming

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

2350001

The product you are viewing cross references to these numbers

Cancellation module kit for PASM - Cabriolet only

Fits:  
Porsche 997.1 Carrera 2 / Carrera 4 - 2005 to 2008
Porsche 997.1 Carrera 2S / Carrera 4S - 2005 to 2008
Porsche 997.1 turbo - 2007 to 2008
Porsche 997.2 Carrera 2 / Carrera 4 - 2009 to 2012
Porsche 997.2 Carrera 2S / Carrera 4S - 2009 to 2012
Porsche 997.2 turbo - 2009 to 2012
Cabriolet models only

Electronically controlled shock absorbers are becoming more common, but there is also often the call for a more sporty set-up. And while the installation of a conventional aftermarket system is a technically very smooth process, there may be some irritating error messages because the electronic damper control doesn't get a grip on it. H&R cancellation kits prevent error messages of the on-board electronics, however, the function of the control unit remains fully intact.

The modules deactivate the standard electronic damper control and thus make the new suspension effective. 

Cancellation module kit for PASM - Coupe and Targa only

Fits:  
Porsche 997.1 Carrera 2 / Carrera 4 - 2005 to 2008
Porsche 997.1 Carrera 2S / Carrera 4S - 2005 to 2008
Porsche 997.1 turbo / GT2 - 2007 to 2008
Porsche 997 GT3 / GT3 RS - 2007 to 2012
Porsche 997.2 Carrera 2 / Carrera 4 - 2009 to 2012
Porsche 997.2 Carrera 2S / Carrera 4S - 2009 to 2012
Porsche 997.2 turbo / GT2 - 2009 to 2012
Coupe and Targa models only

Electronically controlled shock absorbers are becoming more common, but there is also often the call for a more sporty set-up. And while the installation of a conventional aftermarket system is a technically very smooth process, there may be some irritating error messages because the electronic damper control doesn't get a grip on it. H&R cancellation kits prevent error messages of the on-board electronics, however, the function of the control unit remains fully intact.

The modules deactivate the standard electronic damper control and thus make the new suspension effective. 

Suspension PASM track & street Controller.

All non-turbo 997.1 / 987.1 vehicles require the installation of a 3-axis accelerometer to gather g-force data.

Installation takes about one hour to complete and wiring instructions are included.

Suspension PASM track & street Plug N Play Controller.



Fits
Porsche 997.1
models with factory-equipped PASM

**Note: 3-axis Accelerometer product code DSC12121 is required.

The DSC Sport V1 is a simple Plug N Play controller that replaces the factory PASM controller, offering both improved track performance and street comfort. The easiest install of all DSC Sport products, the V1 Plug N Play takes under 5 minutes to install and requires no tools. Like all DSC Sport controllers, the DSC Sport V1 Plug N Play Controller allows users to tune by g-force, brake pressure, acceleration, speed, steering, and control the effective damping range via shock calibration.

Suspension PASM track & street Plug N Play Controller.



Fits:
Porsche 997.1 Turbo
Porsche 997.2 all models with factory-equipped PASM .

The DSC Sport V1 is a simple Plug N Play controller that replaces the factory PASM controller, offering both improved track performance and street comfort. The easiest install of all DSC Sport products, the V1 Plug N Play takes under 5 minutes to install and requires no tools. Like all DSC Sport controllers, the DSC Sport V1 Plug N Play Controller allows users to tune by g-force, brake pressure, acceleration, speed, steering, and control the effective damping range via shock calibration.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

01-9972-00-V1

The product you are viewing cross references to these numbers